This internet browser is outdated and does not support all features of this site. Please switch or upgrade to a different browser to display this site properly.

Student
Staff
Alumni
Library
OASIS
Moodle
eStudent
Curtin ePay

Home
About
Study
Research
- Graduate School
- How to apply - Higher Degree by Research
News & Events
Contact

Ready to apply?

Apply now

Student
Alumni
Library
Moodle
eStudent
Curtin ePay

Apply

Home > Curtin Malaysia > About > Learning and Teaching > Faculty of Engineering and Science > Departments > Mechanical and mechatronic engineering

Mechanical and mechatronic engineering

About us

Mechanical and mechatronic engineering is the study of the systems or objects in motion. It touches almost every aspect of modern-day life starting from automobiles, power plants, aircraft, mobile phones, biomedical devices and so on. Mechanical engineering graduates play key roles in a wide range of industries such as aerospace, oil and gas, energy generation, automotive, shipping, manufacturing and construction, design, biotechnology, mechatronic, robotics, computer, automation, and modern-day electromechanical systems.

The department offers the following undergraduate programs:

Bachelor of Engineering (Honours) in Mechanical Engineering
Master of Philosophy (by Research) in Mechanical Engineering
Doctor of Philosophy in Mechanical Engineering

Close-up of a mechanic's hands working on an engine in a modern workshop.

Accreditation

Our courses are accredited by:

Engineers Australia (EA)
Board of Engineers Malaysia (BEM)
Malaysian Qualifications Agency (MQA)

Message from the Head of Department

Welcome to the Mechanical Engineering Department at Curtin University Malaysia. Established in 2000, the department has grown into a dynamic hub for quality education, impactful research, and strong industry engagement. We aspire to be recognized globally for excellence in mechanical engineering and are committed to delivering innovative teaching, research, and community service.

Assoc Prof Dr Moola Mohan Reddy
Head of Department, Mechanical and Mechatronic Engineering

PEO and PO

Program Educational Objectives (PEO) and Program Outcomes (PO) for mechanical and mechatronic engineering

Mechanical engineering

PEOs

PEO1: Have high level of technical competency combined with research and problem-solving skills to generate innovative solutions in mechanical engineering or related areas
PEO2: Be able to communicate effectively to various stakeholders and practice their profession with high regard to societal needs, diversity, constraints in the professional workplace and ethical responsibilities
PEO3: Continuously updating themselves in areas and technologies that are relevant to their career, participate in personal development and increasing their understanding of matters that are current and important to society at national and international levels

POs

PO1 Engineering knowledge: A sound working knowledge of mathematics, science, engineering fundamentals and engineering specialization to the solution of complex mechanical engineering problems
PO2 Problem analysis: Ability to identify, formulate, research literature and analyze complex engineering problems using first principles of mechanical engineering knowledge
PO3 Design/development of solutions: Ability to apply systematic approach to complex engineering problems solution, design and performance evaluation that meet specified requirements with appropriate consideration for public health and safety, culture, society and environment
PO4 Investigation: Ability to conduct research and investigation into complex problems using engineering research methods for knowledge discovery
PO5 Modern tool usage: Ability to create, select and apply appropriate techniques, resources, and modern engineering and IT tools to complex engineering activities, with an awareness of the assumptions and limitations
PO6 The engineer and society: Ability to apply appropriate reasoning to assess contemporary societal, health, safety, legal and cultural issues as well as the consequent responsibilities relevant to professional engineering practice
PO7 Environment and sustainability: Understand the impact of professional engineering solutions in societal and environmental contexts and demonstrate knowledge of and need for sustainable development
PO8 Ethics: Demonstrate professional ethical principles and responsibilities and commit to norms of mechanical engineering practice
PO9 Individual and team work: Ability to communicate effectively on complex engineering activities with the engineering community and with society at large
PO10 Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions
PO11 Project management and finance: Ability to manage projects in multidisciplinary environments using engineering management principles at one’s own work, as a team and leader, to satisfy stakeholders requirements
PO12 Life-long learning: Recognize the need for lifelong learning with the capacity to learn both independently and as part of a group in the broadest context of technological change

Mechatronic engineering

PEOs

PEO1: Graduates have technical competency combined with research and problem-solving skills in mechatronic engineering or related area, including supportive or managerial leadership roles
PEO2: Graduates are effective communicators, committed to professional ethics and sustainability
PEO3: Graduates are able to engage in life-long learning in their career progression at national and international levels

POs

PO1 Engineering knowledge:Apply the theory of mathematics, science, and mechatronic engineering fundamentals for solving the complex engineering problems
PO2 Problem analysis: Identify, formulate and analyze complex mechatronic engineering problems using the principles of mathematics, science and engineering
PO3 Design/development of solutions: Apply creative thinking to solve complex mechatronic engineering problems; verify and implement the solutions with appropriate consideration for public health and safety, cultural, societal, and environmental considerations
PO4 Investigation: Investigate complex mechatronic engineering problems to acquire conclusions by design of experiments, analysis of data, and synthesis of information using research-based knowledge and methods
PO5 Modern tool usage: Select and apply appropriate techniques, resources and modern engineering tools, including prediction and modelling, to design, analyze and verify the mechatronic engineering systems and their components
PO6 The engineer and society: Apply international standards, practices and conventions appropriate to mechatronic engineering
PO7 Environment and sustainability: Understand the impact of mechatronic engineering solutions in societal and environmental contexts and demonstrate knowledge of and need for sustainable development
PO8 Ethics: Commit to and behave in accordance with the professional and ethical responsibilities of engineers
PO9 Individual and team work: Function effectively within a typical multidisciplinary and multi-cultural engineering team as a member, manager or team leader, recognizing individual human rights
PO10 Communication: Document mechatronic engineering information to meet technical and legal requirements; communicate effectively on complex engineering activities with the engineering community and the society through written, oral and electronic forms
PO11 Project management and finance: Demonstrate knowledge of engineering and management principles as a member and leader in a team, in managing multidisciplinary environments
PO12 Life long learning: Recognise the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change in mechatronic engineering

Our people

Name	Position
Assoc Prof Dr Moola Mohan Reddy	Head of Department, Associate Professor
Prof Dr Sujan Debnath	Professor
Assoc Prof Dr Law Ming Chiat	Associate Professor
Assoc Prof Ir Dr Lim Chye Ing	Associate Dean of External Engagement, Associate Professor
Abdul Hamid Bin Abdullah	Program Coordinator, Senior Lecturer
Ir Ted Sun Loh	Adjunct Lecturer
Assoc Prof Dr Jundika Candra Kurnia	Associate Professor
Ir Tian Fung Wang	Senior Lecturer, Program Coordinator
Ts Dr Fethma M Nor	Lecturer
Dr Kyaw Myo Aung	Senior Lecturer
Dr Wahyu Caesarendra	Senior Lecturer
Dr Nurul Amira Mohd Ramli	Lecturer
Dr Mouaz Al Kouzbary	Lecturer
Dr Min Khant	Teaching Fellow

Departments

Applied sciences
Chemical and energy engineering
Civil and construction engineering
Electrical and computer engineering
Mechanical and mechatronic engineering

Campuses

Australia
Colombo
Dubai
Malaysia
Mauritius
Singapore

Teaching areas

Office of Learning and Teaching
Faculty of Business
Faculty of Engineering and Science
Faculty of Humanities and Health Sciences
School of Pre-U and Continuing Education

Ministry of Education Registration Number : KPT/JPT/DFT/US/Y02 DULN003(Q).
Curtin University, Malaysia is owned and managed by Curtin (Malaysia) Sdn Bhd 199801008086 (464213-M).

Copyright
Disclaimer
Privacy
UGC Statement
Accessibility
Personal Data Protection Notice

CRICOS Provider Code 00301J.

Message from HOD

Welcome to the Mechanical Engineering Department at Curtin University Malaysia. Established in 2000, the department has grown into a dynamic hub for quality education, impactful research, and strong industry engagement. We aspire to be recognised globally for excellence in mechanical engineering and are committed to delivering innovative teaching, research, and community service.

Our programs are supported by modern facilities and a dedicated team of experienced academic and technical staff. Through close collaboration with industry and government, we provide practice-oriented learning that equips our students with the knowledge, skills, and adaptability needed for successful careers across diverse sectors, including energy, manufacturing, automotive, aerospace, and emerging technologies.

Mechanical engineering graduates are not only prepared for technical roles but also excel in leadership, management, and entrepreneurial pathways. Our four-year honours program fosters creative thinking, strong analytical ability, and teamwork—essential qualities for solving real-world engineering challenges and shaping future innovations.

In addition to our undergraduate program, we offer postgraduate research degrees (MPhil and PhD) that contribute to advancing knowledge and addressing industry needs through meaningful research collaborations.

Located in the vibrant coastal city of Miri, our campus offers a welcoming, multicultural environment that enriches the student experience. Our Bachelor of Engineering (Honours) in Mechanical Engineering is fully accredited by the Board of Engineers Malaysia (BEM), Engineers Australia (EA), and recognised by the Malaysian Qualifications Agency (MQA).

We invite you to join us and be part of a community dedicated to engineering excellence and innovation.

Assoc Prof Dr Moola Mohan Reddy
Head of the Mechanical and Mechatronic Engineering Department

Moola Mohan Reddy

PhD, MTech, CEng, FHEA
Head of Department, Mechanical and Mechatronic Engineering Department

Location: Skylark 3, Room 317
Tel: +60 85 630100 Ext:2473
Email: mohan.m@curtin.edu.my

Research interests

Advanced materials and manufacturing

Selected publications

MM Reddy, Sim Lih Shenq, Prabhu Sethuramalingam, 2022, “Fuzzy logic expert system-based machinability analysis in end milling of aluminium nitride ceramic” International Journal of Machining and Machinability of Materials, Vol 24, issue 1-2, 92-109, Inderscience.
Suen Ji Wei, Naveen Kumar Elumalai, Sujan Debnath, Lim Chye, Moola Mohan Reddy, Nabisab Mujawar Mubarak, Alokesh Pramanik 2022, “Effect of Concentration of Electrolyte Solution on the Electrochemical Stability of Ionogel” Materials Science Forum, Vol 1064, 65-70, Trans Tech Publications.
CY Sim, MM Reddy, P Sethuramalingam, 2022, “Fuzzy logic expert system based machinability simulation analysis on nickel based alloy steel” International Journal on Interactive Design and Manufacturing 1063-1077, Springer.
GWA Kui, S Islam, MM Reddy, N Khandoker, VLC Chen, 2021 “Recent progress and evolution of coolant usages in conventional machining methods: a comprehensive review”, The International Journal of Advanced Manufacturing 1-38, Springer
UMR Paturi, NS Reddy, S Cheruku, SKR Narala, KK Cho, MM Reddy, 2021“ Estimation of coating thickness in electrostatic spray deposition by machine learning and response surface methodology” Surface and Coatings Technology 422, Elsevier
MM Reddy, LCS William, 2020 “Finite element analysis : Predicting cutting force in turning of Inconel 625 using ceramic tools”, Materials Science and Engineering 943 (1), 012019
AWT An, S Debnath, VLC Chen, MM Reddy, A Pramanik, 2020 “Degradation Behaviour of Nanosilica Enhanced Oil Palm Empty Fruit Bunch Fiber Epoxy Composites” Solid State Phenomena 305, 28-35
MM Reddy, S. R. Kostka, NS Reddy, 2020 “dentifying Optimal Cutting Parameters in Drilling of Titanium Aluminum Vanadium Using Finite Element Analysis”, Journal of Surface Engineered Materials and Advanced Technology 10, 55-62
MM Reddy, NS Reddy, JN Evan, 2020 “Experimental Evaluation in Dry Machining of Inconel 718 Using Coated Carbides”, Journal of Engineering Research and Reports, 1-11
MM Reddy, WS Sng, 2019 “Temperature and Cutting Force Analysis in Turning of Steel AISI 4140 using Advanced Ceramics tools”, Materials Science and Engineering 495 (1), 012090
YS Dambatta, M Sayuti, AAD Sarhan, M Hamdi, SM Manladan, MM Reddy, 2019 “Tribological performance of SiO2-based nanofluids in minimum quantity lubrication grinding of Si3N4 ceramic”, Journal of Manufacturing Processes 41, 135-147
B Sarkar, MM Reddy, S Debnath, 2019 “Experimental investigation of the influence of cutting parameters on surface roughness in machining Inconel 718”, Automatic Control, Mechatronics and Industrial Engineering, 239-244.
MM Reddy, VYC Nie, 2019 “Evaluation of Surface Roughness and Tool Wear in High Speed Machining of Inconel 718”, Materials Science Forum 943, 66-71
S Debnath, MM Reddy, A Pramanik, 2019 “Dry and Near-Dry Machining Techniques for Green Manufacturing”, Innovations in Manufacturing for Sustainability, 1-27
CH Hoe, Reddy M M, Lee V C C and Debnath S, 2018 “Chatter behavior in the Milling Process of Inconel 718: Effects of Tool Edge Radius”, MATEC Web of Conferences, 202, 02006
Chien S E M, Reddy M M, Lee V C C and Debnath S, 2017. “The Study of Coated Carbide Ball End Milling Tools on Inconel 718 Using Numerical Simulation Analysis to Attain Cutting Force and Temperature Predictive Models at the Cutting Zone”, Materials Science Forum, 882, pp 28-35
Sujan, D., Reddy, M.M. and Qua S.Y. (2016) “Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method”, Measurement, Vol 78, pp 111-119
Reddy, M.M., Joshua, C.X.H. (2016) “Performance of Silicon carbide whisker reinforced ceramic inserts on Inconel 718 in end milling process”, IOP Conference Series: Materials Science and Engineering, 121, 012005
Reddy, M.M., Sujan, D. and Lee L.C. (2015) “Modeling of Temperature Distribution when Machining Inconel 718 in Turning process”, Power Electronics and Energy Engineering, pp 207-210
Reddy, M.M., Alexander, G., Abou El, H.K.A. and Sujan, D. (2014) “Machinability of Aluminum Nitride Ceramic using TiAlN and TiN Coated Carbide Tool Insert”, Materials Science Forum, 773-774: 445-455
Sujan, D, Pang, X.B., Rahman, M.E., and Reddy, M.M. (2014) “Performance of Solder Bond on Thermal Mismatch Stresses in Electronic Packaging Assembly”, Materials Science Forum, 773-774: 242-249
Alexander, G. and Reddy, M.M. (2014) “Advanced Ceramics: Some Challenges and Solutions in Machining by Conventional Methods”, Applied Mechanics and Materials, 624: 42-47
Ng Samuel, D., Sujan, D., Rahman, M.E., Nabinejad, O., and Reddy, M.M. (2014). “Oil Palm Fibre and Nano-Silica Reinforced Epoxy Composite Material”, Applied Mechanics and Materials, 980: 23-27
Sujan, D., Reddy, M.M. and Qua S.Y. (2014) “Environmental friendly cutting fluids and cooling techniques in machining: a review” Journal of Cleaner Production, 83:33-47
Nabinejad, O., Sujan, D., Rahman, M.E., Reddy, M.M., Liew, W.Y.H., Davies, IJ. (2014) “The effect of alkali treatment of OPKS filler on mechanical property of polyester-composite”, Advanced Materials Research, 980, 86-90
Reddy, M.M., Alexander, G., Abou El, H.K.A. and Sujan, D. (2013) “Surface Roughness Model when Machining Aluminum Nitride Ceramic with Two Flute Square end Micro Grain Solid Carbide end Mill”, Advanced Materials Research, 747 :282-286
Reddy, M.M., Alexander, G., and Abou El, H.K.A. (2012) “Optimization of various cutting parameters on the surface roughness of the machinable glass ceramic with two flute square end mills of micro grain solid carbide”, International Journal of Precision Engineering and Manufacturing, 13(9), 1549-1554
Reddy, M.M., Alexander, G., Abou El H.K.A., Sujan, D., Ali, M.Y. and Malique, M.A. (2012) “Tool wear analysis in end milling of advanced ceramics with TiAlN and TiN coated carbide insert”, Advanced Materials Research, 576:76-79
Sujan, D., Yeo, C.W., Rahman, M.E., Reddy, M.M., Maleque, M.A. and Ali, M.Y. (2012) “Aluminum-Silicon Carbide Composites for Enhanced Physio-Mechanical Properties” Advanced Materials Research, 576:370-373
Reddy, M.M., Alexander, G. and Abou El, H.K.A. (2011) “Influence of cutting parameters on Machinable Glass ceramic processed by end milling”, Advanced Materials Research, 264-265:825-830
Reddy, M.M., Alexander, G. and Abou El, H.K.A. (2011) “Development of cutting force model for aluminum nitride ceramic processed by micro end milling”, Applied Mechanics and Materials, 87:223-229
Reddy, M.M., Alexander, G. and Abou El, H.K.A. (2011) “Surface roughness prediction in end milling of machinable glass ceramic and optimization by response surface methodology”, Advanced Materials Research, 189:1376-1381
Reddy, M.M., Alexander, G. and Abou El, H.K.A. (2011) “Predictive surface roughness model for end milling of machinable glass ceramic”, IOP Science conference: Materials Science and Engineering, 17, 012002
Reddy, M.M., Alexander, G. and Abou El, H.K.A. (2011) “Surface roughness prediction in the end milling parameters of aluminum nitride ceramic by response surface methodology”, Advanced Materials Research, 154-155:626-633

Research grants and consultancy projects

FRGS Grant (2019-2021): Project Leader
Project Title: “Impact of palm oil based minimum quantity of lubrication on machinability of Ti and its alloy (Ti-6Al-4V)s” (completed).
FRGS Grant (2014-2017): Project Leader
Project Title: “Enhancing machining of Nickel superalloys using advanced tools in end milling operations” (compleated).
MOSTI (e – science fund) Grant (2007 – 2010): Project Leader
Project Title: “Micromachining of advanced Ceramics by Conventional and Non-Conventional Methods” (completed).
CSCR Grant (2010-2012): Co- Investigator
Project Title: “Innovation design and fabrication of car gear rotor by using Al2TiO5–Based functional graded materials” (completed).
CSRF Grant (2006 – 2007): Co- Investigator
Project Title: “Predictive Modeling of Surface roughness when End Milling of mould Steels using Carbide cutting inserts” (completed).
CSRF Grant (2006 – 2007): Co- Investigator
Project Title: “Modeling and analysis of a thermal storage Air conditioning system: The energy cost saving effect in Malaysia” (completed).

Professional experience

Associate Professor, Mechanical Engineering Department, Faculty of Engineering Science, Curtin University Malaysia, Dec 2015 to present
Senior Lecturer, Mechanical Engineering Department, School of Engineering and Science, Curtin University Malaysia, 2011 to 2015
Lecturer, Mechanical Engineering Department, School of Engineering and Science, Curtin University Malaysia, 2004 to 2010
Lecturer, Mechanical Engineering Department, Jimma University, Jimma, Ethiopia, 2002 to 2004
Lecturer, Mechanical Engineering Department, SRM University, Chennai, India, 1999 to 2002

Professional associations

Chartered Engineer (India)
Member, Engineers Australia
Member, Institution of Engineers (India)
Graduate Engineer, Board of Engineers, Malaysia (BEM)
Fellow, Advance HE (UK)

Sujan Debnath

PhD, ME, CEng, MIMechE, SFHEA, FIMM
Professor, Mechanical and Mechatronic Engineering Department

Location: Skylark 3, Room 412
Tel: +60 85 630100 Ext:2472
Email: d.sujan@curtin.edu.my

Research profiles

Google Scholar: https://scholar.google.com.my/citations?user=-jlIk9AAAAAJ&hl=en
Linkedin: https://my.linkedin.com/in/sujan-debnath-2b4b9278
WOS: https://www.webofscience.com/wos/author/record/Y-6667-2018
ORCID: https://orcid.org/0000-0001-5474-6789
Curtin: https://engsci.curtin.edu.my/departments/mechanical-engineering/staff/sujan-debnath/

Awards

High Impact Researcher award, by Curtin University, Malaysia (2023)
High Impact Researcher award, by Curtin University, Malaysia (2022)
Bronze award, InTex2023 Innovation Technology Expo, Kuching, Malaysia
Best Paper award, One Curtin Post Graduate Conference (OCPC 2018), Curtin Malaysia
Best Paper award, International Conference, DuraBI 2018
Best paper award, IACSIT 2014 International conference in Malaysia.
Best paper award at 9th CUTSE international conference, Curtin Malaysia
Best paper award at 5th ICMST international conference, Malaysia.
Bronze award, PECIPTA 2017, Malaysia
University Merit Scholarship, Bangladesh University of Engineering & Technology, Dhaka, Bangladesh.
Scholarship, Board of Intermediate and Secondary Education, Jessore, Bangladesh.

Teaching and learning certifications

Awarded Curtin Excellence and Innovation in Teaching Awards (2023)
Awarded Senior Fellow of HEA (2022) and Fellow (2020)
Completed Summative PREP in 2022
Professional Certificate in Pedagogy and Design Fundamentals: Pedagogy for Teaching and Learning: HEA Critical Reflection, 2021
Professional Certificate in Pedagogy and Design Fundamentals: Pedagogy for Teaching and Learning: The rationale behind the practice, 2020.
Professional Certificate in Pedagogy for Teaching and Learning: Constructive Alignment: Planning for teaching, 2020
Certified registered PREP Reviewer, Summative and Formative Review, LITEC (Learning Innovation & Teaching Excellence Centre), Curtin University, 2021.
Certificate on Foundations of Learning and Teaching (FOLT) Program, Curtin University, 2009.

Total publications and citation summary

Total Publications (Journal Papers + Book + Book chapters): 155 (Ref: Google Scholar)
Web of Science: Citations 4,157; h-index: 27 (Publons Researcher ID: Y-6667-2018)
SCOPUS: Citations 4,617; h-index: 28 (SCOPUS ID “Sujan, Debnath” 9737184700)
Google: Citations 6215; h-index: 33; i-10 index: 57

Research interests

Elastomer and Polymer recycling
Green Composite Materials using Bio-Waste
Nano Polymer Composite
Advanced/Sustainable/Nano-enhanced Machining
Thermal Management in Electronic Packaging
Origami-inspired Folding Technique and Folding Design

Publications

a. Books and book chapters

Books

Mubarak, N. M., Anwar, M., Debnath, S., & Sudin, I. (2023). Fundamentals of Biomaterials: A Supplementary Textbook. Springer Nature. (DOI: 10.1007/978-981-19-9300-8)
Sujan Debnath, (2011), “THERMAL MISMATCH STRESSES in Electronic Packaging”, LAP-LAMBERT Academic Publishing, GmbH & Co. KG, Germany, ISBN 978-3-8465-0505-2.

Book chapters

Anwar, M., Mubarak, N. M., Islam S., Debnath, S (2024). Biodegradation Behaviour of Bioactive Gallium Based Nanosilver Doped Alloy in Simulated Body Fluid: CRC Press, Taylor and Francis Group (accepted)
Kandasamy Prabhakar, Mahmood Anwar, and Sujan Debnath. Plastics in High Wear Resistance Application. Encyclopedia of Materials: Plastics and Polymers, Elsevier
Debnath, S., Anwar, M., Pramanik, A., & Basak, A. K. (2021). Nanofluid-minimum quantity lubrication system in machining: towards clean manufacturing. In Sustainable Manufacturing (pp. 109-135). Elsevier
Pramanik A., Basak A.K., Islam M.N., Dong Y., Debnath S., Vora J.J. (2020) Optimization of Accuracy and Surface Finish of Drilled Holes in 350 Mild Steel. In: Gupta K., Gupta M. (eds) Optimization of Manufacturing Processes. Springer Series in Advanced Manufacturing. Springer, Cham (online)
Debnath, S., Reddy, M. M., & Pramanik, A. (2019). Dry and Near-Dry Machining Techniques for Green Manufacturing. In Innovations in Manufacturing for Sustainability (pp. 1-27). Springer, Cham. (online)
Nabinejad, O., Sujan, D., (2016) “Natural fiber reinforced polymer composites”, Publisher: Wiley-VCH Veriag GmBH & Co. KGaA, of Boschstr, 12, 69469 Weinheim, Germany.

c. Journals/conferences

Wong, D., Fabito, G., Debnath, S., Anwar, M., & Davies, I. J. (2024). A critical review: Recent developments of natural fiber/rubber reinforced polymer composites. Cleaner Materials, 100261. [WoS, Q1]
Nair, H., Pramanik, A., Basak, A. K., Prakash, C., Debnath, S., Shankar, S., & Dixit, A. R. (2024). Experimental investigation on material removal rate, kerf width, surface roughness and the dimensional accuracy the accuracy of hole in Inconel 718 using wire electric discharge. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 238(3), 1017-1030. [WoS, Q3]
Jun, A. W. Q., Fong, A. L., Debnath, S., & Ali, M. Y. (2024). Recycled Household Plastic and Oil Palm Filler Reinforced Epoxy Composite for Lightweight Construction Applications. International Journal of Engineering Materials and Manufacture, 9(2), 52-59.
Suen, J. W., Elumalai, N. K., Debnath, S., Nabisab Mujawar, M., Lim, C. I., Reddy, M. M., & Khalid, M. (2023). Study of Capacitive Behavior and its Inter-Relationship with Electrolyte Solution Concentration in Hybrid Ionogels. ECS Journal of Solid State Science and Technology.
Hirudayanathan, H. P., Debnath, S., Anwar, M., Johar, M. B., & Elumalai, N. K. (2023). Influence of the Viscosity of Nanofluids on Surface Roughness in End Milling of Nickel Alloys with Minimum Quantity Lubrication. In MATEC Web of Conferences(Vol. 377, p. 01007). EDP Sciences. (SCOPUS indexed)
Gamage, L. E., Basak, A. K., Pramanik, A., Prakash, C., Shankar, S., Debnath, S., … & Ramakrishana, S. (2023). Recycling of Gold and Silver from Electronic Waste—A Review. Materials Circular Economy, 5(1), 8.
Debnath, S., Anwar, M., Basak, A. K., & Pramanik, A. (2023). Use of palm olein as cutting fluid during turning of mild steel. Australian Journal of Mechanical Engineering, 21(1), 192-202.
Hirudayanathan, H. P., Debnath, S., Anwar, M., Johar, M. B., Elumalai, N. K., & Mohammed Iqbal, U. (2023). A review on influence of nanoparticle parameters on viscosity of nanofluids and machining performance in minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231189668.
Suen, J. W., Elumalai, N. K., Debnath, S., Mubarak, N. M., Lim, C. I., Reddy Moola, M., … & Khalid, M. (2023). Investigating the Correlation between Electrolyte Concentration and Electrochemical Properties of Ionogels. Molecules, 28(13), 5192.
Suen, J. W., Elumalai, N. K., Debnath, S., Mubarak, N. M., Lim, C. I., Reddy Moola, M., … & Khalid, M. (2023). Investigating the Correlation between Electrolyte Concentration and Electrochemical Properties of Ionogels. Molecules, 28(13), 5192.
Suen, J. W., Elumalai, N. K., Debnath, S., Mubarak, N. M., & ing Lim, C. (2023). Structural Changes and Electrochemical Stability of Ionogel Incorporating Tetraethyl Orthosilicate and PVDF-HFP. In MATEC Web of Conferences(Vol. 377, p. 01006). EDP Sciences. (SCOPUS indexed)
Cui, X., Li, C., Zhang, Y., Ding, W., An, Q., Liu, B., … & Debnath, S. (2023). Comparative assessment of force, temperature, and wheel wear in sustainable grinding aerospace alloy using biolubricant. Frontiers of Mechanical Engineering, 18(1), 3. (WoS, Impact Factor: 4.797-Q2)
Duan, Z., Li, C., Zhang, Y., Yang, M., Gao, T., Liu, X., Debnath, S.,. & Sharma, S. (2023). Mechanical behavior and Semiempirical force model of aerospace aluminum alloy milling using nano biological lubricant. Frontiers of Mechanical Engineering, 18(3), 4. (WoS, Impact Factor: 4.797-Q2)
Suen, J. W., Elumalai, N. K., Debnath, S., Mubarak, N. M., Lim, C. I., & Reddy, M. M. (2022). The Role of Interfaces in Ionic Liquid‐Based Hybrid Materials (Ionogels) for Sensing and Energy Applications. Advanced Materials Interfaces, 9(34), 2201405. (WoS, Impact Factor: 6.197- Q2)
Chappell, B., Pramanik, A., Basak, A. K., Sarker, P. K., Prakash, C., Debnath, S., & Shankar, S. (2022). Processing household plastics for recycling–A review. Cleaner Materials, 100158 (SCOPUS indexed).
Gao, T., Li, C., Wang, Y., Liu, X., An, Q., Li, H. N., Debnath, S., … & Sharma, S. (2022). Carbon fiber reinforced polymer in drilling: From damage mechanisms to suppression. Composite Structures, 286, 115232. (WoS: 6.405- Q1).
Grindability of titanium alloy using cryogenic nanolubricant minimum quantity lubrication. Journal of Manufacturing Processes, 80, 273-286. (WoS, Impact Factor: 5.874- Q2).
Wang, X., Li, C., Zhang, Y., Said, Z., Debnath, S., Sharma, S., … & Gao, T. (2022). Influence of texture shape and arrangement on nanofluid minimum quantity lubrication turning. The International Journal of Advanced Manufacturing Technology, 119(1), 631-646. (WoS, Impact Factor: 3.471- Q2).
Nguyen, H. D., Pramanik, A., Basak, A. K., Dong, Y., Prakash, C., Debnath, S., … & Buddhi, D. (2022). A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties. journal of materials research and technology, 18(4641), e4661. (WoS, Impact Factor: 6.213- Q2).
Zhang, Z., Sui, M., Li, C., Zhou, Z., Liu, B., Chen, Y., Debnath, S.,… & Sharma, S. (2022). Residual stress of grinding cemented carbide using MoS2 nano-lubricant. The International Journal of Advanced Manufacturing Technology, 119(9), 5671-5685. (WoS, Impact Factor: 3.471- Q2).
Nair, H., Pramanik, A., Basak, A. K., Prakash, C., Debnath, S., Shankar, S., & Dixit, A. R. (2022). Experimental investigation on material removal rate, kerf width, surface roughness and the dimensional accuracy the accuracy of hole in Inconel 718 using wire electric discharge. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221096025. (WoS, Impact Factor: 1.761- Q3).
Wong, D., Anwar, M., Debnath, S., Hamid, A., Izman, S., Basak, A. K., & Pramani, A. (2022). Tensile Strength and Morphological Behavior of Treated Oil Pam Empty Fruit Bunch Particle Reinforced Polymeric Composite. In Materials Science Forum(Vol. 1064, pp. 27-37). Trans Tech Publications Ltd. (SCOPUS indexed).
Basak, A., Pramanik, A., Prakash, C., Shankar, S., & Debnath, S. (2022). Understanding the Micro-Mechanical Behaviour of Recast Layer Formed during WEDM of Titanium Alloy. Metals, 12(2), 188. (WoS, Impact Factor: 2.758- Q3).
Khieng, T. K., Debnath, S., Ting Chaw Liang, E., Anwar, M., Pramanik, A., & Basak, A. K. (2021). A Review on Mechanical Properties of Natural Fibre Reinforced Polymer Composites under Various Strain Rates. Journal of Composites Science, 5(5), 130 (WoS, Impact Factor: 0.63- Q2, JCI Category).
Wong, D., Anwar, M., Debnath, S., Hamid, A., & Izman, S. (2021). A Review: Recent Development of Natural Fiber-Reinforced Polymer Nanocomposites. JOM, Springer 1-12. (WoS, Factor: 2.62-Q3)
Wong, D., Anwar, M., Debnath, S., Abdullah, A. H., Izman, S., & Pramanik, A. (2021). Degassing Process Influence on Tensile Strength of Neat E132 Epoxy Polymeric Materials. In Materials Science Forum (Vol. 1026, pp. 129-135). Trans Tech Publications Ltd. (SCOPUS indexed).
Wang, X., Li, C., Zhang, Y., Said, Z., Debnath, S., Sharma, S., … & Gao, T. (2021). Influence of texture shape and arrangement on nanofluid minimum quantity lubrication turning. The International Journal of Advanced Manufacturing Technology, 1-16. (WoS, Factor: 3.226-Q2)
Khieng, T. K., Debnath, S., Anwar, M., Pramanik, A., & Basak, A. K. (2021). Single-Walled Carbon Nanotube-Enhanced Bagasse-Epoxy Hybrid Composites under Varied Low Tensile Strain Rates. Applied Mechanics, 2(4), 863-877. (SCOPUS indexed).
Basak, A. K., Hossain, M. R., Pramanik, A., Shah, D. R., Prakash, C., Shankar, S., & Debnath, S. (2021). Use of duck feather waste as a reinforcement medium in polymer composites. Cleaner Materials, 1, 100014. (SCOPUS Indexed).
Gao, T., Li, C., Yang, M., Zhang, Y., Jia, D., Ding, W., Debnath, S.,… & Wang, J. (2021). Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant. Journal of Materials Processing Technology, 290, 116976. (WoS: 4.799-Q1)
Prakash, C., Pramanik, A., Basak, A. K., Dong, Y., Debnath, S., Shankar, S., … & Zheng, H. Y. (2021). Investigating the Efficacy of Adhesive Tape for Drilling Carbon Fibre Reinforced Polymers. Materials, 14(7), 1699. (SCOPUS indexed).
Debnath, S., Anwar, M., Basak, A. K., & Pramanik, A. (2020). Use of palm Olein as cutting fluid during turning of mild steel. Australian Journal of Mechanical Engineering, 1-11. (WoS, Impact Factor: 0.36- Q3, JCI Category).
Gao, T., Li, C., Yang, M., Zhang, Y., Jia, D., Ding, W., Debnath, S., … & Wang, J. (2021). Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant. Journal of Materials Processing Technology, 290, 116976. (WoS, Impact Factor: 4.799-Q1)
Jin, S. Y., Pramanik, A., Basak, A. K., Prakash, C., Shankar, S., & Debnath, S. (2020). Burr formation and its treatments—a review. The International Journal of Advanced Manufacturing Technology, 1-22. (WoS, Impact Factor: 2.633-Q2)
Debnath, S., Ke Khieng, T., Anwar, M., Basak, A. K., & Pramanik, A. (2020). Strain Rate Sensitivity of Epoxy Composites Reinforced with Varied Sizes of Bagasse Particles. Journal of Composites Science, 4(3), 110. (WoS, Impact Factor: 0.43- Q2, JCI Category).
HUANG, B., Changhe, L. I., ZHANG, Y., Wenfeng, D. I. N. G., Min, Y. A. N. G., Yuying, Y. A. N. G., Debnath, S., … & JAMIL, M. (2020). Advances in fabrication of ceramic corundum abrasives based on sol–gel process. Chinese Journal of Aeronautics. (WoS, Impact Factor: 2.215-Q1)
An, A. W. T., Debnath, S., Chen, V. L. C., Reddy, M. M., & Pramanik, A. (2020). Degradation Behaviour of Nanosilica Enhanced Oil Palm Empty Fruit Bunch Fiber Epoxy Composites. In Solid State Phenomena (Vol. 305, pp. 28-35). Trans Tech Publications Ltd. (SCOPUS indexed).
Zie, F. W. W., Debnath, S., Anwar, M., & Abdullah, A. H. (2020). Enhancing Mechanical Performance of Bagasse Fiber-Epoxy Composite by Surface Treatment. In Solid State Phenomena (Vol. 305, pp. 8-17). Trans Tech Publications Ltd. (SCOPUS indexed).
Wang, X., Li, C., Zhang, Y., Ding, W., Yang, M., Gao, T., … & Debnath, S. (2020). Vegetable oil-based nanofluid minimum quantity lubrication turning: Academic review and perspectives. Journal of Manufacturing Processes, 59, 76-97. (WoS, Impact Factor: 4.086-Q2)
Nabinejad, O., Liew, W. Y., Debnath, S., Rahman, M. E., Cao, C., & Davies, I. J. (2019). Tribological behavior of unsaturated polyester hybrid composites containing wood flour and carbon nanotubes. SN Applied Sciences, 1(7), 777. (WoS, Impact Factor: 0.32- Q2, JCI Category).
Mohammad Asyraf, Mahmood Anwar, Sumaiya Islam, Sujan Debnath, Jerren Wong and S.Izman. (2019). Evolution of Electrical Behaviour Due to Nanosilver Concentration Influence on Nanosilver Doped Poly-Phenylene-Sulphide Polymer Conductor. JOM, Springer, 71 (10). (WoS, Impact Factor: 2.62-Q3)
Pramanik, A., Basak, A. K., Uddin, M. S., Shankar, S., Debnath, S., & Islam, M. N. (2019). Burr formation during drilling of mild steel at different machining conditions. Materials and Manufacturing Processes, 34(7), 726-735. (WoS, Impact Factor: 3.046-Q2)
Sarkar, B., Reddy, M. M., & Debnath, S. (2019, March). Experimental investigation of the influence of cutting parameters on surface roughness in machining Inconel 718. In Automatic Control, Mechatronics and Industrial Engineering: Proceedings of the International Conference on Automatic Control, Mechatronics and Industrial Engineering (ACMIE 2018), October 29-31, 2018, Suzhou, China (p. 239). CRC (WoS).
Abdullah, A. H., Bakar, A. A., Ismail, H., Kahar, A. W. M., & Debnath, S. (2019, April). The Effects of Accelerated Weathering on the Tensile Properties of Kenaf Reinforced Biocomposites. In IOP Conference Series: Materials Science and Engineering (Vol. 495, No. 1, p. 012110). IOP Publishing. (SCOPUS indexed).
Oo, T. T., A. H. Abdullah, M. Anwar, N. A. N. Khandoker, S. Islam, and Debnath. “Effect of Diluent on the Rheological and Mechanical Properties of Epoxy-Carbon Nanotubes Composite.” In IOP Conference Series: Materials Science and Engineering, vol. 495, no. 1, p. 012094. IOP Publishing, 2019. (SCOPUS Indexed).
Yong, S. J., Anwar, M., Islam, S., & Debnath, S. (2019, April). Thermal behaviour of nanosilver doped gallium flexible conductor for biomedical application. In IOP Conference Series: Materials Science and Engineering (Vol. 495, No. 1, p. 012083). IOP Publishing. (SCOPUS indexed).
Prabhakar, Sujan Debnath, Mahmood Anwar and K. Palanikumar (2019, April). Experimental Analysis on the Effect of Surface Treatment of Glass Fibers & Nanoclay on Mechanical Properties of Glass Fiber Reinforced Polymer Nanocomposites. In IOP Conference Series: Materials Science and Engineering (Vol. 495, No. 1, p. 012091). IOP Publishing. (SCOPUS indexed).
Shan, K. Y., Anwar, M., Islam, S., Debnath, S., & Mas-Ayu, H. (2019, April). Electrical behaviour of nanosilver doped gallium flexible conductor for biomedical application. In IOP Conference Series: Materials Science and Engineering (Vol. 495, No. 1, p. 012084). IOP Publishing. (SCOPUS indexed).
Kai, C. W., Abdullah, A. H., & Debnath, S. (2019, April). Mechanical Properties of Hybrid Polymer Composite Using Natural Fiber and Nanoparticle. In IOP Conference Series: Materials Science and Engineering (Vol. 495, No. 1, p. 012095). IOP Publishing. (SCOPUS indexed).
Nabinejad, O., Sujan, D., Rahman, M. E., Liew, W. Y. H., & Davies, I. J. (2018). Hybrid Composite Using Natural Filler and Multi-Walled Carbon Nanotubes (MWCNTs). Applied Composite Materials, 25(6), 1323-1337. (WoS, Impact Factor: 2.199-Q2)
Nabinejad, O., Sujan, D., Rahman, M. E., Liew, W. Y., & Davies, I. J. (2018). Mechanical and thermal characterization of polyester composite containing treated wood flour from Palm oil biomass. Polymer Composites, 39(4), 1200-1211. (WoS, Impact Factor: 2.265-Q2)
Fong, A. L., Khandoker, N. A. N., & Debnath, S. (2018, April). Development and characterization of sugarcane bagasse fiber and nano-silica reinforced epoxy hybrid composites. In IOP Conference Series: Materials Science and Engineering (Vol. 344, No. 1, p. 012029). IOP Publishing. (WoS).
Sujan, D., Vincent, L., & Pok, Y. W. (2018). Material Selection for Interfacial Bond Layer in Electronic Packaging. In MATEC Web of Conferences (Vol. 202, p. 01005). EDP Sciences. (SCOPUS indexed).
Prabhakar, K., Debnath, S., Ganesan, R., & Palanikumar, K. (2018, April). A review of mechanical and tribological behaviour of polymer composite materials. In IOP Conference Series: Materials Science and Engineering (Vol. 344, No. 1, p. 012015). IOP Publishing. (WoS).
Sujan, D., Vincent, L., & Pok, Y. W. (2018). Thermo-mechanical Interfacial Stress Analysis in Electronic Packaging at Different Temperature Conditions: Revisit Author’s Work. In MATEC Web of Conferences (Vol. 202, p. 01006). EDP Sciences. (SCOPUS indexed).
Sujan, D., Vincent, L., & Pok, Y. W. (2018). Bond Layer Properties and Geometry Effect on Interfacial Thermo-mechanical Stresses in Bi-material Electronic Packaging Assembly. In MATEC Web of Conferences (Vol. 202, p. 01004). EDP Sciences. (SCOPUS indexed).
Nabinejad, O. M. I. D., Debnath, S. U. J. A. N., Beh, J. K., & Ali, M. Y. (2018). Mechanical Performance and Moisture Absorption of Unidirectional Bamboo Fiber Polyester Composite. In Materials Science Forum (Vol. 911, pp. 88-94). Trans Tech Publications. (SCOPUS indexed).
Ali, M. Y., Maleque, M. A., Banu, A., Sabur, A., & Debnath, S. (2018). Micro Electro Discharge Machining of Non-Conductive Ceramic. In Materials Science Forum (Vol. 911, pp. 20-27). Trans Tech Publications. (SCOPUS indexed).
Hoe, C. H., M. M. Reddy, V. C. C. Lee, and Debnath. “Chatter Behaviour in the Milling Process of Inconel 718: Effects of Tool Edge Radius.” In MATEC Web of Conferences, vol. 202, p. 02006. EDP Sciences, 2018. (SCOPUS indexed).
Nabinejad, O., Sujan, D., Rahman, M. E., & Davies, I. J. (2017). Effect of filler load on the curing behavior and mechanical and thermal performance of wood flour filled thermoset composites. Journal of cleaner production, 164, 1145-1156. (WoS, Impact Factor: 7.246-Q1).
Oo, T. T., & Debnath, S. (2017, November). Application of carbon nanotubes in perovskite solar cells: A review. In AIP Conference Proceedings (Vol. 1902, No. 1, p. 020015). AIP Publishing. (WoS)
Chien, S. E. M., Reddy, M. M., Lee, V. C. C., & Sujan, D. (2017). The Study of Coated Carbide Ball End Milling Tools on Inconel 718 Using Numerical Simulation Analysis to Attain Cutting Force and Temperature Predictive Models at the Cutting Zone. In Materials Science Forum (Vol. 882, pp. 28-35). Trans Tech Publications. (SCOPUS indexed)
Nabinejad, O., Debnath, S., Ying, T. J., Liew, W. Y., & Davies, I. J. (2017). Influence of alkali treatment and nanoclay content on the properties of rice husk filled polyester composites. In Materials Science Forum (Vol. 882, pp. 89-100). Trans Tech Publications. (SCOPUS indexed).
Islam, S., Khandoker, N., Izham, M., Azizi, T., & Debnath, S. (2017). Development of a low cost MQL setup for turning operations. In MATEC Web of Conferences (Vol. 95). (WoS).
Sarkar, B., Reddy, M. M., & Debnath, S. (2017). Effect of machining parameters on surface finish of Inconel 718 in end milling. In MATEC Web of Conferences (Vol. 95, p. 02009). EDP Sciences. (WoS).
Pok, Y. W., Sujan, D., Rahman, M. E., & Dol, S. S. (2017). Effect of Bond Layer Properties to Thermo-Mechanical Stresses in Flip Chip Packaging. In MATEC Web of Conferences (Vol. 95, p. 01003). EDP Sciences. (WoS)
Nabinejad, O., Debnath, S., & Mohsen Taheri, M. (2017). Oil Palm Fiber Vinyl Ester Composite; Effect of Bleaching Treatment. In Materials Science Forum (Vol. 882, pp. 43-50). Trans Tech Publications. (SCOPUS indexed)
Sujan Debnath (2017) “Editorial Preface” Materials science forum. , 2017, Vol.882; Identifier: ISSN: 0255-5476, 1662-9752; ISBN: 9783038357322 (SCOPUS indexed)
Debnath, S., & Abdullah, A. H. (2017). Mechanical Performance of Cockle Shell Particles (CSP) and Oil Palm Fibre (OPF) Reinforced Epoxy Composite. International Journal of Engineering Materials and Manufacture, 2(3), 58-66. (Non-indexed).
Debnath, S., Reddy, M. M., & Yi, Q. S. (2016). Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in the turning process using Taguchi method. Measurement, 78, 111-119. (WoS, Impact Factor: 3.364-Q1)
Nabinejad, O., Sujan, D., Rahman, M. E., & Davies, I. J. (2015). Determination of filler content for natural filler polymer composite by thermogravimetric analysis. Journal of Thermal Analysis and Calorimetry, 122(1), 227-233. (WoS, Impact Factor: 2.731-Q2)
Nabinejad, O., Sujan, D., Rahman, M. E., & Davies, I. J. (2015). Effect of oil palm shell powder on the mechanical performance and thermal stability of polyester composites. Materials & Design (1980-2015), 65, 823-830. (WoS, Impact Factor: 6.289-Q1)
M. Reddy, A. Gorin, K.A. Abou-El-Hossein, D. Sujan (2015) “Modeling of Temperature Distribution when Machining Inconel 718 in Turning process” Power Electronics and Energy Engineering (ISI indexed) (WoS).
Rong Kimberly, F., Oo, Z., & Debnath, S. (2015). Microstructure analysis, physical and thermal properties of Al2O3-Al2TiO5 functionally graded ceramics for the application of car brake rot. Pertanika Journal of Science and Technology, 23(1), 153-161. (WoS).
Jeevanandam, J., K Danquah, M., Debnath, S., S Meka, V., & S Chan, Y. (2015). Opportunities for nano-formulations in type 2 diabetes mellitus treatments. Current pharmaceutical biotechnology, 16(10), 853-870. (WoS, Impact Factor: 2.097-Q3)
Debnath, S., Reddy, M. M., & Yi, Q. S. (2014). Environmental friendly cutting fluids and cooling techniques in machining: a review. Journal of cleaner production, 83, 33-47. (WoS, Impact Factor: 7.246-Q1)
Nabinejad, O., Sujan, D., Rahman, M. E., Reddy, M. M., Liew, W. Y., & Davies, I. J. (2014). The effect of alkali treatment of OPKS filler on mechanical property of polyester-composite. In Advanced Materials Research (Vol. 980, pp. 86-90). Trans Tech Publications. (SCOPUS indexed).
Samuel, N., Sujan, D., Rahman, M. E., Nabinejad, O., & Reddy, M. M. (2014). Oil Palm Fibre and Nano-Silica Reinforced Epoxy Composite Material. In Advanced Materials Research (Vol. 980, pp. 23-27). Trans Tech Publications. (SCOPUS indexed).
Rahman, M. E., Muntohar, A. S., Pakrashi, V., Nagaratnam, B. H., & Sujan, D. (2014). Self compacting concrete from uncontrolled burning of rice husk and blended fine aggregate. Materials & Design, 55, 410-415. (WoS, Impact Factor: 6.289-Q1)
E Woldemichael, J. J. Lai, D. Sujan (2014) “Topology optimization of beam structures with various end loading conditions”, Applied Mechanics and Materials, Vol. 465-466, pp 22-26 DOI: 10.4028/www.scientific.net/ AMM.465-466.22 (WoS)
Sujan, D., Nguong, C. W., Lee, S. N. B., & G Zewge, M. (2014). Wear Properties of Oil Palm Cellulose Fibre Reinforced Polymer Composites. In Advanced Materials Research (Vol. 845, pp. 81-85). Trans Tech Publications. (WoS).
G Zewge, M., Lemma, T. A., Ibrahim, A. A., & Sujan, D. (2014). Modeling and Simulation of a Heat Recovery Steam Generator using Partially Known Design Point Data. In Advanced Materials Research (Vol. 845, pp. 596-603). Trans Tech Publications. (WoS).
Sujan, D., Piaw, T. K., & Woldemichael, D. E. (2014). Thermo-Mechanical Stress Analysis in Electronic Packaging with Continuous and Partial Bond Layer. In Applied Mechanics and Materials (Vol. 465, pp. 50-54). Trans Tech Publications. (WoS).
Debnath, S., Pang, X., Rahman, E., & Moola, M. R. (2012). Performance study of solder bond on thermal mismatch stresses in electronic packaging assembly. In 15th International Conference on Advances in Materials & Processing Technologies Conference 2012 (AMPT 2012). AMPT2012. (WoS).
Reddy, M. M., Gorin, A., Khaled, A. E. H. A., & Sujan, D. (2014). Machinability of Aluminum Nitride Ceramic Using TiAlN and TiN Coated Carbide Tool Insert. In Materials Science Forum (Vol. 773, pp. 437-447). Trans Tech Publications. (WoS).
Loh, Y. R., Sujan, D., Rahman, M. E., & Das, C. A. (2013). Sugarcane bagasse—The future composite material: A literature review. Resources, Conservation & Recycling, 75, 14-22. (WoS, Impact Factor: 6.289-Q1)
Moola, M. R., Debnath, S., Gorin, A., & KA, A. E. H. (2013). Surface Roughness Model when Machining Aluminum Nitride Ceramic With Two Flute Square end MicroGrain Solid Carbide end Advanced Materials Research, 747, 282-286. (WoS)
Sujan, K. P. Ting (2013) “Closed form bi-layered interfacial thermal stress model in electronic packaging” International journal of Advanced Materials Manufacturing and Characterization (IJAMMC) (Non-Indexed)
Debnath, S., Oo, Z., Rahman, M., Maleque, M., & Tan, C. (2012). Physio-mechanical properties of aluminium metal matrix composites reinforced with Al2O3 and SiC. International Journal of Engineering and Applied Sciences, 6, 288-291. (Non-Indexed)
Sujan, D., Yeo, C. W., Rahman, M. E., Reddy, M. M., Maleque, M. A., & Ali, M. Y. (2012). Aluminum-Silicon Carbide Composites for Enhanced Physio-Mechanical Properties. In Advanced Materials Research (Vol. 576, pp. 370-373). Trans Tech Publications. (SCOPUS indexed)
Fu, P., Gorin, A., Debnath, S., & Oo, Z. (2012). On the problem of novel composite materials development for car brake rotors. International Journal of Engineering and Physical Sciences (WASET), 6, 333-336. (Non-Indexed).
Arifutzzaman, A., Maleque, M. A., & Sujan, D. (2012). The Crystallinity and Hardness Properties of Al-Cu/SiCp New Composite Materials. In Advanced Materials Research (Vol. 576, pp. 450-453). Trans Tech Publications. (SCOPUS indexed).
Reddy, M. M., Gorin, A., Abou-El-Hossein, K. A., Sujan, D., Ali, M. Y., & Maleque, M. A. (2012). Tool Wear Analysis in End Milling of Advanced Ceramics with TiAlN and TiN Coated Carbide Inserts. In Advanced Materials Research (Vol. 576, pp. 76-79). Trans Tech Publications. (SCOPUS indexed)
Debnath, S., Rahman, M. E., Engida, W. D., Murthy, M. V. V., & Seetharamu, K. N. (2011). Bi-layered model of interfacial thermal stresses with the effect of different temperatures in the layers. In Applied Mechanics and Materials (Vol. 87, pp. 63-70). Trans Tech Publications. Bi-layered model of interfacial thermal stresses with the effect of different temperatures in the layers. (WoS).
Sujan, D., Woldemichael, D. E., Murthy, M. V. V., & Seetharamu, K. N. (2011). Effect of bond layer on BiMaterial Assembly subjected to Uniform Temperature Change. Journal of Electronic Packaging, 133(4), 041014. (WoS, Impact Factor: 1.787-Q3)
Woldemichael, D., Hashim, F., & Debnath, S. (2011). A Knowledge-Based Conceptual Design Support System. Advanced Materials Research, 308, 1540-1545. (WoS)
Sujan, D., Murthy, M. V. V., & Seetharamu, K. N. (2011). Improved tri-layered interfacial stress model with the effect of different temperatures in the layers. Archive of Applied Mechanics, 81(5), 561-568. (WoS, Impact Factor: 1.374-Q3)
Debnath, S., Oo, Z., Murthy, M. V. V., & Seetharamu, K. N. (2010). Effect of Different Uniform Temperature with Thickness-Wise Linear Temperature Gradient on Interfacial Stresses of a Bi-Material Assembly. American Journal of Applied Science, 7(6), 829-834. (Non-Indexed).
Sujan, D., Murthy, M. V. V., Hassan, A. Y., & Seetharamu, K. N. (2008). An improved closed-form solution for shearing and peeling stresses of trimaterial assembly in electronic packaging. Journal of Microelectronics and Electronic Packaging, 5(1), 36-42. (WoS).
Sujan, D., Murthy, M. V. V., Seetharamu, K. N., & Hassan, A. Y. (2005). Interfacial stresses in a tri-material assembly subjected to differential temperatures in the layers in electronic packaging. Journal of microelectronics and electronic packaging, 2(3), 162-170. (WoS).
Sujan, D., Murthy, M. V. V., Seetharamu, K. N., & Hassan, A. Y. (2005). Engineering model for interfacial stresses of a heated bimaterial structure with bond material used in electronic packages. Journal of microelectronics and electronic packaging, 2(2), 132-141. (WoS).
Sujan, D., Sridhar, T. S., Seetharamu, K. N., Murthy, M. V. V., & Hassan, A. Y. (2006, December). An Accurate Solution for Thermo-mechanical Stresses in Tri-Material Assembly in Electronic Packages. In Electronic Materials and Packaging, 2006. EMAP 2006. International Conference on (pp. 1-8). IEEE. (WoS).
Sujan, D., Murthy, M. V. V., Seetharamu, K. N., & Hassan, A. Y. (2005, April). Complete model for interfacial stresses of a two layered structure. In Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, 2005. EuroSimE 2005. Proceedings of the 6th International Conference on (pp. 454-461). IEEE. (WoS).
Sujan, D., Murthy, M. V. V., Seetharamu, K. N., & Hassan, A. Y. (2004, December). Engineering model for interfacial stresses of a tri-material assembly with different temperatures in the layers. In Electronics Packaging Technology Conference, 2004. EPTC 2004. Proceedings of 6th (pp. 526-533). IEEE. (WoS).

IP submission (Patent filed with MYIPO)

PI2023003136 (ENHANCED IONOGEL SPECIFIC CAPACITANCE WITH TREATED SELULOSE), 2023
PI2023007342 (PREPARATION OF PALM OIL-BASED ALUMINUM OXIDE (Al2O3) NANOFLUID), 2023
Filled 2 copyrights in 2023 & one in 2024

Keynote/invited presentations

Keynote speech

Global Conference on Polymer Science and Engineering November 15, 2021, India
2nd International conference, ICMTE2019, Curtin University Malaysia.
10th International Conference, ICMST2019, Malaysia.
9th International Conference, ICMST2018), Malaysia.
International Conference, AAME2018, Malaysia.
8th International Conference, ICMST2017, Hong Kong.
International Conference, ICMST2016, Malaysia.
6th International conference, ICMST2015, Brunei.
International Conference, ICMPC2014, India.

Invited speech

POMtec2023 Conference and Exhibition
International Conference, POLYMERS-ECON2022, India.
International Conference, EMSEE2022, Malaysia.
Chief Guest & Technical Speech online Faculty Development Programme at SRM Institute of Technology, India.
Online Faculty Development Programme at Indian Institute of Information Technology Bhagalpur, India.
Invited speaker and resource person at AICTE Margadarshan Online FDP on Outcome Based Education and Research Methodologies, 2020, India
International Online Conference, ICRM-2020, India.
International Conference, IJAMMC2013, India.

Research grants and consultancy projects

Thermoset Matrix Influence on Dispersion Behavior Towards Impact Performance of Water Hyacinth–Waste Rubber Hybrid Composites. Project Leader, Fundamental Research Grant Scheme (FRGS), Ministry of Higher Education, Malaysia, 2024-2027. [RM126,800]
Mechanical Performance of Waste Rubber and Water Hyacinth Fiber Reinforced Hybrid Polymer Composite. Project Leader, Curtin Malaysia Collaborative Research Scheme (CMCR) 2023 [20,000].
Nano-Cockle Shell Biofiller Effects on Weathering Resistance Behavior of Epoxy Bio-Composites in Seawater Marine Application. Key Investigator, Key Investigator, Curtin Malaysia Research Institute Collaborative Research Scheme (CMRI-CRS) 2022 [RM36,650].
Synergistic Effect of Nanocellulose Incorporation on Coulombic Interaction and Energy Dissipation in the Green Conductive Stretchable Composite based on Ionogel and Palm waste. Project Leader, Fundamental Research Grant Scheme (FRGS), Ministry of Higher Education, Malaysia, 2021-2022. [RM92,237]
Matrix Density Influence on Dispersion Behaviour of Oil Palm Filler Reinforced Epoxy Green Nanocomposite. Key Investigator, Fundamental Research Grant Scheme (FRGS), Ministry of Higher Education, Malaysia, 2020-2021. [RM103,200]
Enhancing Future Employability Skills Through Innovative Teaching Delivery in Manufacturing Processes Course Incorporating Library Facility. Key Investigator, Curtin Malaysia Teaching Innovation Project (CMTIP)
Impact of palm oil based minimum quantity of lubrication on machinability of Ti and its alloy (Ti-6Al-4V). Key Investigator, Fundamental Research Grant Scheme (FRGS), Ministry of Higher Education, Malaysia, 2019-2020. [RM70,000]
A mathematical model of a circular force transducer with uniform stress distribution. Key Investigator, Fundamental Research Grant Scheme (FRGS), Ministry of Higher Education, Malaysia, 2017-2018. [RM59,400].
Enhancing Machinability of Nickel Super Alloys using Advanced Tools in End Milling Operation. Key Investigator, Fundamental Research Grant Scheme (FRGS), Ministry of Higher Education, Malaysia, 2015-2016. [RM113,400]
Performance of green composite material incorporating of cockle-shells and polypropylene fiber. Key Investigator, Curtin Sarawak Research Fund (CSRF), 2014 [RM10,000]
Analytical and Numerical Approaches for Sustainable Bond Material Selection in Electronic Packaging Industry. Project Leader, Fundamental Research Grant Scheme (FRGS), Ministry of Higher Education, Malaysia, 2014-2015. [RM43,000]
Development of Novel Hybrid Polymer Bio-composite materials using Sugarcane Bagasse, Rice Husk Ash, Nano-silica and C-S-H gel in Epoxy matrix. Project Leader, Curtin Sarawak Collaborative Research Fund (CSCR), 2013-2014 [RM50,000].
Mechanical and wear Properties of nano-SiC filled natural cellulose reinforced epoxy based eco-composites. Project Leader, Curtin Sarawak Cluster Research Fund (CSCRF), 2012 [RM8000]
Surface roughness measurement of turned parts using machine vision. Key Investigator, Curtin Sarawak Research Fund (CSRF), 2011, [RM10,000].
Innovation design and fabrication of car gear rotor by using Al2TiO5 –based functional graded materials. Key Investigator, Curtin Sarawak Collaborative Research, (CSCR), 2011 [RM50,000].
A study on normal strength self-compacting concrete (SCC) using Rice Husk Ash (RHA). Key Investigator, Curtin Sarawak Research Fund (CSRF), 2011 [RM10,000].
Numerical and Experimental Analysis of Parabolic Trough Collector for Steam Generation. Curtin Sarawak Research Fund (CSRF), 2010 [RM10,000]
Alternative material for car gear rotor using Aluminium based metal matrix composites. Project Leader, Curtin Sarawak Research Fund (CSRF), 2010, [RM10,000].
Simulation and Actual Fabrication of SiC Reinforced Al-MMC Automatic Disc/Brake Rotor. Project Leader, Research Design & Development and Innovation Grant, Multimedia University, 2006 [RM23,000].

HDR supervision

PhD

Abdul Hamid Bin Abdullah, Preparation and Characterization of Water Hyacinth Reinforced Epoxy Bio-composites for Structural Application (2024)
Hwan Liang Dominick Wong, Impact Strength Analysis of Natural Fiber Reinforced Polymer Hybrid Composite Based on Waste Rubber Incorporating Techno-Economic Assessment (Approaching Milestone 1)
Hiru Purushothaman Hirudayanathan, Vegetable Nanofluid Based MQL Influence on End Milling Machinability of Nickel Alloy. (Under External Review)
Ai Ling Fong, Compressive Strength Enhancement of Hybrid Natural Fibre Reinforced Polymer Composite for Infrastructure Applications (Approaching Milestone 2)
Dr. Kandasamy Prabhakar, Experimental Determination of Mechanical and Wear Performance of Glass Fiber reinforced Polymer Nanocomposites. (Completed)
Dr. Omid Nabinejad, Mechanical Performance and Thermal Stability of Natural Fiber Composite Using Palm Oil Biomass. (Completed)
Bapi Sarkar, Experimental investigation on machinability of inconel 718 for optimum tool wears

MPhil

Suen Ji Wei, Incorporation of nanocellulose for enhanced electro-mechanical properties in novel ionogel composite (Completed)
Wong Hwan Liang Dominick, Matrix Characteristics Influence on Mechanical Performance of Oil Palm Filler Reinforced Nanocomposite (Completed)
Tan Ke Khieng, Low Range Strain Rates Behaviour of SWCNT Enhanced Bagasse-Epoxy Polymer Composites for Dynamic Loading Application (Completed)
Hoe Chen Hou, The influence of tool vibration on machinability of Inconel 718 in end milling (Completed)
Ai Ling Fong, On Potential of Natural and Artificial Particulate Mixtures as Reinforcements in Hybrid Bio-Composites (Completed)
Nor Hashimah Mohamad Zain, Utilization of Agro-Industrial Waste in Aluminium Metal Matrix Composite Material (Completed)
Mohammad Asyraf bin Mohammad Hatta, Nanosilver-Doped Polymer Conductor for High-Voltage Application (Completed)

Professional experience

Professor (2024, January onward), of Mechanical Engineering, Faculty of Engineering and Science, Curtin University, Malaysia.
Associate Professor (2013-2023), of Mechanical Engineering, Faculty of Engineering and Science, Curtin University, Malaysia.
Head, Mechanical Engineering (2014- 2017), Department of Mechanical Engineering, Faculty of Engineering and Science, Curtin University, Malaysia.
Senior Lecturer (2008-2013), Department of Mechanical Engineering, Faculty of Engineering and Science, Curtin University, Malaysia.
Lecturer (2006-2008), Faculty of Engineering & Technology (FET), MMU, Malaysia.
Lecturer (1999-2006), Project Coordinator, Course Leader, Mechanical Engineering, Linton College Malaysia (The Nottingham Trent University, UK).

Professional activities

Guest Editor, a special issue on “Greening Industrial Solid Waste” which will be published by MDPI.
Section Editor, International Journal of Engineering Materials and Manufacture (IJEMM)
Editor, Manufacturing Sciences & Technologies VII by Trans Tech Publications
Editor, Manufacturing Sciences & Technologies VII by Trans Tech Publications
Editor, Manufacturing Sciences & Technologies IX by Trans Tech Publications
Editor, Manufacturing Sciences & Technologies X by Trans Tech Publications
Member of the Accreditation Committee (2023)
Member of the Material and Structure Research Cluster (2013-2023)
Member of the Board of Studies (BOSS) (2021-2023)
Member of the Industrial and External Relation (IERC) Committee (2019-2023)
Member of the Faculty Accreditation & Staff Professional Development Working Group
Open day Coordinator, Mechanical Engineering (2009):
Member, Students and Alumni Relations Committee (2010-2011, 2018-2020)

Professional associations

Chartered Professional Engineer (the Institute of Mechanical Engineering, UK) (CEng MIMechE)
Senior Fellow, HEA (Higher Education Academy, UK)
Fellow, IMM (Institute of Materials, Malaysia)

Law Ming Chiat

PhD, BEng (Hons), MIMechE, CEng
Associate Professor, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 364
Tel: +60 85 630100 Ext:2479
Email: m.c.law@curtin.edu.my

Research profiles

Scopus Profile: https://www-scopus-com.dbgw.lis.curtin.edu.au/authid/detail.uri?authorId=57195150775
ORCID Profile: https://orcid.org/0000-0001-6460-1671
Google Scholar Profile: https://scholar.google.com/citations?user=YnL5VUcAAAAJ&hl=en
ResearchGate Profile: https://www.researchgate.net/profile/Ming_Chiat_Law

Research interests

Microwave heating, ultrasound, heat transfer, fluid flow, multi-scale, multi-physics modeling, micromechanics, nanoparticles

Journal publications

2004

Law, M.C., Clarke, A. and Garner, C.P., ”The Effects of Soot Properties on the Regeneration Behaviour of Wall-Flow Diesel Particulate Filters”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 218(12), 2004, pp 1513-1524, ISSN 0954-4070

2005

Law, M.C., Clarke, A. and Garner, C.P., ”A Diesel Particulate Filter Regeneration Model with a Multi-Step Chemical Reaction Scheme”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219(2), 2005, pp 215-226, ISSN 0954-4070

2008

Law, M.C., Clarke, A., Garner, C.P. and A M Williams, “A Finite-Volume-based two-dimensional wall-flow Diesel Particulate Filter Regeneration Model”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222(5), 2008, pp 829 – 857, ISSN 0954-4070

2013

Hii C.L., Law C.L., Law M.C., “Simulation of Heat and Mass Transfer of Cocoa Beans under Stepwise Drying Conditions in a Heat Pump Dryer”, Applied Thermal Engineering, 54(1), pp 264 – 271, 2013

2014

Tay C.L. and Law, M.C. “ Numerical Modeling of MCFC: Effects of gas flow direction in anode and cathode” PERTANIKA Journal of Science and Technology, 22(2), 2014.

2015

J.S. Lim, S.F. Wong, M.C. Law, Y. Samyudia, S.S. Dol, “A review on the effects of emulsions on flow behaviors and common factors affecting the stability of emulsions”, Journal of Applied Sciences, 15(2), 167-172, 2015
Law M.C., Lee V.C.-C, Tay C.L., “Dynamic behaviors of a molten carbonate fuel cell under a sudden shut-down scenario: Effects on temperature gradients”,Applied Thermal Engineering, 82, pp 98-109, 2015
M.C. Law, G. V. Y. Liang, V.C.C. Lee, S.K. Wee, “Temperature and voltage responses of a molten carbonate fuel cell in the presence of a hydrogen fuel leakage”, IOP Conf. series: Material Science and Engineering, 78, 2015
Jessie S.L. Chang, Ming C. Law, Yen S. Chan, Cho P. Leo, “Effects of Microwave Heating on Oil Palm Mesocarp”, Chemical Engineering Transactions, 45, 2015 DOI: http://doi.org/10.3303/CET1545273
Siew Fan Wong, Ming Chiat Law, Yudi Samyudia, Sharul Sham Dol, “Rheology study of Water-in-Crude Oil Emulsions”, Chemical Engineering Transactions, 45, 2015, DOI: http://doi.org/10.3303/CET1545236

2016

W.T. Liew, M.C. Law, “Simulation of a bioreactor with improved fermentation kinetic – fluid flow model”, PERTANIKA Journal of Science and Technology, 24(1), pp 137- 163, 2016
Lee V.C.-C, M.C. Law, S.K. Wee, “Theory to Practice on computer-aided Engineering Tools”, Australasian Journal of Engineering Education, 20(2), 2015, DOI: 10.1080/22054952.2015.1116175
M.C. Law, E.L. Liew, Y.S. Chan, C.P. Leo, “Modelling microwave heating of discrete samples of oil palm kernels”, Applied Thermal Engineering, 98, pp 702-726, 2016
S.K. Wee, Y.W. Pok, M.C. Law, V.C.C. Lee, “The study of solid circulation rate in a compartmented fluidised bed gasifier (CFBG)”, IOP Conference Series: Earth and Environmental Science, 36, pp 12036, 2016.
V.C.C. Lee, Chang Hong Chai, Ming Chiat Law, S.K. Wee, “Experimental Analysis of Impedance-Driven Reverse Flow Dynamics”, Applied Mechanics and Materials, 819, pp305-308, 2016.

2017

Lee V.C.-C., Chai, C.H., Law, M.C., Wee, S.K., “On the analysis of impedance-driven reverse flow dynamics”, Journal of Engineering Science and Technology, 12(2), pp451,459, 2017
Jessie S.L. Chang, Y.S. Chan, M.C. Law, C.P. Leo, “Comparative microstructure study oil palm fruit bunch fibre, mesocarp and kernel after microwave pre-treatment”, International Conference on Materials Technology and Energy, Miri, Sarawak, Malaysia, 2017, IOP Conf. series: Material Science and Engineering
S.P. Yeong, M.C. Law, V.C.C. Lee, Y.S. Chan, “Modelling batch microwave heating of water”, International Conference on Materials Technology and Energy, Miri, Sarawak, Malaysia, 2017, IOP Conf. series: Material Science and Engineering

2018

Van Hong Leong, Hisham Ben Mahmud, Ming Chiat Law, Henry Chee Yew Foo, Inn Shi Tan, “A comparison and assessment of the modelling and simulation of the sandstone matrix acidizing process: A critical methodology study”, Journal of Natural Gas Science and Engineering, 57, pp 52-67, 2018
Leong, V.H., Ben Mahmud, H., Law, M.C. et al. “A numerical modelling and simulation of core-scale sandstone acidizing process: a study on the effect of temperature”, Journal of Petroleum Exploration and Production Technology (2018). https://doi.org/10.1007/s13202-018-0522-8

2019

S.P. Yeong, M.C. Law, K.Y. You, Y.S. Chan, V.C.C. Lee, “A coupled electromagnetic-thermal-fluid-kinetic model for microwave-assisted production of Palm Fatty Acid Distillate biodiesel”, Applied Energy, 237, pp. 457- 475, 2019
G.L. Lee, M.C. Law, V.C.-C. Lee, “Modelling of liquid heating subject to simultaneous microwave and ultrasound irradiation”, Applied Thermal Engineering, 150, pp. 1126 – 1140, 2019
G.L. Lee, M.C. Law, V.C.-C. Lee, “Model Development and Simulation of Nucleate Pool Boiling in OpenFOAM: Boiling Physics in Bulk Liquid and Roles of Freeboard Region”, 140, pp.255-279, 2019
V.H. Leong, H.B. Mahmud, M.C. Law, CYH Foo, IS Tan, “An optimization framework for sandstone acidizing using design of experiment (DOE) and mathematical modelling, IOP Conference series: material science and engineering, 495(1), 012066
M.C. Law, J.S.L. Chang, Y.S. Chan, D.Y. Pui, K.Y. You, “Experimental characterization and modeling microwave heating of oil palm kernel, mesocarp and empty fruit bunches”, Drying Technology, 37(1), 69-91, 2019
P.N. Y. Yek, M.S. Osman, S.H. Kong, M.C. Law, R.K. Liew, S.S. Lam, “Numerical simulation and experimental validation of microwave torrefaction for empty fruit bunches pellet”, e-Bangi, 16(3), 2019

2020 – 2021

GL Lee, MC Law, VC-C Lee, “Numerical modelling of liquid heating and boiling phenomena under microwave irradiation using OpenFOAM”, International Journal of Heat and Mass Transfer, 148, 119096, 2020
Ting Yen Chong, Ming Chiat Law, Yen San Chan, “The Potentials of Corn Waste Lignocellulosic Fibre as an Improved Reinforced Bioplastic Composites”, Journal of Polymers and the Environment, 2020
Jeevanandam, J., Chan, Y.S., Danquah, M.K., Law, M.C., “Cytotoxicity Analysis of Morphologically Different Sol-Gel-Synthesized MgO Nanoparticles and Their In Vitro Insulin Resistance Reversal Ability in Adipose cells.” Appl Biochem Biotechnol 190, 1385–1410 (2020)

2021

GL Lee, MC Law, VC-C Lee, “Numerical modelling and investigation of microwave heating and boiling phenomena in binary liquid mixture using OpenFOAM”, International Journal of Thermal Sciences, 159, 106538, 2021

Conference publications

K.W.H. Kelvin, M.C. Law, F.E. Tang, “CFD Approach for Modelling Pollutant Dispersion Around the Coastal Headland”, 7th Curtin University Technology, Science and Engineering (CUTSE 2010) Conference, Miri, Sarawak, Malaysia, 2010.
TCH Ting, HH Lau, M.C. Law, “Compression tests on cold formed steel lipped C-Channel columns-short column”, Proccedings of Conference on Building and Infrastructural Technology, 306-311, 2010.
Nadzim Al-Rash bin Putit, M.C. Law, “Steady-state modelling of a solid oxide fuel cell”, 6th Curtin University Technology, Science and Engineering (CUTSE 2011) Conference, Miri, Sarawak, Malaysia, 2011.
Joyceanne Hong Jia Ming, M.C. Law, “Dynamic modelling of a solid oxide fuel cell”, 6th Curtin University Technology, Science and Engineering (CUTSE 2011) Conference, Miri, Sarawak, Malaysia, 2011.
S.H. Lee, M.C. Law, “Modeling pollutant dispersion around the coastal headland using COMSOL Multiphysics”, 7th Curtin University Technology, Science and Engineering (CUTSE2012) Conference, Miri, Sarawak, Malaysia, 2012.
C.K. Low, M.C. Law, “CFD modeling of vortex-induced vibration (VIV) for flow past 2-dimensional objects”, 7th Curtin University Technology, Science and Engineering (CUTSE2012) Conference, Miri, Sarawak, Malaysia, 2012.
S.Z. Lai, M.C. Law, “Development of computational fluid dynamics codes: Higher Order Scheme”, 7th Curtin University Technology, Science and Engineering (CUTSE2012) Conference, Miri, Sarawak, Malaysia, 2012.
Tay C.L. and Law, M.C. “Numerical Modeling of MCFC”, 26th Symposium of Malaysian Chemical Engineers (SOMChE 2012) In Conjunction With 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE 2012), Kota Kinabalu, Sabah, Malaysia, 2012.
Liew E.W.T. and Law M.C., “Preliminary CFD simulation of mixing in bioreactor agitated by Rushton turbine”, 26th Symposium of Malaysian Chemical Engineers (SOMChE-2012) in conjunction with 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012), Kota Kinabalu, Sabah, Malaysia, 2012
Chan, Y.S. and Law, M.C., “A short review on the implementation of open-ended laboratory towards innovative and creative thinking in engineering education”, 3rd International Conference on Higher Education Teaching & Learning, Miri, Sarawak, Malaysia, 2015
M.C. Law, J. Chang, “Modelling microwave heating of an oil palm mesocarp”, XI International Conference on Computational heat, mass and momentum transfer, May 21 – 24, 2018, Cracow, Poland

Research grants and consultancy projects

Position: Chief-investigator
Project title: Fuel cell modelling
Status: Completed (2011–2013)
Funding source: Sarawak Energy Berhad (RM 27,200)
Position: Co-investigator
Project title: Experimental investigation of micro-emulsion formation and evolution in pipeline flow
Status: Completed
Funding source: Exploratory Research Grant Scheme, Ministry of Higher Education, Malaysia (RM 100,000)
Position: Chief-investigator
Project title: Development, numerical modelling and experimental verification of a microwave-heated and cavitation-induced distillation vessel to improve the cold flow properties of palm oil biodiesel
Status: Completed (2015–2018)
Funding source: Fundamental Research Grant Scheme, Ministry of Higher Education, Malaysia (RM 122,000)
Position: Chief-investigator
Project title: Characterization and modelling of oil palm fruits and bunches subjected to microwave heating
Status: Completed (2015–2017)
Funding source: Fundamental Research Grant Scheme, Ministry of Higher Education, Malaysia (RM 94,000)
Position: Chief investigator
Project title: Modelling of crude oil solidification in pipeline flow
Status: Completed (2015–2016)
Funding source: Universiti Teknologi PETRONAS (RM 5,000)
Position: Co-investigator
Project title: Modelling and design of a rotary vane expander for oil palm wastes-fired organic Rankine cycle power plants
Status: On-going (2016–2018)
Funding source: Fundamental Research Grant Scheme, Ministry of Higher Education, Malaysia (RM 80,000)
Position: Chief investigator
Project title: Mathematical formulation and analysis of boiling heat and mass transfer subject to simultaneous microwave ultrasound irradiation
Status: On-going (2018–2021)
Funding source: Fundamental Research Grant Scheme, Ministry of Education, Malaysia (RM 92,800)
Position: Co-investigator
Project title: Flow Physics Modelling and Design Optimization of an Exhaust-air Energy Extractor in the Cooling Tower Applications
Status: On-going (2018–2021)
Funding source: Fundamental Research Grant Scheme, Ministry of Education, Malaysia (RM 100,000)
Position: Technical lead
Project title: Finite element modeling and verification study of a Helidesk perimeter net
Status: December 2018 – February 2019
Funding source: Consultancy project from Torr Energy Sdn. Bhd. (RM 50,000)
Position: Chief investigator
Project title: Magnesium Oxide nanoparticles as a potential alternative to copper based fungicide: The pathogenic capabilities and transport properties
Status: March 2020 – Feb 2023
Funding source: Catalyst grant, Sarawak Research and Development Council (SRDC) (RM 190,000)

Professional experience

Senior lecturer, Curtin University Malaysia, (since July 2009 – November 2017)
Research officer, University of Bath, (March 2007 until end of May 2009)
Worked closely with Airbus and SEIC in one of the Integrated Wings work packages (WP3.3), that focuses on the model-based fault diagnosis and isolation techniques for aircraft fuel systems

Professional association

Member, Institution of the Mechanical Engineers (UK)

Lim Chye Ing

PhD, MSc, BEng, PEng, MIEM, PMP, FHEA
Associate Dean, External Engagement
Associate Professor, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 438
Tel: +60 85 630100 Ext:2414
Email: chye.ing@curtin.edu.my

Research profiles

Scopus Profile ID: 56789383300
Google Scholar Profile: https://scholar.google.com/citations?user=FDPq2JEAAAAJ&hl=en
Web of Science ResearcherID: ABA-4949-2020
ORCID Profile: https://orcid.org/0000-0001-9870-7757
ResearchGate Profile: https://www.researchgate.net/profile/Chye-Ing-Lim
LinkedIn: https://www.linkedin.com/in/chye-ing-lim-0a703152/

Background

Associate Professor Ir Dr Lim Chye Ing graduated with a Bachelor of Mechanical Engineering (Hons) from Universiti Tenaga Nasional (UNITEN), Malaysia, MSc Engineering Design (with Distinction) from Loughborough University, United Kingdom, and Doctor of Philosophy – Engineering from Curtin University, Perth, Australia. She is a Professional Engineer with Practicing Certificated in Mechanical discipline, and a Project Management Professional with 10 years of working experience in power and O&G industry, as maintenance engineer and project manager, prior to joining Curtin Malaysia as an academic. She is currently holding the position of Associate Dean, External Engagement for the Faculty of Engineering and Science.

Awards and certifications

2023 InTex Gold Award
2021 Student Choice Award, Curtin University Malaysia
2020 Student Choice Award, Curtin University Malaysia
2009 School Merit Prize, Wolfson School of Mechanical Engineering, Loughborough University
School Merit Prize, Wolfson School of Mechanical Engineering (2009)
Board of Engineers Malaysia (BEM) – Professional Engineer with Practicing Certificate
Project Management Institute (PMI), USA – Project Management Professional
Advance HE, United Kingdom -Fellow of the Higher Education Academy (FHEA)

Research interests

Eco-design
Sustainable engineering
Cleaner production
Energy efficiency
Sustainability management

Publications/patents

a. Patents

Lim, Chye Ing, and K. Biswas Wahidul. 2017. Palm Oil Sustainability Assessment (POSA) Framework. edited by Intellectual Property Corporation of Malaysia. Malaysia. Filling ID: PI2020007232
Lim, Chye Ing, Teo, Vincent and Lee, Si Min. 2022. Closed Loop Parcel Packaging (CLOPP) edited by Intellectual Property Corporation of Malaysia. Malaysia. Filling ID: PI2022007145

b. Copyrights

Filing ID: CRLY2022Q05840/ LY2021E07020
Team Members: Lim Chye Ing, Fethma M.Nor, Sng Wei Lurn, Denni Kuarniawan
Filing Name: Finite Element Analysis on Harvesting Blades
Filing ID: LY2019008108
Team Members: Fethma Binti M.Nor, Sung Aun Naa, Lim Chye Ing, Wong Wei Kitt
Filing Name: Digitalisation of refractometer to measure Brix index of produce
Filing ID: CRLY2022Q05837/ LY2022Q05837
Team Members: Lim Chye Ing
Filing Name: Sustainability Assessment of Malaysian Palm Oil Industries

c. Journals

Suen, Ji Wei, Naveen Kumar Elumalai, Sujan Debnath, Mubarak Nabisab Mujawar, Chye Ing Lim, Moola Mohan Reddy, and Mohammad Khalid. 2023. “Study of Capacitive Behavior and its Inter-Relationship with Electrolyte Solution Concentration in Hybrid Ionogels.” ECS Journal of Solid State Science and Technology.
Suen, Ji Wei, Naveen Kumar Elumalai, Sujan Debnath, Nabisab Mujawar Mubarak, Chye Ing Lim, Mohan Reddy Moola, Yee Seng Tan, and Mohammad Khalid. 2023. “Investigating the Correlation between Electrolyte Concentration and Electrochemical Properties of Ionogels.” Molecules 28 (13): 5192.
Suen, Ji Wei, Naveen Kumar Elumalai, Sujan Debnath, Nabisab Mujawar Mubarak, Chye Ing Lim, and Mohan M. Reddy. 2022. “The Role of Interfaces in Ionic Liquid‐Based Hybrid Materials (Ionogels) for Sensing and Energy Applications.” Advanced Materials Interfaces 9 (34): 2201405.
Wei, S. J., Elumalai, N. K., Debnath, S., Ing, L. C., Reddy, M. M., Mubarak, N. M., & Pramanik, A. (2022). Effect of Concentration of Electrolyte Solution on the Electrochemical Stability of Ionogel. In Materials Science Forum (Vol. 1064, pp. 65–70). Trans Tech Publications, Ltd. https://doi.org/10.4028/p-i9s464 [SCOPUS]
Lim, C. I., & Biswas, W. (2019). Sustainability Implications of the Incorporation of a Biogas Trapping
System into a Conventional Crude Palm Oil Supply Chain. Sustainability, 11(3), 792; doi: 10.3390/su11030792 [Clarivate: Q2; IF: 3.889]
Lim, C.I., & Biswas W.K. (2018). Sustainability assessment for crude palm oil production in Malaysia using the palm oil sustainability assessment framework. Sustainable Development, 1–17. doi.org/10.1002/sd.1872 [Clarivate: Q1; IF: 8.562]
Lim, C. I., & Biswas, W. K. (2017). Development of triple bottom line indicators for sustainability assessment framework of Malaysian palm oil industry. Clean Technologies and Environmental Policy, 1-22. doi:10.1007/s10098-017-1453-7 [Clarivate: Q2: IF: 4.700]
Lim, C. I., & Biswas, W. (2015). An Evaluation of Holistic Sustainability Assessment Framework for Palm Oil Production in Malaysia. Sustainability, 7(12), 16561-16587. doi:10.3390/su71215833 [Clarivate: Q2; IF: 3.889]
Lim, C. I., Biswas, W., & Samyudia, Y. (2015). Review of Existing Sustainability Assessment Methods for Malaysian Palm Oil Production. Procedia CIRP, 26, 13-18. doi:10.1016/j.procir.2014.08.020 [Clarivate: Proceeding]
Woldeyohannes, A.D.; Woldemichael, D.E.; Ing, L.C.; Ru, E.Z. Transportation algorithm for optimizing renewable energy resources utilization at rural areas. Applied Mechanics and Materials 2014, 699, 853-857.
Woldemichael, D.; Hoe, K.C.; Woldeyohannes, A.; Lim, C.I. Design support system for parabolic trough solar collector. Journal of applied sciences 2012, 12, 2474.

d. Conference publications

Woldemichael, D.E, Hoe, K. C., Woldeyohannes, A.D, and Lim, C. I., Design Support System for Parabolic Trough Solar Collector, International Conference on Plant Equipment and Reliability (ICPER2012), Kuala Lumpur, Malaysia.
Abraham D.W., Dereje E.W. and C. I. Lim, Fishbone Diagram Approach for Improving the Passing rate for Basic Engineering Subjects, In Enhancing Learning: Teaching & Learning Conference 2011, An international conference on Teaching and Learning in Higher Education, Sarawak Malaysia.
C. T. Lee and C. I. Lim, Redesigning a Small Electrical and Electronic Appliance for Improved Sustainability , 3^rd CUTSE International Conference 2011, Sarawak, Malaysia.
S. W. Fam and C. I. Lim, Techno-economic Study of a Combined Heat and Power Unit (CHP) with Absorption Chiller for CSM Campus , 2^nd CUTSE International Conference 2010, Sarawak, Malaysia.

Research grants

Curtin Malaysia Teaching Innovation Project Grant 2023 (RM3,000)
Enhance Learning of Presentation Skills through Interactive Peer Observation, Feedback and Reflection
Curtin Malaysia Collaborative Research Matching Grant 2021 (RM20,000)
Investigation and Development of Oil Palm Fresh Fruit Bunch (FFB) Harvesting and Transportation System for Various Terrains in Sarawak – Principal Investigator
FRGS (Ref: FRGS/1/2020/TK0/CURTIN/03/2) (RM 92,237)
Synergistic Effect of Nanocellulose Incorporation on Coulombic Interaction and Energy Dissipation in the Green Conductive Stretchable Composite based on Ionogel and Palm waste – Co-investigator
Sarawak Multimedia Authority Research Grant 2018 (RM150,000)
MySabrix – App based brix reflectometer to measure Brix Index for Fruits and Vegetables in Sarawak – Co-investigator
Public-Private Research Network Fund 2018 (RM30,200)
Microwave Kiln for Beads Production – Co-investigator
Sarawak Multimedia Authority Grant 2018 (RM20,600)
Industry 4.0 Awareness Programme – Organiser

Consultancy projects

Greater Miri Development Master Plan – Economic Planning Unit Sarawak – 2022
Miri Urban Transportation Action Plan – Ministry of Transport Sarawak – 2023
Shell SMDS Shell GTL Saraphalt Performance Additives For Asphalt Warm Mixes CO2 Emission Study
Study of Water Hyacinth in the Rivers of Sarawak – Ministry of Transport Sarawak – 2024

Professional experience

Associate Dean, External Engagement, Faculty of Engineering and Science, Curtin University Malaysia
Associate Professor, Mechanical Engineering Department (March 2022 – Current)
Senior Lecturer, Mechanical Engineering Department (2017 – 2022)
Project Manager, Colour Case Sdn. Bhd. – Petronas LNG Train 9 Project (2014- 2017)
Lecturer, Mechanical Engineering Department (2009 – 2014)
Engineer (Mechanical Maintenance – Gas Turbines), Tuanku Ja’afar Power Station, Port Dickson PD1 (750MW Combined Cycle), Tenaga Nasional Berhad (TNB) – (2004- 2008)
Safety and Training Engineer, Tuanku Ja’afar Power Station, Power Generation Division, Tenaga Nasional Berhad (TNB) – (2002- 2004)
Executive Traineer, Tenaga Nasional Berhad (2001 – 2002)

Professional activities

Honorary Secretary, Institution of Engineers Malaysia, Miri Branch, Session 2017-2018
Vice Chairman II, Institution of Engineers Malaysia, Miri Branch, Session 2018-2019
Honorary Treasurer, Institution of Engineers Malaysia, Miri Branch, Session 2019-2020
Reviewer, Journal of Cleaner Production

Professional associations

Professional Engineer with Practicing Certificate (Mechanical), Board of Engineer Malaysia
Corporate Member, Institution of Engineers, Malaysia
Project Management Professional, Project Management Institute (USA)

Abdul Hamid Bin Abdullah

MSc, BEng, PEng (BEM), CPEng (Australia), MIEAust, ACPE, PTech, MBOT, TAE Cert IV
Program Coordinator, Bachelor of Mechanical Engineering
Senior Lecturer, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 359
Tel: +60 85 630100 Ext:2515
Email: abdul.hamid@curtin.edu.my

Research profiles

ORCID Profile: https://orcid.org/0000-0003-0178-4508
ResearchGate Profile: https://www.researchgate.net/profile/Abdul_Hamid_Abdullah

Background

Mr. Abdul Hamid is an experienced researcher and lecturer, with a focus on the field of polymer composite materials. He obtained his Bachelor of Engineering degree from Universiti Sains Malaysia in 2008, and pursued his MSc degree in the same field under the supervision of Prof Hanafi Ismail from USM. During his MSc studies, he gained valuable research experience as a research officer at USM from 2008 to 2011. After completing his MSc, Mr. Abdul Hamid gained industry experience as a DCS Engineer and Radiation Protection Officer with Tokuyama Corporation, Japan. Upon his return to Malaysia, he worked with Tokuyama Malaysia to train new field engineers and operators on the latest technology transfer for polycrystalline silicon manufacturing plant operation. After his time at Tokuyama Malaysia, Mr. Abdul Hamid joined Curtin Malaysia, where he worked in various departments before being appointed as a Lecturer in the Mechanical Engineering Department, Faculty of Engineering and Science. He has recently been appointed as a program coordinator for mechanical engineering, where he brings his expertise and knowledge to help guide and shape the future of the program. With a keen interest in the areas of polymeric composite materials, materials characterization, and materials testing, Mr. Abdul Hamid continues to contribute to the research community through his extensive knowledge in these fields.

Awards

Long Service Award, Curtin University Malaysia
Best Paper Award – One Curtin International Postgraduate Conference 2018

Subjects taught

Engineering Materials
Resources, Processes and Materials Engineering
Engineering Foundations: Principles, Design and Communication
Fundamentals of Strength of Materials
Advanced Strength of Materials
Machine Dynamics
Diploma Subjects/Units
Engineering Foundation Subjects/Units

Research interests

Polymers, Composites
Materials Characterization
Biomaterials, Green Materials
Rubber
Recycled Materials
Bio-Waste

Publications

a. Journal papers

Wong, D., Anwar, M., Debnath, S., Hamid, A., & Izman, S. (2022). The Influence of Matrix Density on The Weibull Modulus of Natural Fiber Reinforced Nanocomposites. In Materials Science Forum, Vol. 1074, pp. 3–9.
Dominick Wong, Mahmood Anwar, Sujan Debnath, Abdul Hamid, Sudin Izman, A.K. Basak, Alokesh Pramani (2022) Tensile Strength and Morphological Behavior of Treated Oil Palm Empty Fruit Bunch Particle Reinforced Polymeric Composite, Materials Science Forum, 1064 MSF, pp. 27-37.
Wong, D., Anwar, M., Debnath, S., Hamid, A., Izman, S. (2021) A Review: Recent Development of Natural Fiber-Reinforced Polymer Nanocomposites, JOM, 73 (8), pp. 2504-2515.
Wong, D., Anwar, M., Debnath, S., Hamid, A., Izman, S., Pramanik, A. (2021) Degassing process influence on tensile strength of neat e132 epoxy polymeric materials, Materials Science Forum, 1026 MSF, pp. 129-135.
H. Abdullah, A. A. Bakar, H. Ismail, A. W. M. Kahar and S. Debnath (2019) The Effects Of Accelerated Weathering On The Tensile Properties Of Kenaf Reinforced Biocomposites, IOP Conference Series: Materials Science and Engineering, doi:10.1088/1757-899X/495/1/012110
T. Oo, A.H. Abdullah, M. Anwar, N. A. N. Khandoker, S. Islam and S. Debnath (2019) IOP Conference Series: Materials Science and Engineering, doi:10.1088/1757-899X/495/1/012094
W. Kai, A.H. Abdullah and S. Debnath (2019) Mechanical Properties of Hybrid Polymer Composite Using Natural Fiber and Nanoparticle, IOP Conference Series: Materials Science and Engineering, doi:10.1088/1757-899X/495/1/012095
Faisal Amri Tanjung, Yalun Arifin, Abdul Hamid Abdullah, and Iqmal Tahir (2017) BilayerStructured Regenerated Cellulose/Chitosan Films Prepared with Ionic Liquid, Indones. J. Chem., 17 (3), pp. 351 – 359
Abdullah, A. H. & Debnath, S. (2017). Mechanical Performance of Cockle Shell Particles (CSP) and Oil Palm Fibre (OPF) Reinforced Epoxy Composite. International Journal of Engineering Materials and Manufacture, 2(3), 58-66.
Kahar AWM, Ismail H, Abdul Hamid A. (2016). The correlation between crosslink density and thermal properties of high-density polyethylene/natural rubber/thermoplastic tapioca starch blends prepared via dynamic vulcanisation approach, Journal of Thermal Analysis and Calorimetry, 123(1) pp. 301-308.
Ismail, A. Hamid Abdullah, A. Abu Bakar (2010) Kenaf Core Reinforced High-Density Polyethylene/Soya Powder Composites: The Effects of Filler Loading and Compatibilizer, Journal of Reinforced Plastics and Composites, 29 (16) pp. 2489-2497.
Ismail, A. Hamid Abdullah, A. Abu Bakar (2010) Effects of Silane Based Coupling Agent on the Properties of Kenaf Core Reinforced High Density Polyethylene (HDPE)/Soya Powder Composites, Polymer-Plastics Technology and Engineering, 49 (11) pp. 1095-1100.
Ismail, A. Hamid Abdullah, A. Abu Bakar (2010) Influence of Acetylation on the Tensile Properties, Water Absorption and Thermal Stability on High-Density Polyethylene (HDPE)/Soya Powder/Kenaf Core Composites, Journal of Vinyl and Additive Technology, 17(2) pp.132-137.

b. Conference proceedings

Felix Wong Wei Zie, Sujan Debnath, Mahmood Anwar and Abdul Hamid Abdullah, Enhancing Mechanical Performance of Bagasse Fiber-Epoxy Composite by Surface Treatment, 10th International Conference on Manufacturing Science and Technology (ICMST 2019), Sabah, August 9-11, 2019
Abdul Hamid Bin Abdullah, Hanafi Ismail, Azhar Abu Bakar, Sujan Debnath, The Effects of Oxidized Polyethylene as a Compatibilizer on the Tensile and Water Absortion Properties of Biocomposites, 7th International Conference on Manufacturing Science and Technology, Curtin Sarawak, Miri, Sarawak, July 16-18th 2016
Abdul Hamid bin Abdullah, Jaffrey Naan, Chew Ing Ming, Natallee Faith Kwan, An overview: Developing the minds through practical support for Diploma of Process Plant Technology Students in Curtin Sarawak, 2ndInternational Higher Education Teaching and Learning Conference 2013, Parkcity Everly Hotel, Miri, Sarawak, December 9-10th 2013

Research grants and consultancy projects

Performance of green composite material incorporating of cockle-shells and polypropylene fiber, Curtin Sarawak (Curtin Sarawak Research Fund), Principal Investigator, RM10,000 (Completed, 2016)
Matrix Density Influence on Dispersion Behaviour of Oil Palm Filler Reinforced Epoxy Green Nanocomposite, Fundamental Research Grant Scheme of the Ministry of Education (FRGS), Co-Investigator, RM103,200 (On-going)
Nano-Cockle Shell Biofiller Effects on Weathering Resistance Behavior of Epoxy Bio-Composites in Seawater Marine Application, Curtin Malaysia Research Institute Collaborative Research Scheme (CMRI-CRS), Principal Investigator, RM 36,650 (On-going)
Mechanical Performance of Waste Rubber and Water Hyacinth Fiber Reinforced Hybrid Polymer Composite, Curtin Malaysia Collaborative Research Scheme (CMCR) Co-Investigator (RM 20,000) (On-going)
The Mechanical Strength of Palm Oil Fibre and Water Hyacinth Fibre-Reinforced Polymer Composite has the Potential for Structural Applications, Curtin Malaysia Higher Degree Research Grant, Co-investigator, RM32,700 (On-going)
Thermoset Matrix Influence on Dispersion Behaviour Towards Impact Performance of Water Hyacinth/Waste Rubber Hybrid Composites. Fundamental Research Grant Scheme of the Ministry of Education (FRGS), Co-Investigator, RM126,800 (On-going)
Advanced Computer-Aided Design Training for EFY Future Innovator in INDE1001 unit, Curtin Malaysia Teaching Support Fund (CMTS) 2024, Principal Investigator (Completed)

HDR supervision

1 MPhil (On-going)
30 UG (Completed), 1 UG (On-going)

Professional experience

Lecturer, Mechanical Engineering, Curtin Malaysia (July 2018 – Current)
Lecturer, Petroleum Engineering, Curtin Malaysia (Jan 2015 – Jun 2018)
Lecturer, Process Plant Technology, Curtin Malaysia (Jun 2012 – Dec 2014)
Engineer, Tokuyama Malaysia Sdn. Bhd (Mar 2012 – Jun 2012)
Engineer, Tokuyama Corporation, Japan (Mar 2011 – Feb 2012)
Research Officer, Universiti Sains Malaysia (May 2008 – Feb 2011)
Internship, Hokuetsu Seishi Paper Mills Ltd, Japan (May 2007 – July 2007)

Professional activities

Reviewer, 2nd International Congress on Engineering & Technology 2024 (ICET 2024) – Symposium of Engineering, Technology & Industrial Applications 2024 (SETIA 2024)
Reviewer, International Conference on Energy Transition and Exhibition 2024 (ICETe 2024)
Committee, International Conference on Digital Application, Transformation & Economy (ICDATE 2023)
Secretariat, International Conference on Energy Transition and Exhibition 2024 (ICETe 2024)
Committee, International Conference on Green Energy, Computing and Sustainable Technology 2024 (GECOST 2024)
Treasurer, 17th International Conference on Materials Processing and Characterization 2025 (ICMPC 2025)
Programme Coordinator, Mechanical Engineering Department (2023-Current)
Chair, Board of Studies, Mechanical Engineering Department (2023-Current)
Accreditation Committee, Mechanical Engineering Department (2023-Current)
Head, Faculty’s IP and Commercialization Working Group (2022-Current)
Board of Studies, Engineering First Year, Faculty of Engineering (2021-2023)
Committee Member, Students and Alumni Relation Committee (SARC) (2022)
Committee Member, Faculty’s Safety and Health (2016-2022)
Committee Member, Faculty’s Website and Marketing (2015-2016)
Committee Member, Student Staff Consultative Committee (SSCC) (2015-2016)
Internal Academic Auditor for Diploma of Instrumentation and Control Engineering (2014)
Management Committee for Azman Islamic Centre, Curtin Malaysia (2016-2018)
Committee Member, Curtin Malaysia Open Day (2012-2015)
Unit Leader for Teaching Units (2012-2022)
Board of Examiners (2012-2022)
Chief Invigilator for Final Exams (2012-2022)
Curtin Malaysia Representative for Sarawak Education Expo (2022-2024)

Professional associations

Chartered Professional Engineer, Engineers Australia (EA)
Professional Technologist, Malaysian Board of Technologist (MBOT)
ASEAN Chartered Professional Engineer (ACPE)
Professional Engineer, Board of Engineers Malaysia (BEM)
Graduate Member, Institute of Engineers Malaysia (IEM)
Member, International Association of Engineers (IAENG)
TTT Certified Trainer (HRDCorp)

Ted Sun Loh

MSc, BEng, PEPC (BEM), MIEM, PMP
Adjunct Lecturer, Mechanical & Mechatronic Engineering Department

Location: Skylark 3
Tel: +60 85 630100
Email: lohtedsun@curtin.edu.my

Research interests

Renewable Energy Systems and Technology, Project Management, Corrosion Protection, Agriculture Technology

Professional experience

Managing Director, Colour Case Sdn Bhd (Aug. 2012 – current)
Site Manager, Petronas LNG Train 9 Project, Colour Case Sdn Bhd (Feb. 2014 to July. 2017)
Senior Mechanical Engineer, Murum Hydroelectric Project, Sarawak Energy (July. 2010 to Aug. 2012)
Manager Asset Management & O&M, Powertek Berhad (Oct, 2009 to July. 2010)
Project & Commissioning Engineer / Shift Charge Engineer / Engineer Production Planning, Optimization & Performance, Tuanku Ja’afar Power Station Tenaga Nasional Berhad (2003 to 2007)
Project & Commissioning Engineer, Shift Charge Engineer, Gelugor Power Station Penang, Tenaga Nasional Berhad (2001 to 2003)

Professional activities

Executive Committee, Institution of Engineers Malaysia, Miri Branch, Session 2018-2019

Professional associations

Professional Engineer with Practicing Certificate (Mechanical), Board of Engineers Malaysia
Corporate Member, Institution of Engineers, Malaysia
Project Management Professional, Project Management Institute (USA)

Jundika Candra Kurnia

PhD (Mech Eng, NUS), CEng MIMechE, PTech MBOT, Sr PEng IEI (IPM PII), ASEAN Eng
Associate Professor, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 432
Tel: +60 85 630100 Ext:2517
Email: jundika.kurnia@curtin.edu.my

Research profiles

ResearchGate: https://www.researchgate.net/profile/Jundika-Kurnia-2
ORCID: https://orcid.org/0000-0003-1334-6484
Google scholar: https://scholar.google.com/citations?user=75IJyXMAAAAJ&hl=en
Scopus: https://www.scopus.com/authid/detail.uri?authorId=35275124900

Awards

Bronze Medal, 8th Teaching and Learning Innovation Festival (TLIF) 2021
Gold Medal, 7th Teaching and Learning Innovation Festival (TLIF) 2021
Best Presenter Award, 2021 International Conference on Advancing and Redesigning Education (ICARE’21)
Silver Medal, 6th Teaching and Learning Innovation Festival (TLIF) 2020
DAAD Research Stay Award in Germany 2019
Bronze Medal, 5th Teaching and Learning Innovation Festival (TLIF) 2019
Best Academic Liaison Officer 2019
Journal Publication Award, UTP Quality Day 2018.
Effective Education Delivery Award, UTP Quality Day 2018.
NUS Research Scholarship for Doctor of Philosophy in National University of Singapore
AUN/SEED-Net Scholarship for Master of Engineering in National University of Singapore
Singapore Airlines Scholarship for Bachelor of Engineering in Gadjah Mada University

Academic history

Engineer (Ir), Engineers Profession Program, Bandung Institute of Technology, Indonesia (2022)
Post-doctoral researcher, Khalifa University, Abu Dhabi, United Arab Emirates (2014)
Post-doctoral research fellow, National University of Singapore (2013)
Doctor of Philosophy, National University of Singapore (2012)
Bachelor Degree in Engineering, Gadjah Mada University, Yogyakarta, Indonesia (2007)

Research interests

Computational fluid dynamics
Thermal fluids engineering
Energy systems
Energy storage

Selected publications

a. Books and book chapters

A.P. Sasmito, J.C. Kurnia, S.V. Jangam, 2011, Mathematical Modeling of Transport Processes, TPR Group, Singapore, ISBN: 978-981-08-9179-4
1. J.C. Kurnia, A.P. Sasmito, 2020, Hydrogen Fuel Cell in Vehicle Propulsion: Performance, Efficiency, and Challenge, in: Energy Efficiency in Mobility Systems, edited by S.A. Sulaiman, Springer Nature Singapore (ISBN:978-981-15-0101-2) (doi:10.1007/978-981-15-0102-9_2)
J.C. Kurnia, P. Xu, A.P. Sasmito, A.S. Mujumdar, 2019, Thermal Drying Utilizing Intermittent and Pulsating Impinging Jet, in: Heat and Mass Transfer in Drying of Porous Media, edited by P. Xu, A.P. Sasmito, A.S. Mujumdar, CRC Press, Boca Raton (doi: 10.1201/9781351019224)
A.P. Sasmito, J.C. Kurnia, M. Guan, E. Birgersson, A.S. Mujumdar, 2012. Computational Fluid Dynamics Analysis of Total Air-Conditioning in Underground Mines, in: Engineering Application of Computational Fluid Dynamics – Volume 2, edited by M.A.R.S. Al-Baghdadi, International Energy and Environment Foundation. ISBN: 978-1478329350.
J.C. Kurnia, A.P. Sasmito, T. Wei, A.S. Mujumdar, 2011, Conjugate Model for Drying of Thin Slabs Using Impinging Jets, in: Drying of Foods, Vegetables and Fruits – Volume 3, edited by S.V. Jangam, C.L. Law and A.S. Mujumdar, TPR Group, Singapore, ISBN: 978-981-08-9426-9.
J. C. Kurnia, A. P. Sasmito, A. S. Mujumdar, 2011, Heat Transfer in Square duct, Lecture notes in: Selected Topics in Heat and Mass Transport, TPR group, Singapore.
J. C. Kurnia, A. P. Sasmito, A. S. Mujumdar, 2011, Computational Study of Energy-Efficient Thermal Drying Using Intermittent Impinging Jets, Lecture notes in: Selected Topics in Heat and Mass Transport, TPR group, Singapore.
J. C. Kurnia, E. Birgersson, and A. S. Mujumdar, 2009, Heat and mass transfer in gels, in Mathematical Modeling of Industrial Transfer Process, edited by Xu Peng, Wu Zhonghua, A. S. Mujumdar., pp. 57-68, TPR Group, Singapore. ISBN: 978-981-08-6269-5.

b. Journal publications

K.L. Liaw, K.C. Ong, M.A.M Ali Zar, W.K. Lai, M.F. Muhammad, Firmansyah, J.C. Kurnia, 2023, Experimental and Numerical Investigation of an Innovative Non-combustion Impulse Gas Turbine for Micro-scale Electricity Generation, Energy, Vol. 266, pp. 126433 (doi:10.1016/j.energy.2022.126433)
K.L. Liaw, J.C. Kurnia, Z.A. Putra, M. Aziz, A.P. Sasmito, 2023, Enhanced turbulent convective heat transfer in helical twisted Multilobe tubes, International Journal of Heat and Mass Transfer, Vol. 202, pp. 123687 (doi:10.1016/j.ijheatmasstransfer.2022.123687)
A.A. Soomro, A.A. Mokhtar, J.C. Kurnia, N. Lashari, U. Sarwar, M. Inayat, T. L. Oladosu, 2022, A review on Bayesian modeling approach to quantify failure risk assessment of oil and gas pipelines due to corrosion, International Journal of Pressure Vessels and Piping, Vol. 200, pp. 104841 (doi:10.1016/j.ijpvp.2022.104841)
J.C. Kurnia, A. Ahmadihosseini, A.P. Sasmito, 2022, Flow behavior and mixing of single-phase laminar Newtonian miscible fluid in T-junction micromixer with twisted mixing channel – A numerical study, Chemical Engineering and Processing – Process Intensification, Vol.181, pp. 109171, (doi:10.1016/j.cep.2022.109171)
K.L. Liaw, J.C. Kurnia, A.P. Sasmito, 2022, Laminar convective heat transfer in helical twisted multilobe tubes, Case Studies in Thermal Engineering, Vol. 39, pp. 102459 (doi: 10.1016/j.csite.2022.102459)
J.C.Kurnia, L.A.F. Haryoko, I. Taufiqurrahman, L. Chen, L. Jiang, Agus P.Sasmito, Optimization of an innovative hybrid thermal energy storage with phase change material (PCM) wall insulator utilizing Taguchi method, Journal of Energy Storage, Vol. 49, pp. 104067 (doi: 10.1016/j.est.2022.104067)
P.H. Agson-Gani, A.F. Zueter, M. Xua, S.A. Ghoreishi-Madiseh, J.C.Kurnia, A.P. Sasmito,Thermal and hydraulic analysis of a novel double-pipe geothermal heat exchanger with a controlled fractured zone at the well bottom, Applied Energy, Vol. 310, pp. 118407(doi: 10.1016/j.apenergy.2021.118407)
J.C. Kurnia, B.A. Chaedir, A.T. Wijayanta A.P. Sasmito, 2022, Flow and heat transfer characteristics of Herschel–Bulkley non-Newtonian fluids in helical heat exchanger with twisted tape insert, Industrial Industrial & Engineering Chemistry Research (doi: 10.1021/acs.iecr.1c02234)
J.C. Kurnia, M.S. Shatri, Z. A. Putra, J. Zaini, W. Caesarendra, A.P. Sasmito, 2022, Geothermal Energy Extraction Using Abandoned Oil and Gas Wells: Techno-Economic and Policy Review, International Journal of Energy Research, Vol 46, pp. 28-60 (doi: 10.1002/er.6386)
A.A. Soomro, A.A. Mokhtar, J.C. Kurnia, N. Lashari, H. Lu, C. Sambo, 2022, Integrity assessment of corroded oil and gas pipelines using machine learning: A systematic review, Engineering Failure Analysis Vol. 131, 105810 (doi: 10.1016/j.engfailanal.2021.105810)
J.C. Kurnia, Z. A. Putra, O. Muraza, S.A. Ghoreishi‐Madiseh, A.P. Sasmito, 2021, Numerical evaluation, process design and techno-economic analysis of geothermal energy extraction from abandoned oil wells in Malaysia, Renewable Energy, Vol 175, pp. 868-879 (doi: 10.1016/j.renene.2021.05.031)
B.A. Chaedir, J.C. Kurnia, A.P. Sasmito, 2021, Advance in dewatering and drying in mineral processing, Drying Technology, Vol 39 (11), pp. 1667-1684 (doi: 10.1080/07373937.2021.1907754)
H. Kalantari, S.A. Ghoreishi‐Madiseh, A.P. Sasmito, J.C. Kurnia, 2021, An analytical correlation for conjugate heat transfer in fin and tube heat exchangers, International Journal of Thermal Science , Vol 164, 106915 (doi: 10.1016/j.ijthermalsci.2021.106915)
K.L. Liaw, J.C. Kurnia, A.P. Sasmito, 2021, Turbulent Convective Heat Transfer in Helical Tube with Twisted Tape Insert, International Journal of Heat and Mass Transfer, Vol. 169, 120918 (doi: 10.1016/j.ijheatmasstransfer.2021.120918)
J.C. Kurnia, B.A. Chaedir, A.P. Sasmito, T. Shamim, 2021, Progress on Open Cathode Proton Exchange Membrane Fuel Cell: Performance, Challenges and Future Directions, Applied Energy, (doi: 10.1016/j.apenergy.2020.116359)
F. Azlan, J.C. Kurnia, B.T. Tan, M.-Z. Ismadi, 2021, Review on optimisation methods of wind farm array under three classical wind condition problems, Renewable & Sustainable Energy Reviews Vol. 135, 110047 (doi:10.1016/j.rser.2020.110047)
N.I. Mat Nawi, M.R. Bilad, G. Anath, J.C. Kurnia, Y. Wibisono, N.A. H. Nordin, N. Arahman, 2020, The Water Flux Dynamic in a Hybrid Forward Osmosis-Membrane Distillation for Produced Water Treatment, Membrane Vol 10(9), pp. 225 (doi: 10.3390/membranes10090225)
M. Fong, J.C. Kurnia, A.P. Sasmito, 2020, Application of Phase Change Material-Based Thermal Capacitor in Double Tube Heat Exchanger—A Numerical Investigation, Energies, Vol. 13(17), 4327 (doi:10.3390/en13174327)
B.A. Chaedir, J.C. Kurnia, L. Chen, L. Jiang, A.P. Sasmito, 2019, Numerical Investigation of Ventilation Air Methane Catalytic Combustion in Circular Straight and Helical Coil Channels with Twisted Tape Insert in Catalytic-Monolith Reactors, Catalyst Vol 10(7), 797 (doi:10.3390/catal10070797)
J.D. Templeton, S.A. Ghoreishi‐Madiseh, F.P. Hassani, A.P. Sasmito, J.C. Kurnia, 2020, Numerical and experimental study of transient conjugate heat transfer in helical closed‐loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes, International Journal of Energy Research, Vol. 44 (12), pp. 9609-9616 (doi: 10.1002/er.5457)
L.A.F. Haryoko, J.C. Kurnia, A.P. Sasmito, 2020, Numerical Investigation of Subcooled Boiling Heat Transfer in Helically-Coiled Tube, International Journal of Automotive and Mechanical Engineering, Vol. 17 (1), pp. 7675-7686 (doi: 10.15282/ijame.17.1.2020.15.0570)
J.C. Kurnia, B.A. Chaedir, A.P. Sasmito, 2020, Laminar convective heat transfer in helical tube with twisted tape insert, International Journal of Heat and Mass Transfer, Vol. 150, 119309 (doi:10.1016/j.ijheatmasstransfer.2020.119309 )
J.S. Appasamy, J.C. Kurnia, M.K. Assadi, 2019, Synthesis and Evaluation of Nitrogen-doped Titanium Dioxide/Single Walled Carbon Nanotube-based Hydrophilic Self-cleaning Coating Layer for Solar photovoltaic Panel Surface, Solar Energy Vol. 196, pp. 80-91 (doi:10.1016/j.solener.2019.12.022)
J.C. Kurnia, A.P. Sasmito, 2020, Performance Evaluation of Liquid Mixing in T-Junction Passive Micromixer with Twisted Tape Insert, Industrial & Engineering Chemistry Research, Vol 59 (9), pp. 3904-3915 (doi:10.1021/acs.iecr.9b04535)
H.H. Kayiem, D.C. Lim, J.C. Kurnia, 2020, Large eddy simulation of near wall turbulent flow over streamlined riblet-structured surface for drag reduction in a rectangular channel, Thermal Science, Vol 24 (5-A), pp. 2793-2808 (doi: 10.2298/TSCI190909059A)
J.C. Kurnia, S.A. Ghoreishi-Madiseh, A.P. Sasmito, 2020, Heat transfer and entropy generation in concentric/eccentric double-pipe helical heat exchangers, Heat Transfer Engineering Vol 41 (18), pp. 1552-1575 (doi: 10.1080/01457632.2019.1661666)
S.W.Y. Cheng, J.C. Kurnia, S.A. Ghoreishi-Madiseh, A.P. Sasmito, 2019, Optimization of Geothermal Energy Extraction from Abandoned Oil Well with a Novel Well Bottom Curvature Design Utilizing Taguchi Method, Energy, Vol 188, pp. 116098 ( doi: 10.1016/j.energy.2019.116098)
J.C. Kurnia, A.P. Sasmito, T. Shamim, 2019, Advances in proton exchange membrane fuel cell with dead-end anode operation: A review, Applied Energy Vol 252, pp. 113416 (doi:10.1016/j.apenergy.2019.113416)
M. Fong, M.A. Alzoubi, J.C. Kurnia, A.P. Sasmito, On the performance of ground coupled seasonal thermal energy storage for heating and cooling: A Canadian context, Applied Energy Vol 250, pp. 593-604 (doi:10.1016/j.apenergy.2019.05.002)
J.C. Kurnia, B.A. Chaedir, D.C. Lim, L. Chen, L. Jiang, A.P. Sasmito, 2019, Numerical Evaluation of Potential Catalyst Saving for Ventilation Air Methane Catalytic Combustion in Helical Coil Reactors with Selective Wall Coating, Catalyst Vol 9(4), 380 (doi:10.3390/catal9040380)
Z.A. Putra, J.C. Kurnia, A.P. Sasmito, O. Muraza, Process design and techno-economic analysis of ethyl levulinate production from carbon dioxide and 1,4-butanediol as an alternative biofuel and fuel additive, International Journal of Energy Research, Vol 43 (11), pp. 5932-5945 (doi:10.1002/er.4702)
J.C. Kurnia, D.C. Lim, L. Chen, L. Jiang, A.P. Sasmito, 2019, Entropy Generation and Heat Transfer Performance in Microchannel Cooling, Entropy Vol 21(2), 191(doi: 10.3390/e21020191)
M. Inayat, S.A. Sulaiman, J.C. Kurnia, M Shahbaz, 2019, Effect of various blended fuels on syngas quality and performance in catalytic co-gasification: A review, Renewable & Sustainable Energy Reviews Vol 105, pp. 252-267 (doi:10.1016/j.rser.2019.01.059)
M. Inayat, S.A. Sulaiman, J.C. Kurnia, M.Y. Naz, 2019, Catalytic and noncatalytic gasification of wood–coconut shell blend under different operating conditions, Environmental Progress & Sustainable Energy, Vol 38 (2), pp. 688-698. (doi:10.1002/ep.13003)
M. Inayat, S.A. Sulaiman, J.C. Kurnia, 2019, Catalytic co-gasification of coconut shells and oil palm fronds blends in the presence of cement, dolomite, and limestone: Parametric optimization via Box Behnken Design, Journal of the Energy Institute Vol. 92(4), pp. 871-882. (doi:10.1016/j.joei.2018.08.002)
J.C. Kurnia, A.P. Sasmito, 2018, Numerical investigation of heat transfer performance of a rotating latent heat thermal energy storage, Applied Energy, Vol 227, pp. 542-554 (doi:10.1016/j.apenergy.2017.08.087)
J.C. Kurnia, A.P. Sasmito, 2017, T. Shamim, 2017, Performance Evaluation of a PEM Fuel Cell Stack with Variable Inlet Flows under Simulated Driving Cycle Conditions, Applied Energy, Vol 206, pp. 751–764. (doi:10.1016/j.apenergy.2017.08.224)
Y. Lu, S. Akhtar, A.P. Sasmito, J.C. Kurnia, 2017, Prediction of air flow, methane, and coal dust dispersion in a room and pillar mining face, International Journal of Mining Science and Technology Vol. 27, pp. 657–662 (doi: 10.1016/j.ijmst.2017.05.019)
J.C. Kurnia, A.P. Sasmito, P. Xu, AS Mujumdar, 2017, Performance and Potential Energy Saving of Thermal Dryer with Intermittent Impinging Jet, Applied Thermal Engineering, Vol. 113, pp. 246-258 (doi:10.1016/j.applthermaleng.2016.11.036)
A.P. Sasmito, J.C. Kurnia, A.S. Mujumdar, 2017, Optimization of an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method, Applied Energy, Vol 185 (2), pp. 1225-1232 (doi:10.1016/j.apenergy.2015.12.098)
S. Akhtar, M. Khan, J.C. Kurnia, T. Shamim, 2017, Numerical Investigation of Energy Conversion and Flame Stability in a Curved Micro-Combustor for Thermo-photovoltaic (TPV) Applications, Applied Energy, Vol. 192, pp. 134–145. (doi:10.1016/j.apenergy.2017.01.097)
J.C. Kurnia, A.P. Sasmito, 2016, Heat transfer performance of non-circular coiled tubes – research summary, challenges and directions, International Journal of Automotive and Mechanical Engineering, Vol 13( 3), pp. 3710-3727.(doi: 10.15282/ijame.13.3.2016.14.0304)
J.C. Kurnia, P. Xu, A.P. Sasmito, 2016, A Novel Concept of Enhanced Gas Recovery Strategy from Ventilation Air Methane in Underground Coal Mines – A Computational Investigation, Journal of Natural Gas Science & Engineering, Vol 35 Part A, pp. 661-672. (doi:10.1016/j.jngse.2016.09.013)
J.C. Kurnia, S.V. Jangam, S. Akhtar, A.P. Sasmito, A.S. Mujumdar, 2016, Advances in biofuel from oil palm and palm oil processing waste: a review, Biofuel Research Journal Vol 3(1), pp. 332-346 (doi:10.18331/BRJ2016.3.1.3)
J.C. Kurnia, A.P. Sasmito, T. Shamim, A.S. Mujumdar, 2016, Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections, Applied Thermal Engineering, Vol. 102, pp. 849-860. (doi: 10.1016/j.applthermaleng.2016.04.037)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2016, Performance evaluation of coiled square tubes at large temperature difference for heat exchanger applications, Heat Transfer Engineering, Vol. 37 (16), pp. 1341-1356. (doi: 10.1080/01457632.2015.1136141)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2016, Potential catalyst savings in heterogeneous in-plane spiral reactor utilizing selective wall coating – A computational study, Computers and Chemical Engineering, Vol 88, pp. 59-72. (doi: 10.1016/j.compchemeng.2016.02.004)
S. Akhtar, J.C. Kurnia, T. Shamim, 2015, A three-dimensional computational model of h2-air premixed combustion in non-circular micro-channels for thermo-photovoltaic (TPV) application, Applied Energy Vol. 152, pp. 47-57 (doi: 10.1016/j.apenergy.2015.04.068)
A.P. Sasmito, J.C. Kurnia, E. Birgersson, A.S. Mujumdar, 2015, Computational evaluation of thermal management strategies in an underground mine, Applied Thermal Engineering (selected paper from World Mining Congress 2013),Vol 90, pp. 1144-1150. (doi:10.1016/j.applthermaleng.2015.01.062)
J.C. Kurnia, A.P. Sasmito, F.P. Hassani, A.S. Mujumdar, 2015, Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces – A computational study, International Journal of Mining Science and Technology, Vol 25, pp. 537-543. (doi:10.1016/j.ijmst.2015.05.004)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2014, Laminar heat transfer performance of power law fluids in coiled square tube with various configurations, International Communications in Heat and Mass Transfer. Vol 57, pp. 100-108. (doi: 10.1016/j.icheatmasstransfer.2014.07.016)
B. Mohan, J. Puqing, A.P. Sasmito, J.C. Kurnia, S.V. Jangam, A.S. Mujumdar, 2014, Numerical Evaluation of the Effect of Inlet Flow Pulsation in Heterogeneous Gaseous T-junction Micro-reactor, Industrial and Engineering Chemistry Research, Vol. 53 (49), pp 18699–18710. (doi: 10.1021/ie500797f)
J.C. Kurnia, A.P. Sasmito, E. Birgersson, T. Shamin, A.S. Mujumdar, 2014, Evaluation of mass transport performance in heterogeneous gaseous in-plane spiral reactors with various cross-section geometries at fixed cross-section area, Chemical Engineering and Processing. Vol 82, pp. 101-111. (doi: 10.1016/j.cep.2014.06.004)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2014, Prediction and Innovative Control Strategies for Oxygen and Hazardous Gases in Underground Mines, Science of the Total Environment. Vol 48, pp. 317–334. (doi: 10.1016/j.scitotenv.2014.02.058)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2014, Simulation of A Novel Intermittent Ventilation System for Underground Mines, Tunneling and Underground Space Technology. Vol 42, pp. 206–215. (doi: 10.1016/j.tust.2014.03.009)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2014, Dust Dispersion and Management in Underground Mining Faces, International Journal of Mining Science and Technology. Vol. 24, Issue 1, pp. 39-44. (doi: 10.1016/j.ijmst.2013.12.007)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2014, CFD Simulation of Methane Dispersion and Innovative Methane Management in Underground Mining Faces, Applied Mathematical Modelling. Vol. 38, Issue 14, pp. 3467-3484. (doi: 10.1016/j.apm.2013.11.067)
J.C. Kurnia, A.P. Sasmito, S.V. Jangam, A.S. Mujumdar, 2013, Heat Transfer in Coiled Square Tubes for laminar flow of a slurry of Microencapsulated Phase Change Material (MEPCM), Heat Transfer Engineering special Issue IMPRES 2010. Vol. 34, Issue 11-12, pp. 994-1007. (doi: 10.1080/01457632.2012.753821)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2013, Energy-Efficient Thermal Drying Using Impinging-Jets with Time-Varying Heat Input – A Computational Study, Journal of Food Engineering. Vol. 144 (2), pp 269–277.(doi: 10.1016/j.jfoodeng.2012.08.029)
J.C. Kurnia, A.P. Sasmito, S.V. Jangam, A.S. Mujumdar, 2013, Improved Design for Heat Transfer Performance of a Novel Phase Change Material (PCM) Thermal Energy Storage (TES), Applied Thermal Engineering. Vol. 50 (1), pp. 896–907. (doi: 10.1016/j.applthermaleng.2012.08.015)
A.P. Sasmito, J.C. Kurnia, A.S. Mujumdar, 2012, Numerical Evaluation of Various Gas and Coolant Channel Designs for High Performance Liquid-Cooled Proton Exchange Membrane Fuel Cell Stacks, Energy, Vol. 44 (1), pp. 278-291. (doi: 10.1016/j.energy.2012.06.030)
A.P. Sasmito, J.C. Kurnia, S.V. Jangam, W. Wang, A.S. Mujumdar, 2012, Numerical analysis of laminar heat transfer performance of in-plane spiral ducts with various cross sections at fixed cross section area, International Journal of Heat and Mass Transfer, Vol. 55 (21-22), pp. 5882-5890 . (doi: 10.1016/j.ijheatmasstransfer.2012.05.085)
J.C. Kurnia, E. Birgersson, A.S. Mujumdar, 2012, Finite deformation of fast-response thermo-sensitive hydrogels – A computational study, Polymer, Vol. 53 (12), pp. 2500-2508. (doi: 1016/j.polymer.2012.03.049)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2012, Laminar convective heat transfer for in-plane spiral coils of non-circular cross sections ducts: A computational fluid dynamics study, Thermal Science, Vol 16 (1), pp. 109-118. (doi: 10.2298/TSCI100627014K)
J.C. Kurnia, E. Birgersson, A. S. Mujumdar, 2012, A Phenomenological Model for Hydrogels with Rigid Skin Formation, International Journal of Applied Mechanics, Vol. 4 (1), pp. 1250007 (doi: 10.1142/S1758825112001361)
J.C. Kurnia, E. Birgersson, and A.S. Mujumdar, 2012, Analysis of a model for pH-sensitive hydrogels, Polymer, Vol. 53, pp. 613-622. (doi: 10.1016/j.polymer.2011.11.054)
H. An, A. Li, A.P. Sasmito, J.C. Kurnia, S.V. Jangam, A.S. Mujumdar, 2012, Computational Fluid Dynamics (CFD) Analysis of Micro-reactor Performance: Effect of Various Configurations, Chemical Engineering Science, Vol. 75, pp. 85-95. (doi: 10.1016/j.ces.2012.03.004)
M. Shaker, H. Ghaedamini, A.P. Sasmito, J.C. Kurnia, S.V. Jangam, A.S. Mujumdar, 2012, Numerical Investigation of Laminar Mass Transport Enhancement in Gaseous Microreactors, Chemical Engineering Processing: Process Intensification, vol. 54, pp. 1-11. (doi: 10.1016/j.cep.2012.02.001)
J.C. Kurnia, E. Birgersson, and A.S. Mujumdar, 2011, Computational Study of pH-sensitive Hydrogel-based Microfluidic Flow Controllers, Journal of Functional Biomaterials, Vol. 2 (3), pp. 195-212. (doi: 10.3390/jfb2030195)
J.C. Kurnia, E. Birgersson, A.S. Mujumdar, S.P. Tay, Y.K. Yew, H. Li, 2011, A phenomenological model for coupled alcohol and temperature sensitive hydrogels, International Journal of Applied Mechanics. Vol. 3 (2), pp. 279-298. (doi: 10.1142/S1758825111000981)
A.P. Sasmito, J.C. Kurnia, A.S. Mujumdar, 2011, Numerical evaluation of transport phenomena in a T-junction micro-reactor with coils of different configurations. Industrial and Engineering Chemistry Research, Vol. 51 (4), pp. 1970–1980. (doi: 10.1021/ie200139s)
A.P. Sasmito, J.C. Kurnia, A.S. Mujumdar, 2011, Numerical evaluation of laminar heat transfer enhancement in nanofluid flow in coiled square tubes. Nanoscale Research Letters Vol. 6, pp. 376. (doi: 10.1186/1556-276X-6-376)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2011, Numerical investigation of laminar heat transfer performance of various cooling channel designs, Applied Thermal Engineering Vol. 31, pp 1293-1304. (doi: 10.1016/j.applthermaleng.2010.12.036)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, 2011, Evaluation of heat transfer performance of helical coils of non-circular tubes, Journal of Zhejiang University-Science A (Applied Physics & Engineering),Vol. 12 (1), pp 63-70. (doi: 10.1631/jzus.A1000296)
J.C. Kurnia, E. Birgersson, A.S. Mujumdar, L.C. Quah, 2009, Mathematical Modeling of Hydrogels for Microfluidic Flow Control, Advanced Material Research, Vol. 74 pp. 33-36. (doi: 10.4028/www.scientific.net/AMR.74.33)
P. Xu, Z.H. Wu, S.M.A. Rahman, A.P. Sasmito, J.C. Kurnia, P.H. Joo, E. Birgersson, Report on Honorary Doctorate for Editor-in-Chief Professor Arun S. Mujumdar Receives Doctor Honoris Causa Award from Lodz Technical University, Poland on June 11, 2008, Drying Technology, Vol 26, pp. 1618-1622. (doi: 10.1080/07373930802467581)

c. Conference proceedings

H.H. Al-Kayiem, M. Effendy, T.W.B. Riyadi, J.C. Kurnia, A. Morganadus, Influence of Life Green Wall and Roof Shedding on the Internal Thermal Condition of Buildings: Case Study in Malaysia, 7th International Conference on Production, Energy and Reliability (ICPER 2020), 13-15 July 2021, Virtual Conference Platform hosted by Universiti Teknologi PETRONAS. Proceedings published in Lecture Notes in Mechanical Engineering. Springer, Singapore. (doi: 10.1007/978-981-19-1939-8_3)
L.A.F Haryoko J.C.Kurnia, A.P. Sasmito, Numerical Investigation of Laminar Convective Heat Transfer of Nanofluid in Parallel Cooling Channels, 7th International Conference on Production, Energy and Reliability (ICPER 2020), 13-15 July 2021, Virtual Conference Platform hosted by Universiti Teknologi PETRONAS. Proceedings published in Lecture Notes in Mechanical Engineering. Springer, Singapore. (doi: 10.1007/978-981-19-1939-8_22)
B.W. Riyandwita, J.C. Kurnia, S. Hastuty, M.A. Barrinaya, Performance Evaluation of Thermal Energy Storage with Phase Change Material in Smooth and Expanded Pipe Flow Using Numerical Simulation, 7th International Conference on Production, Energy and Reliability (ICPER 2020), 13-15 July 2021, Virtual Conference Platform hosted by Universiti Teknologi PETRONAS. Proceedings published in Lecture Notes in Mechanical Engineering. Springer, Singapore. (doi: 10.1007/978-981-19-1939-8_20)
L.A.F Haryoko J.C.Kurnia, M.A Abd Majid, Investigation of Heat Transfer Enhancement of a Planar Latent Heat Thermal Energy Storage, 7th International Conference on Production, Energy and Reliability (ICPER 2020), 13-15 July 2021, Virtual Conference Platform hosted by Universiti Teknologi PETRONAS. Proceedings published in Lecture Notes in Mechanical Engineering. Springer, Singapore. (doi:10.1007/978-981-19-1939-8_19)
K.L. Liaw, J.C. Kurnia, Numerical Investigation of Boiling Flow in Oval Tube with Different Ellipticity, 1st International Conference on Technologies for Smart Green Connected Society (2021), 29th-30th November 2021, Virtual Conference Platform hosted by Yamagata University. Proceeding published on ECS Transaction (doi: 10.1149/10701.1919ecst).
S.Y.Y. Ting, K.L. Liaw, J.C. Kurnia, Investigation on the Effect of Nanoparticle Diameter and Concentration on the Performance of Nanofluid Solar Pond, 1st International Conference on Technologies for Smart Green Connected Society (2021), 29th-30th November 2021, Virtual Conference Platform hosted by Yamagata University. Proceeding published on ECS Transaction (doi: 10.1149/10701.0151ecst).
A. R. Chin, J.C. Kurnia, A.P. Sasmito, Pore-Scale Modelling in Metal Foam Heat Exchanger, 1st International Conference on Technologies for Smart Green Connected Society (2021), 29th-30th November 2021, Virtual Conference Platform hosted by Yamagata University. Proceeding published on ECS Transaction (doi: 10.1149/10701.7713ecst).
J.C. Kurnia, A Ahmad, 2021, Microsoft team channel and breakout room for group discussion in scientific inquiry class, Teaching and Learning Festival 2021, 22 November 2021, Universiti Teknologi PETRONAS, Perak, Malaysia, TLIF Proceeding 2021 (eISBN 978-967-2880-14-1) (pp 64-69)
J.C. Kurnia, A Ahmad, Formal And Informal Group Discussion Through Microsoft Team Channels And Breakout Rooms, International Conference on Advancing and Redesigning Education (ICARE’21) 22-24 November 2021, UniKL, Kuala Lumpur, Malaysia, ICARE’21 Proceeding (pp. 251–257)
R.Widiastuti, J. Zaini, W. Caesarendra, D.S. Laila, J.C. Kurnia, Prediction on the Indoor Thermal Comfort of Occupied Room Based on IoT Climate Measurement Open Datasets, International Conference on Informatics, Multimedia, Cyber and Information System (ICIMCIS 2020), 19-20 Nov. 2020, Jakarta, Indonesia (Proceeding published in IEEExplore (2021), pp. 40-45, doi: 10.1109/ICIMCIS51567.2020.9354277)
J.C. Kurnia, Emergency Online Teaching and Learning during Movement Control Order: Experience of Mechanical Engineering Final Year Students, Teaching and Learning Festival 2020, 8 October 2020, Universiti Teknologi PETRONAS, Perak, Malaysia, TLIF Proceeding (eISBN 978-967-2048-30-5)
N.S. Medhi, L.A.F. Haryoko and J.C. Kurnia, Numerical Investigation of Electronic Cooling with Phase Change Material, The Innovative Manufacturing, Mechatronics & Materials Forum 2020 (iM3F 2020), 6th August 2020, Virtually hosted by Universiti Malaysia Pahang (Proceeding to be published in Springer’s Lecture Notes in Mechanical Engineering (2021), doi: 10.1007/978-981-15-9505-9_40)
R.P. Dwinanda, L.A.F Haryoko, J.C. Kurnia, A. P Sasmito, The effect of epoxy and non-epoxy coating treatment on the corrosion of low carbon steel in sodium chloride solutions, The Innovative Manufacturing, Mechatronics & Materials Forum 2020 (iM3F 2020), 6th August 2020, Virtually hosted by Universiti Malaysia Pahang (Proceeding published in Proceeding published in Materials Today: Proceedings, doi: 10.1016/j.matpr.2020.07.371)
J.C. Kurnia, Using lecture capture as scaffolding for student self learning in fluid mechanics course, Teaching and Learning Festival 2019, 4 October 2019, Universiti Teknologi PETRONAS, Perak, Malaysia, TLIF Proceeding 2019 (eISBN: 978-967-2048-20-6) (pp. 32-35)
L.H. Kee, J.C. Kurnia, L.A.F Haryoko, B.W. Riyandwita, A. P Sasmito, Experimental Investigation of the Performance of Thermal Energy Storage (TES) with Embedded Phase Change Materials (PCM) as Wall Insulator, International Conference on Sustainable Energy and Green Technology 2019 (SEGT 2019) 11-14 December 2019 Bangkok, Thailand (Proceeding published in Proceeding published in IOP Conference Series: Earth and Environmental Science, 463 012139, doi: 10.1088/1755-1315/463/1/012139)
L.A.F Haryoko, J.C. Kurnia, A. P Sasmito, Forced convection boiling heat transfer inside helically coiled heat exchanger, International Conference on Sustainable Energy and Green Technology 2019 (SEGT 2019) 11-14 December 2019 Bangkok, Thailand (Proceeding published in Proceeding published in IOP Conference Series: Earth and Environmental Science, doi.10.1088/1755-1315/463/1/012030)
L.A.F Haryoko, J.C. Kurnia, A. P Sasmito, Numerical Investigation of Subcooled Boiling Heat Transfer in Helically-coiled Tube, 5th International Conference on Energy and Environment 2019 (ICEE2019) 10-11 July 2019, Bangi, Kuala Lumpur, Malaysia.
J.S. Appasamy, J.C. Kurnia, Synthesis and Evaluation of Novel TiO2-based Self-cleaning Coating Layer for Buildings, International Conference on Sustainable Energy and Green Technology 2018 (SEGT 2018). 11-14 December 2018. Kuala Lumpur, Malaysia. (Proceeding published in IOP Conference Series: Earth and Environmental Science 268 (2019) 012049 doi: 10.1088/1755-1315/268/1/012049)
J.D. Templeton, S.A. Ghoreishi-Madiseh, F.P. Hassani, A.P. Sasmito, J.C. Kurnia, Study of transient conjugate heat transfer in helical closed-loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes, International Conference on Sustainable Energy and Green Technology 2018 (SEGT 2018). 11-14 December 2018. Kuala Lumpur, Malaysia. (Proceeding published in IOP Conference Series: Earth and Environmental Science 268 (2019) 012086 doi: 10.1088/1755-1315/268/1/012086)
J.C. Kurnia, AP Sasmito, Latent Heat Thermal Capacitor in Heat Exchangers-a Computational Investigation, 10th International Conference on Applied Energy (ICAE2018), 22-25 August 2018, Hong Kong, China (Proceeding published in Energy Procedia (2019) 158, 5529-5534 doi: 10.1016/j.egypro.2019.01.591)
S.W.Y. Cheng, J.C. Kurnia, A.P. Sasmito, L.A. Lubis, The Effect of Triangular Protrusions on Geothermal Wellbore Heat Exchanger from Retrofitted Abandoned Oil Wells, 10th International Conference on Applied Energy (ICAE2018), 22-25 August 2018, Hong Kong, China (Proceeding published in Energy Procedia (2019) 158, 6061-6066 doi: 10.1016/j.egypro.2019.01.511)
M. Fong, M. Alzoubi, A.P. Sasmito, J.C. Kurnia, Performance Evaluation of Ground-Coupled Seasonal Thermal Energy Storage with High Resolution Weather Data: Case Study of Calgary Canada, 10th International Conference on Applied Energy (ICAE2018), 22-25 August 2018, Hong Kong, China (Proceeding published in Energy Procedia (2019) 158, 4980-4985 doi: 10.1016/j.egypro.2019.01.669)
J.C. Kurnia, AP Sasmito, Numerical Evaluation of Heat Transfer and Entropy Generation of Helical Tubes with Various Cross-sections under Constant Heat Flux Condition, UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) UTP Perak, UMP Pahang, Malaysia and VIT Tamil Nadu, India, September 18-19, 2018 (Proceeding published in MATEC web of conference 225 (2018) 03017 doi: 10.1051/matecconf/201822503017)
M.Z.P. Ismadi, J.C. Kurnia, S.A. Sulaiman, S. Hassan, M. Awang, P.S.S.M. Yusoff, A. Urqiua, The Need of Computer Modelling and Simulation (CMS) Competency among Employers in Malaysia, UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) UTP Perak, UMP Pahang, Malaysia and VIT Tamil Nadu, India, September 18-19, 2018 (Proceeding published in MATEC web of conference 225 (2018) 06021 doi: 10.1051/matecconf/201822506021)
K. Koh, H.H. Al-Kayiem, J.C. Kurnia, Thermal Comfort Assessment of an Office Building in Tropical Climate Condition, UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) UTP Perak, UMP Pahang, Malaysia and VIT Tamil Nadu, India, September 18-19, 2018 (Proceeding published in MATEC web of conference 225 (2018) 01003 doi: 10.1051/matecconf/201822501003)
D. Puspitasari, F.K.H. Rabie, T.L. Ginta, J.C. Kurnia, M. Mustapha, The Influence of Temperature on Stability of Aluminum Foam Cell Wall during Foaming Process, UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018) UTP Perak, UMP Pahang, Malaysia and VIT Tamil Nadu, India, September 18-19, 2018 (Proceeding published in MATEC web of conference 225 (2018) 01006 doi: 10.1051/matecconf/201822501006)
S.W.C. Cheng, J.C. Kurnia, M.S. Md Isa, S. Ashraf, Numerical investigation on the heat transfer of wellbore heat extractor, 6th International Conference on Production, Energy & Reliability (ICPER2018) 13-15 August 2018, Kuala Lumpur, Malaysia (Proceeding published in AIP Conference Proceedings 2035, 020006 (2018); doi:10.1063/1.5075554)
D.C.Y. Lim, H. H. Al-Kayiem, J.C. Kurnia, Comparison of different turbulence models in pipe flow of various reynolds numbers, 6th International Conference on Production, Energy & Reliability (ICPER2018) 13-15 August 2018, Kuala Lumpur, Malaysia (Proceeding published in AIP Conference Proceedings 2035, 020005 (2018); doi:10.1063/1.5075553)
J.C. Kurnia, A.P. Sasmito, Heat transfer performance and entropy generation of helical square tubes with various curvature radiuses, 9th International Conference on Applied Energy (ICAE 2017) 21-24 August 2017, Cardiff, UK. (Proceeding published in Energy Procedia Vol 142 , 2017, 4064-4069; doi: 10.1016/j.egypro.2017.12.326)
J.C. Kurnia, A.P. Sasmito, Numerical investigation of phase change materials thermal capacitor for pipe flow, UTP-UMP Symposium on Energy Systems (SES 2017), Seri Iskandar Perak/ Pekan Pahang, 26-27 September 2017. (Proceeding published in MATEC Web of Conferences Vol 131, 2017, 010014; doi: 10.1051/matecconf/201713101001)
M. Inayat, S.A. Sulaiman, J.C. Kurnia, Investigation on the effect of blending ratio and airflow rate on syngas profile produced from co-gasification of blended feedstock, UTP-UMP Symposium on Energy Systems (SES 2017), Seri Iskandar Perak/ Pekan Pahang, 26-27 September 2017. (Proceeding published in MATEC Web of Conferences Vol 131, 2017, 03015; doi: 10.1051/matecconf/201713103015)
M.A.H.M. Sohor, M. Mustapha, J.C. Kurnia, Silicon carbide- from synthesis to application: a review, UTP-UMP Symposium on Energy Systems (SES 2017), 26-27 September 2017Seri Iskandar Perak/ Pekan Pahang,. (Proceeding published in MATEC Web of Conferences Vol 131, 2017, 04003; doi: 10.1051/matecconf/201713104003)
J.C. Kurnia, A.P. Sasmito, Heat Transfer Performance and Entropy Generation of A Non-Circular Helical Tubes With Various Curvature Radiuses– A Numerical Investigation, UTP-UMP Symposium on Energy Systems (SES 2016), 22 November 2016, Pekan, Pahang, Malaysia.
J.C. Kurnia, A.P. Sasmito, S.I. Ping, Investigation of Heat Transfer on a Rotating Latent Heat Energy Storage, 8th International Conference on Applied Energy (ICAE 2016), 8-11 October 2016, Beijing, China (Proceeding published in Energy Procedia Vol 105C (2017) pp. 4171-4176; doi: 10.1016/j.egypro.2017.03.887)
Y. Lu, A.P. Sasmito, J.C. Kurnia, Numerical study of simultaneous methane and coal dust dispersion in a room and pillar mining face, 3rd International Symposium on Mine Safety Science and Engineering, 13-19 August 2016, Montreal, Canada. (Proceeding published in https://isms2016.proceedings.mcgill.ca/article/view/178).
J.C. Kurnia, A.P. Sasmito, M.Z. Ismadi, A.S. Mujumdar, Heat transfer performance of a non-circular coiled tubes – research summary, challenges and directions, UTP-UMP Symposium on Energy Systems (SES 2015), 7 October 2015, Bandar Seri Iskandar Malaysia. (Selected for possible publication in International Journal of Automotive and Mechanical Engineering)
J.C. Kurnia, A.P. Sasmito, S.V. Jangam, A.S. Mujumdar, Energy efficient thermal drying using impinging jet- Effect of intermittency and flipping of the substrate, 8th Asia-Pacific Drying Conference (ADC 2015) , 10-12 August 2015, Kuala Lumpur, Malaysia.
J.C. Kurnia, A.P. Sasmito, S. Akhtar, T. Shamim A.S. Mujumdar, Numerical investigation of heat transfer performance of various coiled square tubes for heat exchanger application. 7th International Conference on Applied Energy (ICAE 2015), 28-31 March 2015, Abu Dhabi, UAE. (Proceeding published in Energy Procedia vol. 75 pp. 3168-3173; doi: 10.1016/j.egypro.2015.07.655)
A.P. Sasmito, J.C. Kurnia, T. Shamim, A.S. Mujumdar, Optimization of design parameters for an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method, 7th International Conference on Applied Energy (ICAE 2015), 28-31 March 2015, Abu Dhabi, UAE. (Proceeding published in Energy Procedia vol. 75, pp. 2027-2032; doi: 10.1016/j.egypro.2015.07.267)
S. Akhtar, M. Khan, J.C. Kurnia, T. Shamim, Numerical Investigation of H2-air Premixed Combustion in a Curved Micro-Combustor for Thermo-photovoltaic (TPV) Applications, 7th International Conference on Applied Energy (ICAE 2015), 28-31 March 2015, Abu Dhabi, UAE. (Proceeding published in Energy Procedia vol. 75, pp. 47-57; doi: 10.1016/j.egypro.2015.07.626)
S.V. Jangam, A.P. Sasmito, J.C. Kurnia,A.S. Mujumdar, Research project based learning (RPBL) in higher education, 7th International Conference on Teaching and Learning in Higher Education (TLHE), Singapore, 9-11 December 2014.
S. Akhtar, J.C. Kurnia, M. N. Khan, T. Shamim, A Three-Dimensional Computational Model of H2-Air Premixed Combustion in a Circular Micro-channel for Thermo-photovoltaic (TPV) Application, 12th International Conference of Numerical Analysis and Applied Mathematics (ICNAAM 2014), 22-28 September 2014, Rhodes, Greece (Proceeding published in AIP Conference proceedings 1648, 850098 doi: 10.1063/1.4913153)
J.C. Kurnia, I. Ben Salem, H. Nadeem, T. Shamim, M. Sassi, Numerical Investigation of Multiphase Flow Hydrodynamics in Trickle Bed Reactors, ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting, August 3-7, 2014, Chicago, Illinois, USA. (Proceeding published in Proceedings series: Fluids Engineering Division Summer Meeting; doi: 10.1115/FEDSM2014-22152)
H. Nadeem, I. Ben Salem, J.C. Kurnia, S. Rabbani, T. Shamim, M. Sassi, 2014, Experimental and Computational Study of Multiphase Flow Hydrodynamics in 2D Trickle Bed Reactors, AGU Fall Meeting, 15-19 December 2014, San Fransisco, USA. (Proceeding published in https://ui.adsabs.harvard.edu/abs/2014AGUFM.H43M1144N/abstract)
S. Rabbani, I. Ben Salem, H. Nadeem, J.C. Kurnia, T. Shamim, M. Sassi, Experimental and Computational Study of the Hydrodynamics of Trickle Bed Flow Reactor Operating Under Different Pressure Conditions, AGU Fall Meeting, 15-19 December 2014, San Fransisco, USA. (Proceeding published in https://ui.adsabs.harvard.edu/abs/2014AGUFM.H43M1151R/abstract)
J.C. Kurnia, A.S. Mujumdar, 2013, Implementation of a Hybrid Brattice to Control Dust Dispersion in Underground Coal Mine Faces, 24th World Mining Congress, 11-15 August 2013, Montreal, Canada.
J.C. Kurnia, A.S. Mujumdar, Simulation of Methane Distribution and Ventilation in Underground Mines: Potential for a Novel Intermittent Airflow System, 24th World Mining Congress, 11-15 August 2013, Montreal, Canada.
A.P. Sasmito, J.C. Kurnia, A.S. Mujumdar, Computational Fluid Dynamics Application For Thermal Management In Underground Mines, 24th World Mining Congress, 11-15 August 2013, Montreal, Canada.
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, Improved Design for Heat Transfer Performance of a Novel Phase Change Material (PCM) Thermal Energy Storage (TES), 4th Sriwijaya International Seminar on Energy Science and Technology (SISEST 2011), 5-6 October 2011, Palembang Indonesia.
J.C. Kurnia, A.P. Sasmito, S.V. Jangam, A.S. Mujumdar, Model for Drying of Thin Slabs Using Pulsed Turbulent Impinging Jets, 7th Asia-Pacific Drying Conference (ADC 2011), 18-20 September 2011, Tianjin, China.
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, Evaluation of heat transfer performance of helical coils of non-circular tubes, International Symposium on Innovative Materials for Processes in Energy System (IMPRES 2010), 29 November – 1 December 2010, Singapore. (doi: 10.3850/978-981-08-7614-2_IMPRES010)
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, Convective heat transfer in coils of non-circular cross-sections: CFD study of laminar heat transfer enhancement relative to straight pipes, 3rdSriwijaya International Seminar on Energy Science and Technology (SISEST 2010) 3-4 November 2010, Palembang Indonesia.
J.C. Kurnia, A.P. Sasmito, A.S. Mujumdar, Computational Study of Energy-Efficient Thermal Drying Using Intermittent Impinging Jets, 8th ASEAN ANSYS Conference 2010, 12-13 October 2010, Singapore.
J.C. Kurnia, E. Birgersson, and A.S. Mujumdar, Analysis of Polyelectrolyte Temperature Sensitive Hydrogels, Regional Conference on Mechanical and Aerospace Technology (RC-MeAe 2010), 9 – 10 Februari 2010, Bali, Indonesia.
J.C. Kurnia, E. Birgersson, and A.S. Mujumdar, Study of Thermo-Sensitive Hydrogels for Microfluidic Flow Control. 216th ECS meeting 2009 Vienna, Austria.
J.C. Kurnia, E. Birgersson, A.S. Mujumdar, A Reduced Model for pH-Sensitive Hydrogels, International Conference on Material for Advanced Technologies (ICMAT) 2009 Singapore.
J.C. Kurnia, E. Birgersson, A.S. Mujumdar, L.C. Quah, Mathematical Modeling of Hydrogels for Microfluidic Flow Control, International Conference on Material for Advanced Technologies (ICMAT) 2009 Singapore.
J.C. Kurnia, E. Birgersson, A.S. Mujumdar, Heat and mass transfer in gels, Workshop on Mathematical Modeling in Minerals, Metals and Materials Processing, 14 March 2009, Singapore.

Invited speakers

Solar Thermal and Geothermal Energy Extraction, December 2022, The 3rd International Science and Technology Fair (INSITEF 2022)
Geothermal Energy Extraction, 1st International Conference on Civil and Mining Engineering (ICCME 2022)
Coaching Clinic for Writing and Publication Activities of Reputable International Journals, Universitas Esa Unggul, 2022
Computational Application of Fluid Dynamics in the Development of Thermal and Renewable Energy Systems, September 2020, Physics Engineering Vocational Agency, Indonesian Engineers Association.
Fuel Cell Electric Vehicle Future Vehicle Development, Chemical Engineering Webinar, August 2020, Kalimantan Institute of Technology, Indonesia.
Innovation of Renewable Alternative Energy Sources: Biofuel Production from Waste Palm Oil and Palm Oil, National Webinar on “Innovation & Sustainability: Regional Strategies in Managing Comparative Resources Today, Tomorrow and in the Future, August 2020, Labuhan Batu University, North Sumatra , Indonesia
Convective Thermal Drying Utilizing Intermittent and Pulsating Impinging Jet, International Conference on Agricultural Technology and Engineering, and Environmental Sciences (ICATES), August 2019, Banda Aceh, Indonesia

Research and consultancy grants

a. Research grants

J.C. Kurnia, M.F.Muhammad, F.S. Maung, Firmansyah (1 Dec 2020 – 30 Nov 2022), Investigation of Flow Profile and Power Generation in a Novel Gas Impulse Turbine, PETRONAS Research Sdn Bhd (PRSB CS: E.025.JRD.02020.004; UTP CS: 015MD0-067), MYR 96,452.40. (Principal Investigator)
J.C. Kurnia, A.P. Sasmito, M. Mustapha, M.Z.P. Ismadi, (17 Feb 2020 – 16 Feb 2023) Pore-scale modeling of flow boiling heat transfer in metal foam heat exchanger, Yayasan UTP Fundamental Research Grant (UTP CS: 015LC0-214), MYR 130,000. (Principal Investigator)
JC Kurnia, S.A. Sulaiman, (15 Jan 2020 – 14 Jan 2023), MARE: Marine Coastal and Delta Sustainability for Southeast Asia, Erasmus + Capacity Building (Project No. 610327-EPP-1-2019-1-DE-EPPKA2-CBHE-JP; UTP CS: 015ME0-142; Total grant: EUR 69.995,00), MYR 10,000. (Co-Principal Investigator)
J.C. Kurnia, HH Kayiem, AT Baheta, M Mustapha, M.Z. Ismadi, KV Sharma (01 01 Jan 2019 – 30 Sep 2021) Investigation of convection flow pattern and heat transfer in density gradient nanofluid solar pond, Ministry of Higher Education (MOHE) Fundamental Research Grant Scheme (FRGS/1/2018/TK07/UTP/02/8; UTP CS: 015MA0-028), MYR 52,800.00 (Principal Investigator)
JC Kurnia (01 Mar 2019- 28 Feb 2020), Investigation Of The Performance Of Thermal Energy Storage (TES) With Embedded Phase Change Materials (PCM) as Wall Insulator And Energy Storage Medium, International UP-UTP Collaborative Research Project (015ME0-082), USD 6,000. (Principal Investigator)
J.C. Kurnia, L.A. Lubis, M.Z. Ismadi, S.A. Sulaiman, H.H. Kayiem, (1 Nov 2016 – 31 Oct 2019) Numerical investigation of heat transfer enhancement on geothermal energy extraction from abandoned oil well, Yayasan UTP Fundamental Research Grant (0153AA-E64), MYR 97,900. (Principal Investigator)
JC Kurnia, S.A. Sulaiman, (15 Oct 2016 – 14 Oct 2019) Innovative Teaching and learning strategies in open modeling and simulation environment for student centered engineering education, Erasmus + Capacity Building (Project No. 573751-EPP-1-2016-1-DE-EPPKA2-CBHE-JP; UTP CS: 0153AB-M27-3; Total grant: EUR 105.261,00), MYR 20,000. (Co-Principal Investigator)
JC Kurnia, (1 Oct 2017 – 30 March 2019) Implementation of Blended Learning and Virtual Experiment Using Computational Fluid Dynamics Tools on Fluid Mechanics II Course. UTP Scholarly on Teaching and Learning (SoTL) Grant, MYR 20,000. (Principal Investigator)
J.C. Kurnia, M.Z. Ismadi, Z.A. Abdul Karim, (1 May 2015 – 30 Apr 2016), Improved heat transfer performance of a novel rotating phase change materials (PCM) based thermal energy storage (TES). Universiti Teknologi PETRONAS: Short-term Internal Research Fund (0153AA-D55), MYR 25,000. (Principal Investigator)

b. Consultancy grants

J.C. Kurnia, AA Mokhtar (2 Sep 2021 – 14 Jan 2022) , CFD Study for Multiphase Flow Behavior in MRCSB CFU and SGCU Overhead System, PETRONAS Technical Services Sdn Bhd (PTSSB/SA/2020-03/ITPSB; UTP CS: 015QB0-110), MYR 211,481.66
M.A.M.Said, J.C. Kurnia (14 Nov 2022 – 16 Dec 2022) CFD Analysis for Pressure Drop Investigation on New CAMFIL Filter, Camfil Malaysia Sdn Bhd (UTP CS: 015QB0-182), MYR 20,171.80

Supervision

a. Postgraduate

11 MSc students (6 main supervisor, 5 co-supervisor)
3 PhD students (3 co-supervisor)

b. Undergraduate

66 FYP (UG Thesis) (36 main supervisor, 18 FYP co-supervisor, 12 mentor)

Professional activities

Head, Green Hydrogen Technology Center (Previously Solar Thermal Advanced Research Center) (2022)
Deputy Head, Solar Thermal Advanced Research Center (2019-2021)
Final year project (FYP) coordinator (2018-2022)
Mechanical engineering student clubs advisor (2018-2022)
Cluster leader on project based courses (2017-2020)
Member of university committee on student development framework (2018-2019)
Committee member for business process improvement award UTP Quality Day (2018 and 2019)
Committee on faculty engineering appreciation day (FEAD 2017)
Leader of Department ecosystem unit (2016-2019)
Member of Department OBE task force (2015-2016)
Member of Department Post-graduate task force (2015-2016)
Leader of Department event management committee (2016-2019)
Chief/Deputy chief for university final examination (2015-2022)
Advisory board member, Engineering Physics Program, Bandung Institute of Technology (Bandung Institute of Technology) Bandung City, West Java 40132, Indonesia (2020-2025)
Advisory board member, International Symposium on Advances and Innovation in Mechanical Engineering (ISAIME) 2021, 2022
Visiting Professor, North China University of Water Resources and Electric Power, Zhengzhou, Henan Province, China, July 2019
Technical committee (Uevent), International Conference on Renewable Energy and E-mobility (ICREEM2022), Kuching, Sarawak, 1 – 2 December 2022
Moderator Panel Session 1 and proceeding guest editor, The 6th ASTECHNOVA International Energy Conference, Yogyakarta, 24-25 August 2021.
Technical committee, 7th International Conference on Production, Energy and Reliability (ICPER 2020) Kuching, Sarawak, 14-16 July 2021.
Event organizer committee, UTP-UMP-UAF Symposium on Energy System (SES 2019), UTP Seri Iskandar/UMP Pekan/ UAF Pakistan, 1-2 October 2019.
Head, IT and Media committee, 6th International Conference on Production, Energy and Reliability (ICPER2018), Kuala Lumpur, Malaysia, 13-14 August 2018.
Event organizer committee, UTP-UMP-VIT Symposium on Energy System (SES 2018), UTP Seri Iskandar/UMP Pekan/VIT India, 18-19 September 2018.
Secretary, UTP-UMP Symposium on Energy System (SES 2017), UTP Seri Iskandar/UMP Week, 26-27 September 2017.
Secretary, UTP-UMP Symposium on Energy System (SES 2016), Universiti Malaysia Pahang, 21 September 2016.
Head of technical committee, UTP-UMP Symposium on Energy System (SES 2015), Universiti Teknologi PETRONAS, 7 October 2015
Session chair-person, 8th Asia-Pacific Drying Conference (ADC 2015), Kuala Lumpur, Malaysia, 10-12 August 2015.
IT and Media committee, 5th International Conference on Production, Energy and Reliability (ICPER2016), Kuala Lumpur, Malaysia, 15-17 August 2016
Committee, UTP-UMP Symposium on Energy System (SES 2016), Universiti Malaysia Pahang, Pekan, Pahang, Malaysia, 22 September 2016

Professional associations

Chartered Engineer (CEng), Institution of Mechanical Engineers (CEng Reg. No. 636306, IMechE Membership No. 80303415)
Professional Technologist (P.Tech), Malaysia Board of Technologist (Reg no PT20050246)
Senior Professional Engineer, Indonesian Engineers Association (The Institution of Engineers Indonesia) (Certification number: 2-03-00-000075-00, IEI Membership no 1310.03.040734)
ASEAN Engineer (Reg. No. AE 12013)

Tian Fung Wang

MBA, BE (Mech), ACPE, P.Eng. (Mech), ASEAN Eng., Steam Engr., PMP, MIEM, REEM
Adjunct Lecturer, Mechanical & Mechatronic Engineering Department

Location: Skylark 3
Tel: +60 85 630100
Email: tianfungwang@curtin.edu.my

Research interests

Heat transfer
Waste management
Waste to energy power plant

Professional experience

Completed 1^st Waste to Energy Power Plant at Surabaya, 2020
Completed 1^st Hazardous Waste to Energy Power Plant in Malaysia, 2018
Completed 1^st Waste to Energy Power Plant at Thailand, 2015
Green Building & Energy Saving project for Malaysia Prime Minister Office, 2012
Power Plant erection at Brunei Shell LNG, 2008

Professional association

Member of The Institution of Engineers Malaysia

Fethma M Nor

PhD, MEng, BEng (Hons), P.Tech, MBOT, MIOMM, MIMMM
Senior Lecturer, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 454
Tel: +60 85 630100 Ext:2526
Email: fethma@curtin.edu.my

Research profiles

Google Scholar: https://scholar.google.com/citations?user=zLJdIFgAAAAJ&hl=en
Publons: https://www.webofscience.com/wos/author/record/1167967
SCOPUS: https://www.scopus.com/authid/detail.uri?authorId=26423207200
ORCID: https://orcid.org/0000-0001-5430-7866

Awards

Gold Medal, International Innovation Association for Researcher of Skills and Vocational Training (ARSVOT) Malaysia 2024 (IAM2024).
Editor’s Choice, Article (Vol. 1, No. 1), Semarak International Journal of Creative Art and Design (2024)
Best Animation Video, Mechanical Capstone Design Project Competition 2024
Best Novelty Design, Mechanical Capstone Design Project Competition 2024
Favourite Design by Visitors’ Vote, Mechanical Capstone Design Project Competition 2025

Academic history

Doctoral Degree in Mechanical Engineering (Production Process Design), Dongguk University, South Korea (2012)
Master Degree in Engineering (Mechanical), Universiti Teknologi Malaysia, Malaysia (2009)
Bachelor Degree in Engineering (Mechanical), Universiti Tun Hussein Onn Malaysia, Malaysia (2004)

Research interest

Finite Element Analysis (FEA) & Computational Solid Mechanics
Material Science: Natural Fiber Composites and Biomaterials
Human-Centered Biomechanics: Bone tissue engineering, Dental implants, Skin Biomechanics
Product Design & Development: (Biomechanical Devices, Military Safety Equipment, Agriculture, Kids Development Toys, Partition Building, etc.)

Selected publications

H. Zamri, N.A. Sukindar, F.M. Nor, M.A.A. Ismail, B.L Lim and A.A.A. Aziz (2024) Dynamic Folding Envelope Design, Semarak International Journal of Creative Art and Design, Volume 1, Issue 1, 14-23
T. Hamdani, N.A. Sukindar and F.M. Nor (2024) Tiga-ponics – A New Farming System That Combines Hydroponic, Aquaponic, and Aeroponics Methods for Growing Vegetables, Semarak International Journal of Creative Art and Design, Volume 1, Issue 1, 24-35
Y. Chong, N.A. Fadil, F.M. Nor, and T. A. Abu Bakar (2024) Effect of Applied Voltage on Electrophoretic Deposition of Nano-Hydroxyapatite Coating on Biodegradable Az31 Magnesium Alloy and Its Corrosion Properties, Journal of Advanced Manufacturing Technology (JAMT), Volume 18, Issue 3, 179-192
FM Nor, ZS Teh, D Kurniawan (2023) Finite element analysis on the mechanical performance of amalgam, gold, and bioglass dental filling materials in molar tooth. Materials Today: Proceedings.
AYM Koh, FM Nor, S Ramesh, D Kurniawan (2023) Plasticisers for edible packaging made of thermoplastic sago starch. Materials Today: Proceedings.
MH Ahat, FM Nor, S Ramesh, D Kurniawan (2023) Perforation Size Effect on Lotus Leaf Based Oil/Water Separator. Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering: ICAMME 2022, 579-584
TC Wahyudi, T Tarkono, I Sukmana, F Ibrahim, Y Burhanuddin, FM Nor (2022) The Effect of Squeeze Casting Process on Mechanical and Micro-structural Properties of Magnesium AZ31. International Journal of Aviation Science and Engineering (AVIA), Volume 4, Issue 1, 1-9
RWC Mook, SR Ya’akub, F.M Nor, D Kurniawan (2022) Hydrophobic Coating of Plywood Using Natural Oils and Waxes. Global Congress on Manufacturing and Management, 169-179
CH Kua, NAA Yunos, R Petra, F.M Nor, D Kurniawan (2022) Design and Fabrication of Laboratory Scale Carbon Dioxide Controlling Chamber for Leafy Vegetables. Global Congress on Manufacturing and Management, 45-56
AW Pai, K Senawing, F.M Nor (2021) Design and Evaluation of Livestock Feed Chopper Machine. Journal of Applied Science, Engineering and Technology 1:1, 14-17
LF Zakaria, H Mudin, F.M Nor (2021) Modified Thermoelectric Coolers (TEC) Peltier Plate for Outdoor Activities with Rechargeable Battery using Solar Panel. Journal of Applied Science, Engineering and Technology 1:1, 18-21
H Mudin, C Bagu, F.M Nor (2021) Design of Modified Chicken Feather Retractor Machine. Journal of Applied Science, Engineering and Technology 1:2, 44-48
C Bagu, H Mudin, F.M Nor (2021) Design and Development an Ergonomic Transfer Lifter Assistor from Wheelchair to Bed Transfer for Patients Under 50kg. Journal of Engineering and Scientific Research (JESR) 3:2, 47-50
41. I Rosmanizan, F.M Nor (2021) Design and Fabrication of Plastic Compressor Machine for Plastic Waste. Journal of Applied Science, Engineering and Technology 1:2, 68-72
R. Nur, M. Y. Noordin, S. Izman, F.M Nor and Kurniawan D (2021) Determination of Energy Consumption during Turning of Hardened Stainless Steel using Cutting Force. Metals. 11: 565. [Q1, Impact Factor: 2.117]
A. Abdelrhman, Y. Lim, Y. Ali, I. Ahmad, C. Georgantopoulou, F.M. Nor, Kurniawan, D (2020) Diagnosis Model for Bearing Faults in Rotating Machinery by using Vibration Signals and Binary Logistic Regression. AIP Conference Proceedings. 2262: 030014 [ISI indexed]
F.M. Nor, M.A. Sidek, D.P.B. Aji, Kurniawan, D (2020) Finite Element Analysis of Multidirectional Forging Dies for Severe Plastic Deformation of Magnesium Alloy. AIP Conference Proceedings. 2262: 030019 [ISI indexed]
F.M. Nor, N. Osman, Kurniawan, D (2020) Finite Element Analysis of Repetitive Corrugation and Straightening Die Designs for Severe Plastic Deformation of Magnesium Alloy. AIP Conference Proceedings. 2262: 030017 [ISI indexed]
F.M. Nor, A.L.M. Isa, Z. Zulkipli, D.P.B. Aji, Kurniawan, D (2020) Effect of Cooling Rate and Aging Duration on Microstructure of Tin-Copper Solder Joint. AIP Conference Proceedings. 2262: 070004 [ISI indexed]
S. Desmond, D. Kurniawan, F.M. Nor (2020) Synthesis of hydroxyapatite from seashells via calcination at various temperature using microwave and furnace. AIP Conference Proceedings. 2217: 020010 [ISI indexed]
Z. Kwan, N.N.K. Najhan, Y.H. Yau, Y. Luximon, F.M. Nor (2020) Anticipating Local Flaps Closed-Form Solution On 3d Face Models Using Finite Element Method. International Journal for Numerical Methods in Biomedical Engineering. 36 (11) E3390. [Q2, Impact Factor: 2.097]
F.M. Nor, J.Y Lim, M.N Tamin, H.Y Lee, Kurniawan, D. (2020) Effects of Starter Defect to Energy Release Rate of Three Point End Notch Flexure Tested Unidirectional Carbon Fiber Reinforced Polymer Composite. Polymers. 12: 904-916. [Q1, Impact Factor: 3.426]
Hii, V.Y.M., Nor, F.M., Kurniawan, D. (2019) Scylla Serrata Shells Calcination Using Electric Furnace and Microwave Kiln. International Journal of Engineering and Advanced Technology. 8: 500-504. [ISI indexed].
A.Z. Sultan, S. Sharif, F.M. Nor, D. Kurniawan, (2019) Minimum Quantity of Lubricant Drilling of Stainless Steel using Refined Palm Olein: Effect of Coating Tool on Surface Roughness and Tool Wear. Procedia Manufacturing, 30: 427-434 [ISI indexed].
M. J. Hisam, I. Zaman, S. Sharif, D. Kurniawan, F.M. Nor (2019) Finite Element Analysis of Mini Implant Biomechanics on Peri-Implant Bone. Procedia Manufacturing, 30: 308-314 [ISI indexed].
Hisam, M.J., Sharif, S., Suhaimi, M.A., Kurniawan, D., Nor, F.M., Shayfull, Z. (2019) Periimplant bone biomechanics featuring short implant design. AIP Conference Proceedings. 2129: 020059 [ISI indexed]
H. Osman, F.M. Nor, Y.M. Hamdan, M.N. Tamin (2017) Creep Ruptures of AISI 347 Austenitic Stainless-Steel Foils at Elevated Temperature of 750℃. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 231 (6): 516–522. [Q2, Impact Factor: 1.625]
F.M. Nor, H.Y. Lee, J.Y. Lim, D. Kurniawan (2016) Strain Rate and Temperature Effects on Elastic Properties of Polycaprolactone/Starch Composite. e-Polymers. 16 (3): 217–223. [Q2, Impact Factor: 0.569]
I. Zaman, F.M. Nor, B. Manshoor, A. Khalid, S. Araby (2015) Influence of Interface on Epoxy/Clay Nanocomposites: 2. Mechanical and Thermal Dynamic Properties. Procedia Manufacturing. 2: 23–27. [ISI indexed]
I. Zaman, F.M. Nor, B. Manshoor, A. Khalid, S. Araby (2015) Influence of interface on Epoxy/Clay Nanocomposites: 1. Morphology Structure. Procedia Manufacturing. 2: 17–22. [ISI indexed]
M. H. M. Samsudin, D. Kurniawan, F.M. Nor, (2015) Strain Distribution Equal Channel Angular Pressing of Magnesium alloy at 90° and 120° Corner Angles. Procedia Manufacturing. 2: 230–235. [ISI indexed]
W.Z.W. Zahari, R. Badri, H. Ardyananta, D. Kurniawan, F.M. Nor (2015) Mechanical Properties and Water Absorption Behavior of Polypropylene / Ijuk Fiber Composite by Using Silane Treatment. Procedia Manufacturing. 2: 573–578. [ISI indexed]
M. J. Hisam, J.Y. Lim, F.M. Nor, D. Kurniawan (2015) Stress Distribution Due to Loading on Premolar Teeth Implant: A Three-Dimensional Finite Element Analysis. Procedia Manufacturing. 2: 218–223. [ISI indexed]
W. Khoo, F.M. Nor, H. Ardyananta, D. Kurniawan (2015) Preparation of Natural Hydroxyapatite from Bovine Femur Bones Using Calcination at Various Temperatures. Procedia Manufacturing. 2: 196-201. [ISI indexed]
M. A. M. Soliheen, D. Kurniawan, F.M. Nor, (2015) Stress Distribution between Bonding Surface of Dental Filling in Enamel and Dentine. Procedia Manufacturing. 2: 212–217. [ISI indexed]
F.M. Nor, H.Y. Lee, J.Y. Lim, M.N. Tamin, D. Kurniawan, (2014) Effect of Starter Defect to GIIC of Unidirectional CFRP Composite. Applied Mechanics and Materials. 493: 773776. [Scopus indexed]
F. Najarian, M.Y. Noordin, F.M. Nor, D. Kurniawan (2014) Analysis of Deep Hole Drilling In Presence of Electromagnetic Field Using Taguchi Technique. American Society of Mechanical Engineers. 46445: V02BT02A060 [ISI indexed].
M.H.S. Elmunafi, M.Y. Noordin, F.M. Nor, D. Kurniawan (2014) Turning of Hardened Martensitic Stainless Steel with Minimum Quantity of Lubricant using Castor Oil. Proceedings of the International Symposium on Green Manufacturing and Applications (ISGMA 2014), June 24-28, Busan, Korea.
F.M. Nor, D. Kurniawan, Y.J. Quan, J.Y. Lim (2013) Load Transfer Analysis on Jawbone Implanted with Fixture Having High Surface Area. Proceedings of the 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2013), Dec 46, Johor Bahru, Malaysia.
H. Osman, F.M. Nor, A. Borhana, (2013) Creep ruptures property of Austenitic Stainless-Steel Foils at Elevated Temperature levels (750o C). Proceedings of the 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2013), Dec 4-6, Johor Bahru, Malaysia.
F.M. Nor, H.Y. Lee, J.Y. Lim, M.N. Tamin, D. Kurniawan (2013) Effect of Starter Defect to GIIC of Unidirectional CFRP Composite. International Conference on Mechanical Engineering (ICOME 2013), Sept 12-14, Lombok, Indonesia.
F.M. Nor, H.Y. Lee, J.Y. Lim, M.N Tamin. (2013) Effects of Starter Defect to Energy Release Rate of Three Point End Notch Flexure Tested Unidirectional CFRP. 9th International Conference on Fracture & Strength of Solids. June 9-13, Jeju, Korea.
F.M. Nor, D. Kurniawan, H.Y. Lee, J.Y. Lim, J.Y. (2012) Polycaprolactone/Starch Blends with Corn Based Coupling Agent: Physical Properties and In Vitro Analysis. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 226: 693 – 698. [Q2, Impact Factor: 1.208]
D. Kurniawan, F.M. Nor, H.Y. Lee, J.Y. Lim (2012) Finite Element Analysis of Bone–Implant Biomechanics: Refinement through Featuring Various Osseointegration Conditions. International Journal of Oral & Maxillofacial Surgery. 41: 1090-1096. [Q1, Impact Factor: 1.506]
F.M. Nor, D. Kurniawan, H.Y. Lee, J.Y. Lim (2012) Effect of Strain Rate and Temperature on Elastic Properties of PCL/Starch. Proceedings of the 8th Asian-Australasian Conference on Composite Materials. November 6-8. Kuala Lumpur, Malaysia: Asian-Australasian Committee on Composite Materials. [ISI indexed]
D. Kurniawan, F.M. Nor, H.Y. Lee, J.Y. Lim (2011) Elastic Properties of Polycaprolactone at Small Strains are Significantly Affected by Strain Rate and Temperature. Proceedings of the Institution of Mechanical Engineers, Part H, Journal of Engineering in Medicine. 225: 1015-1020. [Q2, Impact Factor: 1.208]
F.M. Nor, D. Kurniawan, Y.K. Seo, J.K. Park, S.A. Park, W.D. Kim, H.Y. Lee, J.Y. Lim (2011) Fabrication and Physical Properties of Polycaprolactone/Starch Blends with Corn Based Coupling Agent. Proceedings of the 18th International Conference on Composite Materials. August 21-26. ICC Jeju, Korea: Korean Society of Composite Materials. [Scopus indexed]
M.N. Tamin, F.M. Nor, L.W. Keat, (2010) Hybrid Experimental-Computational Approach for Solder/ Intermetallic Interface Shear Strength Determination in Tin-Lead Solder Joints. IEEE Transaction on Component and Packaging Technologies. 33: 614- 620. [Q2, Impact Factor: 2.31]
D. Kurniawan, F.M. Nor, H.Y. Lee, J.Y. Lim (2010) Periimplant Bone Biomechanics: Finite Element Analysis for Partial Osseointegration. Proceedings of the KSME 2010 Fall Annual Meeting. November 3-5. ICC Jeju, Korea: Korean Society of Mechanical Engineers, 41224125.
F.M. Nor, D. Kurniawan, H.Y. Lee, J.Y. Lim (2010) Finite Element Analysis of Acupuncture Needle Insertion: Skin’s Elastic Response. Proceedings of the KSME 2010 Fall Annual Meeting. November 3-5. ICC Jeju, Korea: Korean Society of Mechanical Engineers, 4108-4110.
F.M. Nor, W.K. Loh, N. Kamsah, M.N. Tamin (2008) Damage Mechanics Model for Interface Fracture Process in Solder Interconnects. Proceedings of the 10th Electronics Packaging Technology Conf. (EPTC), IEEE Xplore. 821-827 [Scopus indexed]
M.N. Tamin, N. Kamsah, F.M. Nor (2008) Modeling the Mechanics of Solder/ Intermetallic Interface Fracture Process in Solder Interconnects. 2nd South East Asia Abaqus Regional Users’ Conference. Nov 10-11. Bangkok, Thailand.
M.N. Tamin, N. Kamsah, Y.B. Liew, F.M. Nor (2007) Fatigue Lives of Solder Joints Subjected to Accelerated Temperature and Mechanical Load Cycles. South East Asia Abaqus Users’ Conference. Oct 29-30. Kuala Lumpur, Malaysia.
M.N. Tamin, F.M. Nor (2007) Hybrid Experimental-Computational Approach for Solder/Intermetallic Interface Shear Strength Determination in Tin-Lead Solder Joints. Int. Conf. Advanced Computational Engineering and Experimenting (ACE-X). July 12-13. Algarve, Portugal.

Invited speakers

Invited Speaker, 11th International Conference on Green Composites, Changwon National University, South Korea, November 4, 2022.
Keynote Speaker, 8th International Conference on Science, Technology, and Interdisciplinary Research (IC–STAR UNILA 2022), Faculty of Engineering, Universitas Lampung, Indonesia, September 27, 2022.
Guest Lecture, Professional Engineering Practice (Leadership), Curtin University Malaysia, Malaysia, October 28, 2021.
Invited Speaker, 5th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering (ICIMECE 2019), Alana Hotel & Convention Center, Solo, Indonesia, September 17-18, 2019.
Guest Speaker, International Forum on Advanced Technologies (IFAT2015), Tokushima University, Japan, March 9, 2015.
Invited Speaker, International Academic Cooperation Expert Seminar, Department of Mechanical Engineering, Changwon National University, South Korea, February 10, 2014.

Research funding and research projects

Feb 2025 – Present : Member, Curtin Malaysia Teaching Innovation Project (CMTIP), Improving Teaching of Configuration Design of Parts in MCEN4011 through Experiential Learning (10 months).
March 2024 – Present : Member, Internal Research Grant, Universiti Teknologi Brunei, EcoFilM (Ecofriendly Filter of Microplastics): Advancing Plant-Based Oil/Water Filtration for Microplastic Reduction in Marine and Freshwater Ecosystems (10 months).
March 2024 – Present : Member, Special Research Grant, Universiti Teknologi Brunei, Novel 3D printer filaments made from polymeric biocomposite reinforced by nanocrystalline cellulose derived from Brunei native wood (10 months).
March 2024 – Dec 2024 : Member, Curtin Malaysia Teaching Support (CMTS), Implementation of a preretrieval practice to support the pedagogy approach in a first-year engineering course (10 months).
Apr 2021 – October 2022 : Collaborator, UTB Internal Research Grant, Development and analysis of Digital Image Correlation for strain measurement in mechanical properties testing of materials (18 months).
Dec 2018 – Dec 2020 : Project Leader, Sarawak Digital Economy Research Grant (by Sarawak Multimedia Authority), MySaBRIX: App based Brix refractometer to measure brix index of fruits and vegetables in Sarawak. Vot 1076 (24 months) in Curtin University Malaysia. RM 150,000.
Dec 2018 – Dec 2023 : Project Leader, Global Congress on Manufacturing and Management –GCMM, by Sarawak Convention Bureau, (48 months). RM132, 000.
Oct 2018 – Dec 2020 : Member, Demand-Driven Innovation Project by Public-Private Research Network (PPRN), Microwave Kiln for Beads Production (6 months) in Curtin University Malaysia. RM 31,200.
Jul 2014 – Jul 2016 : Project Leader, Fundamental Research Grant Scheme (by MoHE Malaysia), Finite element analysis of bone-implant biomechanics featuring various osseointegration conditions due to high cycle fatigue loading. Vot 1464 (24 months) in UTHM. RM 78,200.
Dec 2013 – Dec 2015 : Member, Fundamental Research Grant Scheme (by MoHE Malaysia), Towards achieving ductile mode machining of bones through ultraprecision turning process. Vot 4F285 (24 months) in UTM. RM 120,500.
Sep 2013 – Mar 2015 : Project Leader, Short Term Research Grant (by UTHM), Finite element analysis of bone-implant biomechanics featuring various osseointegration conditions. Vot 1288 (18 months) in UTHM. RM10,000.
May 2014 – Oct 2015 : Project Leader, Postgraduate Researcher Incentive Grant (by UTHM), Improvement in mechanical properties of polypropylene (PP)/ramie green composite using maleic anhydride (MA) and silane treatment. VotU041 (18 months) in UTHM. RM 19,500.
May 2014 – Oct 2015 : Project Leader, Postgraduate Researcher Incentive Grant (by UTHM), Finite element analysis of bone-implant biomechanics featuring various osseointegration conditions due to high cycle fatigue loading. Vot U043 (18 months) in UTHM. RM 19,500.
Oct 2014 – Mar 2016 : Project Leader, Postgraduate Researcher Incentive Grant (by UTHM), Improvement in mechanical properties of polypropylene (PP)/ijuk green composite using maleic anhydride (MA) and silane treatment. Vot U180 (18 months) in UTHM. RM 19,500.
Oct 2014 – Mar 2016 : Project Leader, Postgraduate Researcher Incentive Grant (by UTHM), Crack initiation and propagation of dental filling using finite element analysis. Vot U181 (18 months) in UTHM. RM 19,500.

Professional activities

a. Journal editorship and reviewing

Editor, Advances in Manufacturing Processes and Smart Manufacturing Systems Vol. 1214. (2024) (Scopus indexed)
Editor, Advances in Manufacturing Processes and Smart Manufacturing Systems Vol. 1215. (2024) (Scopus indexed)
Editorial Board Member, Advances in Mechanical Engineering (Q3, IF: 1.161) (Apr 2021 – present)
Guest Editor, Journal of Applied Science and Engineering Vol. 24. (2021) (Q3, ISI indexed)
Guest Editor, AIP Conference Series, Vol. 2262 (2020) (ISI indexed)
Guest Editor, AIP Conference Series, Vol. 1902 (2017) (ISI indexed)
Guest Editor, Applied Mechanics and Materials, Vol. 735 (2015)
Guest Editor, Applied Mechanics and Materials, Vol. 606 (2014) (Scopus indexed)
Reviewer, Polymers, (Q1, IF 3.426)
Reviewer, Journal of Materials: Design and Applications (Q2, IF: 1.625)
Reviewer, Procedia CIRP (Scopus indexed)
Reviewer, Advances in Mechanical Engineering (Q3, IF: 1.161)
Reviewer, International Journal of Oral & Maxillofacial Implants (Q1, IF: 2.320)
Reviewer, Engineering Journal (Q2, IF: 0.228)
Reviewer, Journal of Mechanics in Medicine and Biology (JMMB) (Q1, IF: 0.883)
Reviewer, International Journal of Plant & Soil Science
Reviewer, International Journal of Environment and Climate Change
Reviewer, Journal of Applied Bionics and Biomechanics (Q3, IF: 1.92)
Reviewer, Malaysian Journal of Fundamental and Applied Sciences, (Q4, IF: 0.6)
Reviewer, Advanced Mechanical and Mechatronic System (AMMS) Journal

b. International appointments/committees

Co-Chair, 14th Asian-Australasian Conference on Composite Materials (ACCM2026), Kota Kinabalu, Malaysia, 18 – 21 August 2026.
Organizing Committee, 17th International Conference on Materials Processing and Characterization (ICMPC 25), Miri, Malaysia, 27-29 November 2025
Organizing Committee, 1st Global Conference on Industrial, Materials, and Manufacturing (GCIMM 25), Bandar Seri Begawan, Brunei Darussalam, 20 – 22 October 2025
Guest judge, Mechanical Project Innovation and Exhibition (ProMIEX 2024), Politeknik Kota Bharu, Kelantan, 7th November 2024.
Organizing Committee, International Conference on Energy Transition and Exhibition 2024 (ICETe 24), Miri, Malaysia, 5-7 September 2024
Organizing Committee, Simposium on Industrial Material, Material and Manufacturing 2024 (SIMM 2024), Universiti Teknologi Malaysia (UTM), 5 – 6 JUNE 2024

Professional associations

2018: Board of Engineers Malaysia, Graduate Member (No. GE154509A)
2021: Institute of Materials, Minerals and Mining (IOM3), Professional Member (No. 673898)
2022: Malaysia Design Council, (MRM), Member (No. 1-A-000598)
2023: Institute of Materials, Malaysia, Professional Member (No. M-2024-0338)
2025: Malaysian Board of Technologies (MBOT), Professional Technologist (No. PT25080199)

Kyaw Myo Aung

PhD, MEng, BEng (Hons)
Lecturer, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 455
Tel: +60 85 630100 Ext:2427
Email: kyawmyoaung@curtin.edu.my

Research profiles

Google Scholar: https://scholar.google.com/citations?user=5M69de4AAAAJ&hl=en
SCOPUS: https://www.scopus.com/authid/detail.uri?authorId=57386457200
ORCID: https://orcid.org/0000-0002-1904-9432

Academic history

Doctoral Degree in Mechanical Engineering, International Islamic University Malaysia (IIUM) (2022)
Master of Science (Automotive Engineering), International Islamic University Malaysia (IIUM) (2017)
Bachelor of Engineering (Mechanical-Automotive) (Honours), International Islamic University Malaysia (IIUM) (2014)

Research interests

Mechanical engineering
Automotive engineering
Renewable energy/green technology
Solar panel, battery and supercapacitor
Python for random forest machine learning and data validation

Selected publications

a. Journal publications

Rahman, A.; Myo Aung, K.; Ihsan, S.; Raja Ahsan Shah, R.M.; Al Qubeissi, M.; T. Aljarrah, M., (2023), “Solar Energy Dependent Supercapacitor System with ANFIS Controller for Auxiliary Load of Electric Vehicles”, Energies 2023, 16, 2690 (Scopus)
Ataur Rahman & Kyaw Myo Aung (2021), “Development of solar supercapacitor by utilizing organic polymer and metal oxides for subsystem of EV”, Materials Research Express, Volume 8, Number 12. (SCIE/Scopus)
Rahman, A. Mohammed, K.M. Aung, A.F. Ismail, AKM Mohiuddin and S.I. Izan (2018), “Prospect and Challenges of Electric Vehicle Adaptability: An Energy Review Malaysia”, Energy Education Science and Technology Part A: Energy Science and Research, 36(2):139-152.
A.Rahman, K. Saifullah, K.M. Aung, A.F. Ismail and S.I. Izan (2018), “Nano Conductive filler Polymer towards Energy Efficient EV: A Review”, Energy Education Science and Technology Part A: Energy Science and Research 2018 Volume (issues) 36(3): 185-204.
Rahman, K.M. Aung, K. Saifullah and M. Rahman (2017), “Physics of ZnO/SiO2 Electrolyte Semi-Conductive Thermal Electric Generator”, International Journal of Advanced and Applied Sciences, 4(5) 2017, Pages: 35-40. (ESCI/Scopus)
Rahman, K.M. Aung and R. Afroz (2017), “Parametric Study of Palladium/Graphene Catalyst On-board Steam Reformer for Hydrogen Generation from IC Engine’s Waste”, International Journal of Engineering & Technology, Vol:17, No:01.(Scopus, 2016-2018)
Q. H. Shah and K.M. Aung (2014), “Investigation of Glass Plate Failure Mechanism Subjected to Copper and Steel Projectile Impacts”, IIUM Engineering Journal, Vol.15, No.1, 2014. (Scopus/ESCI)

b. Conference proceedings

“Nano-structured Zinc Oxide/Silicon dioxide Thermoelectric Generator: A Waste Heat Harvesting Technology”, International Conference on Advanced Manufacturing and Materials Engineering 2022.
“Modeling and Simulation of Graphene/palladium Catalyst Reformer for Hydrogen Generation from Waste of IC Engine”, IOP Conf. Series: Materials Science and Engineering, Volume 290 (2018) 012052

Professional associations

Board of Engineers Malaysia, Graduate Member

Wahyu Caesarendra

PhD, MEng, BEng (Hons)
Senior Lecturer, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 306
Tel: +60 85 630100 Ext:2502
Email: w.caesarendra@curtin.edu.my

Research profiles

Scopus Profile: https://www.scopus.com/authid/detail.uri?authorId=33067448100
Researcher ID: https://www.webofscience.com/wos/author/record/640095
Google Scholar: https://scholar.google.com.au/citations?hl=en&tzom=-480&user=Jy9KjCMAAAAJ
Publons: https://www.webofscience.com/wos/author/record/640095
ORCID: https://orcid.org/0000-0002-9784-4204
ResearchGate: https://www.researchgate.net/profile/Wahyu-Caesarendra-2

Background

Dr. Wahyu Caesarendra received a Bachelor of Engineering (Mechanical) degree from Diponegoro University, Indonesia, in 2005. In 2008, he was awarded the New University for Regional Innovation (NURI) and Brain Korea 21 (BK21) scholarships to pursue his master’s studies. He obtained a Master of Engineering (Mechanical) degree from Pukyong National University, South Korea, in 2010. In 2011, Dr. Caesarendra received the University Postgraduate Award (UPA) and the International Postgraduate Tuition Award (IPTA) from the University of Wollongong, Australia, where he earned his Doctor of Philosophy (Mechanical) degree in 2015. From February 2, 2017, to September 19, 2018, he worked as a Postdoctoral Research Fellow at the Rolls-Royce@NTU Corporate Lab, School of Mechanical and Aerospace Engineering, Nanyang Technological University (NTU), Singapore. He served as a Visiting Assistant Professor at the National Taiwan University of Science and Technology (NTUST) from July 1 to September 30, 2019. Additionally, he was a visiting academic at the Faculty of Mechanical Engineering, Politechnika Opolska (Opole University of Technology), from July 1 to December 31, 2023, and an Adjunct Professor in Mechanical Design Engineering at the Vocational School of Diponegoro University from November 11 to December 31, 2024.

Awards

Visiting academic award from Polish National Agency for Academic Exchange (Narodowa Agencja Wymiany Akademickiej), (Jul – Dec, 2023)
Postdoctoral Research Fellows from Nanyang Technological University and Rolls-Royce Manufacturing Industry, (Feb, 2017 – Sep, 2018)
University Postgraduate Award (UPA) and International Postgraduate Tuition Award (IPTA) from University of Wollongong, (Feb, 2011 – Dec, 2014)
New University for Regional Innovation (NURI) and Brain Korea 21 (BK21) scholarships from Pukyong National University, (Jan, 2008 – Jan, 2010)
Top 2% of most influential scientists year 2020-2022.
Best presenter award in The 8th International Conference on Mechanical Engineering and Robotics Research (ICMERR 2023), Poland, December 8-10, 2023.
Best presenter award in The 6th International Conference on Manufacturing Technologies (ICMT 2022), Singapore, February 12-14, 2022.
Best presenter award in The 2nd International Conference on Electronics, Biomedical Engineering, and Health Informatics (ICEBEHI), November 3-4, 2021, Surabaya, Indonesia.
Best paper award in The 2nd International Conference on Robotics, Biomimetics, and Intelligent Computational Systems (ROBIONETICS), 23-25 August 2017, Bali, Indonesia.
Best paper award in The IEEE Conference on Biomedical Engineering and Sciences 2016 (IECBES 2016), 4-8 December 2016, Kuala Lumpur, Malaysia.
Best paper award in International Conference on Industrial Internet of Things (ICIIOT), 23-25 November 2016, Bandung Indonesia.

Academic history

Doctoral Degree in Mechanical Engineering, University of Wollongong
Master Degree in Engineering (Mechanical), Pukyong National University
Bachelor Degree in Mechanical Engineering (Hons), Diponegoro University

Research interests

Smart Manufacturing
Vibration Condition Monitoring
Mechatronics
Robotic Manufacturing
Product Design Engineering
Artificial Intelligence

Selected publications

a. Book chapters

Pandiyan, V., Caesarendra, W., Chapter Title: Distributed Analytics Framework for Integrating Brownfield Systems to Establish Intelligent Manufacturing Architecture. In: Industry 4.0 – Current Status and Future Trends, IntechOpen 2020. https://doi.org/10.5772/intechopen.90472
Putri, F.T., Ariyanto, M, Caesarendra, W., Ismail, R., Pambudi, K.A., Pasmanasari, E.D., Low Cost Parkinson’s Disease Early Detection and Classification based on Voice and Electromyography Signal. In: Pedrycz, W., and Chen, S.-M., eds. Computational Intelligence for Pattern Recognition, Springer. 2018. https://doi.org/10.1007/978-3-319-89629-8_15

b. Journal publications

2025

R. Setiadi, W. Sumbodo, W. Caesarendra, D.F. Fitriana, K. Kriswanto, A. Bahatmaka, (2025), Efficiency and precision in printing: Study of the control system of rotogravure machine, Journal of Advanced Research in Applied Mechanics, 128(1), 11-13. https://doi.org/10.37934/aram.128.1.1123
E.P. Wahyuddin, R.E. Caraka, R. Kurniawan, W. Caesarendra, P.U. Gio, B. Pardamean, (2025), Improved LSTM hyperparameters alongside sentiment walk-forward validation for time series prediction, Journal of Open Innovation: Technology, Market, and Complexity, 11, 100458. https://doi.org/10.1016/j.joitmc.2024.100458
S. Saifullah, R. Dreżewski, A. Yudhana, M. Wielgosz, (2025), Modified U-Net with attention gate for enhanced automated brain tumor segmentation, Neural Computing and Applications. https://doi.org/10.1007/s00521-024-10919-3
R. Kurniawan, I. Sujono, W. Caesarendra, B.I. Nasution, P.U. Gio, (2025), Detection of flood-affected areas using multitemporal remote sensing data: a machine learning approach, Earth Science Informatics, 18(35). https://doi.org/10.1007/s12145-024-01549-3

2024

M.D. Surindra, W. Caesarendra, G. Królczyk, M.K. Gupta, (2024), Challenges of implementing Industry 4.0 in developed and developing countries: A comparative review, Mechanical Engineering for Society and Industry, 4(3). https://doi.org/10.31603/mesi.12177
A.S. Jaya, M. Farhan, W. Caesarendra, (2024), Performance evaluation of the static thrust and efficiency of an actuated biomimetic jellyfish model, Engineering Research Express, 2024, 6(4), 045211. https://doi.org/10.1088/2631-8695/ad81af
W.A.A. Kustiana, B.R. Trilaksono, M. Riyansyah, S.A. Putra, W. Caesarendra, G. Królczyk, M. Sulowicz, (2024), Bridge damage detection with support vector machine in accelerometer-based wireless sensor network, 12, 21 – 40. https://doi.org/10.1007/s42417-024-01400-5
W. Caesarendra, 2024, Bone drilling: Review with lab case study of bone layer classification using vibration signal and deep learning methods, Eng, 5(3), 1566-1593. https://doi.org/10.3390/eng5030083
M. Mahmud, I. Budiman, F. Indriani, D. Kartini, M.R. Faisal, H.A.A. Rozaq, O. Yildiz, W. Caesarendra, (2024), Implementation of C5.0 algorithm using chi-square feature selection for early detection of hepatitis C disease, 6(2), 116 – 124. https://doi.org/10.35882/jeeemi.v6i2.384
B. Utomo, Triwiyanto, S. Luthfiyah, W. Caesarendra, V.A. Athavale, (2024), IoT-based health information system using MitApp for abnormal electrocardiogram signal monitoring, Bulletin of Electrical Engineering and Informatics, 13(2), 1103–1110. https://doi.org/10.11591/eei.v13i2.5205
G.D. Wijaya, W. Caesarendra, M.I. Petra, G. Krolczyk, A. Glowacz, (2024), Comparative study of Gazebo and Unity 3D in performing a virtual pick and place of Universal Robot UR3 for assembly process in manufacturing, Simulation Modelling Practice and Theory, 132, 102895. https://doi.org/10.1016/j.simpat.2024.102895
T. Triwiyanto, I.P.A. Pawana, W. Caesarendra, (2024), Deep learning approach to improve the recognition of hand gesture with multi force variation using electromyography signal from amputees, Medical Engineering and Physics, 125, 104131. https://doi.org/10.1016/j.medengphy.2024.104131
A. Suprihanto, W. Caesarendra, D.B. Wibowo, M. Bartoszuk, G. Varga, (2024), Analysis of the effect of vacuum pressure variations on the fluidity, form ability, hardness, and density of the RTV 10A silicon rubber composites with 30% talc, Advances in Science and Technology Research Journal, 18(4), 12–22. https://doi.org/10.12913/22998624/187279
A. Rofii, B. Soerowirdjo, R. Irawan, W. Caesarendra, (2024), Utilize the prediction results from the neural network gate recurrent unit (GRU) model to optimize reactive power usage in high-rise buildings, International Journal of Robotics and Control Systems, 4(2), 628–654. https://doi.org/10.31763/ijrcs.v4i2.1351
M.D. Surindra, G.A.F. Alfarisy, W. Caesarendra, M.I. Petra, T. Prasetyo, T. Tjahjowidodo, G.M. Królczyk, A. Glowacz, M.K. Gupta, (2024), Use of machine learning models in condition monitoring of abrasive belt in robotic arm grinding process, Journal of Intelligent Manufacturing. https://doi.org/10.1007/s10845-024-02410-6
A.H. Su’udy, M.D. Surindra, W. Caesarendra, A. Sai’in, M.S.N. Ulum, T. Prasetyo, A. Glowaczc, N.F. Aulia, (2024), Experimental investigation of an electric bicycle performance with capacity of 350 Watt on consumption of lithium battery 36 V 21 AH, International Journal on Advanced Science, Engineering and Information Technology, 14(1), 304 – 308. https://doi.org/10.18517/ijaseit.14.1.19415
T. Widiyaningtyas, A.P. Wibawa, W. Caesarendra, U. Pujianto, (2024), MF-NCG: Recommendation algorithm using matrix factorization-based normalized cumulative genre, International Journal of Intelligent Engineering and Systems, 17(2), 180–189. https://doi.org/10.22266/ijies2024.0430.16
A. Glowacz, M. Sulowicz, J. Kozik, K. Piech, W. Glowacz, Z. Li, F. Brumercik, M. Gutten, D. Korenciak, A. Kumar, G.B. Lucas, M. Irfan M, W. Caesarendra, H. Liu, (2024), Fault diagnosis of electrical faults of three-phase induction motors using acoustic analysis, Bulletin of the Polish Academy of Sciences Technical Sciences, 72(1), e148440. https://doi.org/10.24425/bpasts.2024.148440
M.R. Sagita, A. Ma’arif, F. Furizal, C. Rekik, W. Caesarendra, R. Majdoubi, (2024), Motion system of a four-wheeled robot using a PID controller based on MPU and rotary encoder sensors, Control Systems and Optimization Letters, 2(2), 257-265. https://doi.org/10.59247/csol.v2i2.150
N. Setiawan, W. Caesarendra, R. Majdoubi, (2024), Implementation of Kalman filter on PID control system for DC motor under noisy condition, Buletin Ilmiah Sarjana Teknik Elektro, 6(3), 271–280. https://doi.org/10.12928/biste.v6i3.11524
M.A. Mahmood, S. Hastuty, I. Gołdasz, W. Caesarendra, (2024), A prototype design of a vertical axis wind turbine as one of the renewable energy sources in Brunei, Jurnal Ilmiah Penelitian dan Penerapan Teknologi Sistem Informasi, 8(2), 213-232. https://doi.org/10.29407/intensif.v8i2.22334
W.O.N. Fadillah, H.G. Ariswati, W. Caesarendra, (2024), Analysis infinite impulse response (IIR) filter for reducing motion artifacts in heart rate signals based on photoplethysmography, Jurnal Teknokes, 17(3). http://dx.doi.org/10.35882/teknokes.v17i3.673
F. Silvian, E.D. Setioningsih, T. Triwiyanto, W. Caesarendra, (2024), Development of a high flow oxygen analyzer for monitoring oxygen therapy in adults using high flow nasal cannula (HFNC), Jurnal Teknokes, 17(2), 84-99. http://dx.doi.org/10.35882/teknokes.v17i2.471
U. Ependi, W. Caesarendra, (2024), Sentiment analysis of urban opinions on COVID-19 handling in Brunei Darussalam using lexicon weighting and machine learning algorithms, SISFORMA 11(1), 78-84. https://doi.org/10.24167/sisforma.v11i1.11957

2023

N.L. Husni, O. Felia, Abdurrahman, A.S. Handayani, R. Pasarella, A. Bastari, M. Sylvia, W. Rahmaniar, S.A.H. Seno, W. Caesarendra, (2023), Pose detection of recurrent neural networks for monitoring littering violations, eng, 4(4), 2722-2740. https://doi.org/10.3390/eng4040155
M.D. Surindra, W. Caesarendra, M.I. Petra, T. Prasetyo, S.A. Putra, J. Zaini, A. Glowacz, A.G. Naim, (2023), Vibration-based characterization of underpass bridge using wavelet packet decomposition method, Journal of Engineering Science and Technology, 18(4), 2117-2131. https://shorturl.at/1QiYn
T. Triwiyanto, S. Luthfiyah, W. Caesarendra, A.A. Ahmed, (2023), Implementation of supervised machine learning on embedded Raspberry Pi system to recognize hand motion as preliminary study for smart prosthetic hand, Indonesian Journal of Electrical Engineering and Informatics, 11(3), 685-699. https://doi.org/10.52549/ijeei.v11i3.4397
H. Maghfiroh, A. Ma’arif, F. Adriyanto, I. Suwarno, W. Caesarendra, (2023), Adaptive linear quadratic Gaussian speed control of induction motor using fuzzy logic, Journal Europeen des Systemes Automatises, 56(4), 703-711. https://doi.org/10.18280/jesa.560420
F.T. Putri, W. Caesarendra, G. Krolczyk, R. Ismail, A. GLowacz, H. Prawibowo R.T. Indrawati, (2023), Human walking gait classification utilizing an artificial neural network for ergonomics study of lower limb prosthetics, Prosthesis, 5(3), 647-665. https://doi.org/10.3390/prosthesis5030046
F. Umam, M. Fuad, I. Suwarno, A. Ma’arif, W. Caesarendra, (2023), Obstacle avoidance based on stereo vision navigation system for omni-directional robot, Journal of Robotics and Control, 4(2), 227 – 242. https://doi.org/10.18196/jrc.v4i2.17977
A. Wibowo, J.D. Setiawan, H. Afrisal, A.A.S.M.M.J. Mertha, S.P. Santosa, K.B. Wisnu, A. Mardiyoto, H. Nurrakhman, B. Kartiwa, W. Caesarendra, (2023), Optimization of computational resources for real-time product quality assessment using deep learning and multiple high frame rate camera sensors, Applied System Innovation, 6(1), 25. https://doi.org/10.3390/asi6010025
T. Triwiyanto, W. Caesarendra, V. Abdullayev, A.A. Ahmed, H. Herianto, (2023), Single lead EMG signal to control an upper limb exoskeleton using embedded machine learning on Raspberry Pi, Journal of Robotics and Control, 4(1), 35 – 45. https://doi.org/10.18196/jrc.v4i1.17364
I.S. Sitanggang, I.A. Rahmani, W. Caesarendra, M.A. Agmalaro, A. Annisa, S. Sobir, (2023), Garlic field classification using machine learning and statistic approaches, AgriEngineering, 5(1), 631 – 645. https://doi.org/10.3390/agriengineering5010040
G. Varga, S. Smolnicki, M. Babič, W. Caesarendra, (2023), Energy efficiency analysis when grinding and diamond burnishing of components, In: Durakbasa, N.M., Gençyılmaz, M.G. (eds) Towards Industry 5.0. ISPR 2022. Lecture Notes in Mechanical Engineering. Springer, Cham., 378-396. https://doi.org/10.1007/978-3-031-24457-5_30
M.I. Sabaruddin, M.H.F. Mohammad Mazni Latiff, N.S. Awang Abdullah, W. Caesarendra, J. Zaini, (2023), Project-based learning in product design engineering: A case study of external gear pump design, In: Agarwal, R.K. (eds) Recent Advances in Manufacturing Engineering and Processes. ICMEP 2021. Lecture Notes in Mechanical Engineering. Springer, Singapore, 59-66. https://doi.org/10.1007/978-981-19-6841-9_6
R.A. Pratama, M. Loupatty, H. Hariyanto, W. Caesarendra, W. Rahmaniar, (2023), Fear and group defense effect of a holling type IV predator-prey system intraspecific competition, Emerging Science Journal, 7(2), 385 – 395. https://doi.org/10.28991/ESJ-2023-07-02-06
M.M.J. Samodro, R.D. Puriyanto, W. Caesarendra, (2023), Artificial potential field path planning algorithm in differential drive mobile robot platform for dynamic environment, International Journal of Robotics and Control Systems, 3(2), 161 – 170. https://doi.org/10.31763/ijrcs.v3i2.944
T. Triwiyanto, A.M. Maghfiroh, S.D. Musvika, F. Amrinsani, Syaifudin, R. Mak’ruf, N. Rachmat, W. Caesarendra, M. Sulowicz, (2023), State of the art methods of machine learning for prosthetic hand development: A review, In: Triwiyanto, T., Rizal, A., Caesarendra, W. (eds) Proceeding of the 3rd International Conference on Electronics, Biomedical Engineering, and Health Informatics. Lecture Notes in Electrical Engineering, Springer, Singapore, 1008, 555-574. https://doi.org/10.1007/978-981-99-0248-4_37

2022

R. Kurniawan, A.M.W. Saputra, A.W. Wijayanto, W. Caesarendra, (2022), Eco-environment vulnerability assessment using remote sensing approach in East Kalimantan, Indonesia, Remote Sensing Applications: Society and Environment, 27, 100791. https://doi.org/10.1016/j.rsase.2022.100791
Y. Umardani, D.B. Wibowo, W. Caesarendra, A. Suprihanto, K.A. Pranoto, (2022), Calculation of the rearfoot angle representing flatfoot from comparison to the Cavanagh arch index, Applied Sciences, 12(13), 6764. https://doi.org/10.3390/app12136764
S.D.H. Permana, G. Saputra, B. Arifitama, Yaddarabullah, W. Caesarendra, R. Rahim, (2022), Classification of bird sounds as an early warning method of forest fires using Convolutional Neural Network (CNN) algorithm, Journal of King Saud University – Computer and Information Sciences, 34(7), 4345-4357. https://doi.org/10.1016/j.jksuci.2021.04.013
W. Caesarendra, T.A. Hishamuddin, D.T.C. Lai, A. Husaini, L. Nurhasanah, A. Glowacz, G.A.F. Alfarisy, (2022), An embedded system using convolutional neural network model for online and real-time ECG signal classification and prediction, Diagnostics, 12(4), 795. https://doi.org/10.3390/diagnostics12040795
H. Hariyanto, D. Parenden, P. Sahupala, R.D. Latuheru, A. Andriyono, N. Yusman, Mustofa, W. Caesarendra, A. Glowacz, (2022), The analysis of energy and exergy performance of dye-sensitized solar cell using red fruit (Pandanus Conoideus) as an absorbent medium, International Journal of Heat and Technology, 40(1), 9-16. https://doi.org/10.18280/ijht.400102
T. Triwiyanto, W. Caesarendra, M.H. Purnomo, M. Sułowicz, I.D.G.H. Wisana, D. Titisari, L. Lamidi, R. Rismayani, (2022), Embedded machine learning using a multi-thread algorithm on a raspberry Pi platform to improve prosthetic hand performance, Micromachines, 13(2), 191. https://doi.org/10.3390/mi13020191
W. Caesarendra, W. Rahmaniar, J. Mathew, A. Thien, (2022), Automated Cobb angle measurement for adolescent idiopathic scoliosis using convolutional neural network, Diagnostics, 12(2), 396. https://doi.org/10.3390/diagnostics12020396
L. Dela, D. Sutopo, S. Kurniawan, T. Tjahjowidodo, W. Caesarendra, (2022), EMG based classification of hand gesture using PCA and SVM, In: Triwiyanto, T., Rizal, A., Caesarendra, W. (eds) Proceedings of the 2nd International Conference on Electronics, Biomedical Engineering, and Health Informatics. Lecture Notes in Electrical Engineering, vol 898. Springer, Singapore, 898, 459-477. https://doi.org/10.1007/978-981-19-1804-9_35
M.A. Hossen, O.W. Hong, W. Caesarendra, (2022), Investigation of the unsupervised machine learning techniques for human activity discovery, In: Triwiyanto, T., Rizal, A., Caesarendra, W. (eds) Proceedings of the 2nd International Conference on Electronics, Biomedical Engineering, and Health Informatics. Lecture Notes in Electrical Engineering, vol 898. Springer, Singapore. 898, 499-514. https://doi.org/10.1007/978-981-19-1804-9_38
W. Caesarendra, W. Rahmaniar, J. Mathew, A. Thien, (2022), AutoSpine-Net: Spine detection using convolutional neural networks for Cobb angle classification in adolescent idiopathic scoliosis, In: Triwiyanto, T., Rizal, A., Caesarendra, W. (eds) Proceedings of the 2nd International Conference on Electronics, Biomedical Engineering, and Health Informatics. Lecture Notes in Electrical Engineering, Springer, Singapore, 898, 547-556. https://doi.org/10.1007/978-981-19-1804-9_41
A. Salam, F. Purnomo, W. Caesarendra, (2022), Comparison study of single valve and sequential valve mode on the effect of steam turbine heat rate, In: Lei, X., Koryanov, V.V. (eds) Proceedings of 5th International Conference on Mechanical, System and Control Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, 179-189. https://doi.org/10.1007/978-981-16-9632-9_20
L. Noerochim, A.T. Wibowo, Widyastuti, A. Subhan, B. Prihandoko, W. Caesarendra, (2022), Direct double coating of carbon and nitrogen on fluoride-doped Li4Ti5O12 as an anode for lithium-ion batteries, Batteries, 8(1), 5. https://doi.org/10.3390/batteries8010005
R. Widiastuti, J. Zaini, W. Caesarendra, G. Kokogiannakis, S.N.N. Binti Suhailian, (2022), Thermal insulation effect of green façades based on calculation of heat transfer and long wave infrared radiative exchange, Measurement: Journal of the International Measurement Confederation, 188, 110555. https://doi.org/10.1016/j.measurement.2021.110555
M. Tauviqirrahman, J. Jamari, M. Bagir, W. Caesarendra, P. Paryanto, (2022), Elastohydrodynamic behavior analysis on water-lubricated journal bearing: a study of acoustic and tribological performance based on CFD-FSI approach, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(1), 1. https://doi.org/10.1007/s40430-021-03314-9
J.C. Kurnia, M.S. Shatri, Z.A.Putra, J. Zaini, W. Caesarendra, A.P. Sasmito, (2022), Geothermal energy extraction using abandoned oil and gas wells: Techno-economic and policy review, International Journal of Energy Research, 46(1), 28-60. https://doi.org/10.1002/er.6386

2021

M.D.N, Meinita, A. Amron, A. Trianto, D. Harwanto, W. Caesarendra, G.-T. Jeong, J.-S. Choi, (2021), Levulinic acid production from macroalgae: Production and promising potential in industry, Sustainability, 13(24), 13919. https://doi.org/10.3390/su132413919
N.L. Husni, P.A.R. Sari, A.S. Handayani, T. Dewi, S.A.H. Seno, W. Caesarendra, A. Glowacz, K. Oprzędkiewicz, M. Sulowicz, (2021), Real-time littering activity monitoring based on image classification method, Smart Cities, 4(4), 1496-1518. https://doi.org/10.3390/smartcities4040079
J.H. Siow, M.R. Bilad, W. Caesarendra, J.J. Leam, M.A. Bustam, N.S. Sambudi, Y. Wibisono, T.M.I. Mahlia, (2021), Progress in development of nanostructured manganese oxide as catalyst for oxygen reduction and evolution reaction, Energies, 14(19), 6385. https://doi.org/10.3390/en14196385
S. Susanto, I.T. Simorangkir, R. Analia, D.S. Pamungkas, H. Soebhakti, A. Sani, W. Caesarendra, (2021), Real-time identification of knee joint walking gait as preliminary signal for developing lower limb exoskeleton, Electronics, 10(17), 2117. https://doi.org/10.3390/electronics10172117
A. Glowacz, R. Tadeusiewicz, S. Legutko, W. Caesarendra, M. Irfan, H. Liu, F. Brumercik, M. Gutten, M. Sulowicz, J.A. Antonino Daviu, T. Sarkodie-Gyan, P. Fracz, A. Kumar, J. Xiang, (2021), Fault diagnosis of angle grinders and electric impact drills using acoustic signals, Applied Acoustics, 179, 108070. https://doi.org/10.1016/j.apacoust.2021.108070
W. Rahmaniar, W.-J.,Wang, W. Caesarendra, A. Glowacz, K. Oprzędkiewicz, M. Sułowicz, M. Irfan, (2021), Distance measurement of unmanned aerial vehicles using vision-based systems in unknown environments, Electronics, 10(14), 1647. https://doi.org/10.3390/electronics10141647
M. Irfan, A.S. Alwadie, A. Glowacz, M. Awais, S. Rahman, M.K.A. Khan, M. Jalalah, O. Alshorman, W. Caesarendra, (2021), A novel feature extraction and fault detection technique for the intelligent fault identification of water pump bearings, Sensors, 21(12), 4225. https://doi.org/10.3390/s21124225
W. Caesarendra, T. Triwiyanto, V. Pandiyan, A. Glowacz, S.D.H. Permana, T. Tjahjowidodo, (2021), A cnn prediction method for belt grinding tool wear in a polishing process utilizing 3-axes force and vibration data, Electronics, 10(2), 1429. https://doi.org/10.3390/electronics10121429
I.S. Aisyah, W. Caesarendra, D. Kurniawati, M. Maftuchah, D. Agung, A. Glowacz, K. Oprzedkiewicz, H. Liu, (2021), Study of jatropha curcas linn and olea europaea as bio‐oil lubricant to physical properties and wear rate, Lubricants, 9(4), 39. https://doi.org/10.3390/lubricants9040039
Y.D. Arferiandi, W. Caesarendra, H. Nugraha, (2021), Heat rate prediction of combined cycle power plant using an artificial neural network (ANN) method, Sensors, 21(4), 1022. https://doi.org/10.3390/s21041022
M. Tauviqirrahman, M.F. Afif, P. Paryanto, J Jamari, W. Caesarendra, (2021), Investigation of the tribological performance of heterogeneous slip/no-slip journal bearing considering thermohydrodynamic effects, Fluids 6(2), 48. https://doi.org/10.3390/fluids6020048
N. Uddin, M. Iaeng, H.G. Harno, W. Caesarendra, (2021), Vector-based modelling and trajectory tracking control of autonomous two-wheeled robot, IAENG International Journal of Computer Science, 48(4), 23. https://www.iaeng.org/IJCS/issues_v48/issue_4/IJCS_48_4_23.pdf
S.D.H. Permana, G. Saputra, B. Arifitama, Yaddarabullah, W. Caesarendra, R. Rahim, (2021), Classification of bird sounds as an early warning method of forest fires using Convolutional Neural Network (CNN) algorithm, Journal of King Saud University – Computer and Information Sciences, 34(7), 4345-4357. https://doi.org/10.1016/j.jksuci.2021.04.013

2020

R. Widiastuti, J. Zaini, W. Caesarendra, (2020), Field measurement on the model of green facade systems and its effect to building indoor thermal comfort, Measurement, 166, 108212. https://doi.org/10.1016/j.measurement.2020.108212
A. Ali, F. Ali, M. Irfan, F. Muhammad, A. Glowacz, J.A. Antonino-Daviu, W. Caesarendra, S. Qamar, (2020), Mechanical pressure characterization of cnt-graphene composite, Micromachines, 11(11), 1000. https://doi.org/10.3390/mi11111000
Z.H. Qaisar, M. Irfan, T. Ali, A. Ahmad, G. Ali, A. Glowacz, W. Glowacz, W. Caesarendra, A.M. Mashraqi, U. Draz, S. Hussain, (2020), Effective beamforming technique amid optimal value for wireless communication, Electronics, 9(11), 1869. https://doi.org/10.3390/electronics9111869
L. Noerochim, W. Caesarendra, A. Habib, Widyastuti, Suwanto, Y.L. Ni’mah, A. Subhan, B. Prihandoko, B. Kosasih, (2020), Role of TiO2 phase composition tuned by LiOH on the electrochemical performance of dual-phase Li4Ti5O12-TiO2 microrod as an anode for lithium-ion battery, Energies, 13(20), 5251. https://doi.org/10.3390/en13205251
M.H.F. Taha, H. Ashraf, W. Caesarendra, (2020), A brief description of cyclic voltammetry transducer-based nonenzymatic glucose biosensor using synthesized graphene electrodes, Applied System Innovation, 3(3), 32. https://doi.org/10.3390/asi3030032
D.B. Wibowo, A. Suprihanto, W. Caesarendra, S. Khoeron, A. Glowacz, M. Irfan, (2020), A simple foot plantar pressure measurement platform system using force-sensing resistors, Applied System Innovation, 3(3), 33. https://doi.org/10.3390/asi3030033
A.M. Alshorman, O. Alshorman, M. Irfan, A. Glowacz, F. Muhammad, W. Caesarendra, (2020), Fuzzy-based fault tolerant control for omnidirectional mobile robot, Machines, 8(3), 55. https://doi.org/10.3390/machines8030055
H. Susanto, F.-Y. Leu, W. Caesarendra, F. Ibrahim, P.K. Haghi, U. Khusni, A. Glowacz, (2020), Managing cloud intelligent systems over digital ecosystems: Revealing emerging app technology in the time of the COVID19 pandemic, Applied System Innovation, 3(3), 37. https://doi.org/10.3390/asi3030037
T. Prasetyo, M.D. Surindra, W. Caesarendra, Taufik, A. Glowacz, M. Irfan, W. Glowacz, (2020), Influence of superheated vapour in organic rankine cycles with working fluid R123 utilizing low-temperature geothermal resources, Symmetry, 12(9), 1463. https://doi.org/10.3390/sym12091463
R. Ismail, R.B. Taqriban, M. Ariyanto, A.T. Atmaja, Sugiyanto, A. Glowacz, M. Irfan, W. Glowacz, W. Caesarendra, (2020), Affordable and faster transradial prosthetic socket production using photogrammetry and 3D printing, Electronics, 9, 1456. https://doi.org/10.3390/electronics9091456
J.D. Setiawan, M. Ariyanto, M. Munadi, M. Mutoha, A. Glowacz, W. Caesarendra, (2020), Grasp posture control of wearable extra robotic fingers with flex sensors based on neural network, Electronics, 9, 905. https://doi.org/10.3390/electronics9060905
P.Y.Y. Chin, Q. Cheok, A. Glowacz, W. Caesarendra, (2020), A review of in-vivo and in-vitro real-time corrosion monitoring systems of biodegradable metal implants, Applied Sciences, 10(9), 3141. https://doi.org/10.3390/app10093141
R. Widiastuti, J. Zaini, W. Caesarendra, (2020), Data on records of temperature and relative humidity in a building model with green facade systems, Data in Brief, 28, 104896. https://doi.org/10.1016/j.dib.2019.104896
M. Tahir, W. Caesarendra, (2020), Performance of smokehouse designed for smoking fish with the indirect method, Processes, 8(2), 204. https://doi.org/10.3390/pr8020204
R. Widiastuti, J. Zaini, M.A. Wibowo, W. Caesarendra, (2020), Indoor thermal performance analysis of vegetated wall based on CFD simulation, CFD Letters, 12(5), 82-90. https://semarakilmu.com.my/journals/index.php/CFD_Letters/article/view/10013
V. Pandiyan, W. Caesarendra, T. Tjahjowidodo, (2020), Modelling of material removal in abrasive belt grinding process: A regression approach, Symmetry, 12(1), 5606. https://doi.org/10.3390/sym12010099
A. Suprihanto, D.F. Fitriyana, Armila, W. Caesarendra, (2020), An application of high temperature gas nitriding (HTGN) method to improve the quality of implant materials 316L and 316LVM, Springer Proceedings in Physics, 131-142. https://doi.org/10.1007/978-981-15-2294-9_12
D.F. Fitriyana, H. Suhaimi, Sulardjaka, R. Noferi, W. Caesarendra, (2020), Synthesis of Na-P zeolite from geothermal sludge, Springer Proceedings in Physics, 51-59. https://doi.org/10.1007/978-981-15-2294-9_5
M. Arozi, W. Caesarendra, M. Ariyanto, M. Munadi, J.D. Setiawan, A. Glowacz, (2020), Pattern recognition of single-channel sEMG signal using PCA and ANN method to classify nine hand movements, Symmetry, 12(4), 541. https://doi.org/10.3390/sym12040541
D. F. Fitriyana, W. Caesarendra, S. Nugroho, G.D. Haryadi, M.A. Herawan, M. Rizal, R. Ismail, (2020), The effect of compressed air pressure and stand-off distance on the twin wire arc spray (TWAS) coating for pump impeller from AISI 304 stainless steel, Springer Proceedings in Physics, 119-130. https://doi.org/10.1007/978-981-15-2294-9_11

c. Conferences

L.W. Ann, M.A. Mahmood, A.R. Shufian, W. Caesarendra, T. Wijaya, M. Sulowicz, (2024), Project-based learning from the student point of view: A case study of product design engineering module, 2nd International Conference on Mechanical Construction, Advanced Material, and Energy Conversion, 24–25 September, Tangerang Selatan, Indonesia. https://doi.org/10.1063/5.0203269
H. Maiddin, D.H.P.H.M. Yassin, W. Caesarendra, (2024), Enhancing battery prognostics modelling with digit frequency preprocessing analysis, International Conference on Power Electronics and Energy System (ICPEES). 1-3 March, Kuala Lumpur, Malaysia. https://doi.org/10.1088/1742-6596/2777/1/012002
M. Radhiva M., Abdillah M.H., Putra G.D.K., Wajdi M.R., Wulandari P., Caesarendra W., Lubis A.H., Syahriar A., (2023), Performance analysis of H-type vertical axis wind turbine by using novelty numerical simulink method, 2nd International Conference on Renewable Power (ICRP), 28-29 March, Nuh, India. https://doi.org/10.1007/978-981-99-6749-0_14
F.T. Putri, M.N. Mara, R. Ismail, M. Ariyanto, H. Prawibowo, Triwiyanto, S. Luthfiyah, W. Caesarendra, (2023), Voice features examination for Parkinson’s disease detection utilizing machine learning methods, 4th International Conference on Electronics, Biomedical Engineering, and Health Informatics (ICEBEHI), 4-5 October, Surabaya, Indonesia. https://doi.org/10.1007/978-981-97-1463-6_39
Triwiyanto, L.F. Wakidi, W. Caesarendra, A. Rizal, A.A. Ahmed, V.H. Abdullayev, (2023), A review of 3D printing technology for the development of exoskeletons for upper limb rehabilitation, 4th International Conference on Electronics, Biomedical Engineering, and Health Informatics (ICEBEHI), 4-5 October, Surabaya, Indonesia. https://doi.org/10.1007/978-981-97-1463-6_44
W. Caesarendra, P. Wulandari, K. Gatnar, Triwiyanto, (2023), Bone drilling vibration signal classification using convolutional neural network to determine bone Llayers, 4th International Conference on Electronics, Biomedical Engineering, and Health Informatics (ICEBEHI), 4-5 October, Surabaya, Indonesia. https://doi.org/10.1007/978-981-97-1463-6_40
Triwiyanto, S. Luthfiyah, B. Utomo, I.P.A. Pawana, W. Caesarendra, V.A. Athavale, (2024), Recent advances and challenges in 3D printing of prosthetic hands, 4th International Conference on Electronics, Biomedical Engineering, and Health Informatics (ICEBEHI) 4-5 October, Surabaya, Indonesia. https://doi.org/10.1007/978-981-97-1463-6_43
K.A. Pranoto, W. Caesarendra, W., I. Petra, G. Królczyk, M.D. Surindra, P.W. Yoyo, (2023), Burrs and sharp edge detection of metal workpiece using CNN image classiﬁcation method for intelligent manufacturing application, IEEE 21st International Conference on Industrial Informatics (INDIN), 17-20 July, Lemgo, Germany. https://doi.org/10.1109/INDIN51400.2023.10217849
I.K.A. Purnawan, A. Dharma Wibawa, W. Caesarendra, M.H. Purnomow, (2023), Enhancing neuromuscular disease diagnosis through PCA-SVM analysis of EMG signals: A classification approach, 49th Annual Conference of the IEEE Industrial Electronics Society (IECON), 16-19 October, Singapore, Singapore. https://doi.org/10.1109/IECON51785.2023.10311759
W. Caesarendra, K.A. Pranoto, J. Goldasz, M.I. Petra, M. Sulowicz, J. Zaini, S.H. Suryo, G.D. Haryadi, (2021), Analysis of stress on boom excavator v EC650BE using finite element method, 6th International Conference on Mechanical Engineering and Robotics Research (ICMERR), 11–13 December, Krakow Poland. https://doi.org/10.1109/ICMERR54363.2021.9680847
W. Caesarendra, M. Sulowicz, A. Suprihanto, D.B. Wibowo, E. Abas, S.H. Suryo, A. Wibiantoro, (2021), Keris geometry accuracy using 3D scanning technique, 6th International Conference on Mechanical Engineering and Robotics Research (ICMERR), 11–13 December, Krakow, Poland. https://doi.org/10.1109/ICMERR54363.2021.9680816
K. Murugiah, M.I. Zakaria, H Suhaimi, W. Caesarendra, N.S. Sambudi, (2021), Synthesis and characterisation of Hydroxyapatite (HAp) from Asiatic Hard Clam (Meretrix meretrix) and Blood Cockle Clam (Anadara granosa) using wet precipitation process, 1st National Biomedical Engineering Conference (NBEC 2021), 9–10 November, Kuala Lumpur, Malaysia. https://doi.org/10.1109/NBEC53282.2021.9618744
P. Shaniya, G. Jati, M.R. Alhamidi, W. Caesarendra, W. Jatmiko, (2021), YOLOv4 RGBT human detection on unmanned aerial vehicle perspective, 6th International Workshop on Big Data and Information Security (IWBIS), 23–26 October, Depok, Indonesia. https://doi.org/10.1109/IWBIS53353.2021.9631856
S.E. Sitepu, G. Jati, M.R. Alhamidi, W. Caesarendra, W. Jatmiko, (2021), FaceNet with RetinaFace to identify masked face, 6th International Workshop on Big Data and Information Security (IWBIS), 23–26 October, Depok, Indonesia. https://doi.org/10.1109/IWBIS53353.2021.9631848
Y. Baskoro, I. Jaya, W. Caesarendra, A. Winardi, E. Nugroho, M.F. Dwihakoso, (2021), Re-design blocking end winding rotor generator to prevent extreme expansion of coil towards axial direction: A case study, International Conference on Technology and Policy in Energy and Electric Power (ICT-PEP), 29–30 September, Jakarta, Indonesia. https://doi.org/10.1109/ICT-PEP53949.2021.9600934
A. Salam, F. Purnomo, W. Caesarendra, (2021), Comparison study of single valve and sequential valve mode on the effect of steam turbine heat rate, 5th International Conference on Mechanical, System, and Control Engineering (ICMSC), 28–30 May, Kazan, Rusia. https://doi.org/10.1007/978-981-16-9632-9_20
Harpendi, Sugianto, D. Wijanarko, W. Caesarendra, (2021), Performance evaluation of penstock by-pass system modification on HEPP (Hydro Electric Power Plant) with CFD analysis to optimize power consumption, 7^th International Conference on Electrical Engineering Control and Robotics (ICEECR), 21–23 January, Fujian, China. https://doi.org/10.1088/1742-6596/1887/1/012015
A. Waskito, W. Caesarendra, (2021), Performance improvement of heat recovery steam generator (HRSG) in combined cycle power plant by replacing tube of HP economizer and HP evaporator, 11^th International Conference on Power, Energy and Electrical Engineering (ICPEEE), 26–28 February, Sigha, Japan. https://doi.org/10.1109/CPEEE51686.2021.9383382
Y. Baskoro, I. Jaya, A. Glowacz, M. Sulowicz, W. Caesarendra, (2020), Heat transfer optimization of end winding rotor generator by the use of modified axial spacer: A case study, 1st International Conference on Industrial Automation, Smart Grid and Its Application (ICIASGA), 4–5 November, East Java, Indonesia. https://doi.org/10.1088/1742-6596/1845/1/012081
H. Hermawan, W. Caesarendra, (2020), An investigation of shaft failure on induced draft fan in a steam power plant, 1st International Conference on Industrial Automation, Smart Grid and Its Application (ICIASGA), 4–5 November, East Java, Indonesia. https://doi.org/10.1088/1742-6596/1845/1/012080
H. Yudisaputro, W. Caesarendra, M.N. Yuniarto, Yohanes, (2020), A study on the performance and reliability effect of low-rank coal to the steam power plant, 1^st International Conference on Industrial Automation, Smart Grid and Its Application (ICIASGA), 4–5 November, East Java, Indonesia. https://doi.org/10.1088/1742-6596/1845/1/012053
N.A. Akbar, A. Sunyoto, M.R. Arief, W. Caesarendra, (2020), Improvement of decision tree classifier accuracy for healthcare insurance fraud prediction by using Extreme Gradient Boosting algorithm, International Conference on Informatics, Multimedia, Cyber, and Information System (ICIMCIS), 19–20 November, Jakarta, Indonesia. https://doi.org/10.1109/ICIMCIS51567.2020.9354286
R. Widiastuti, J. Zaini, W. Caesarendra, D.S. Laila, J.C. Kurnia, (2020), Prediction on the indoor thermal comfort of occupied room based on IoT climate measurement open datasets, International Conference on Informatics, Multimedia, Cyber, and Information System (ICIMCIS), 19–20 November, Jakarta, Indonesia. https://doi.org/10.1109/ICIMCIS51567.2020.9354277
R. Hakim, M.H. Albana, H. Widiastuti, W. Caesarendra, (2020), Prototype development of motorbike towing hook towards authorized mechanic perception and investigation, 4th Forum in Research, Science, and Technology (FIRST), Palembang, Indonesia. https://doi.org/10.2991/ahe.k.210205.076
M.D. Surindra, W. Caesarendra, (2020), Investigation study of pressure different effect at evaporator in organic Rankine cycle simulator (ORCS) using low-grade waste heat, 4th Forum in Research, Science, and Technology (FIRST), Palembang, Indonesia. https://doi.org/10.2991/ahe.k.210205.077
H. Othman, M.I. Petra, L.C. De Silva, W. Caesarendra, (2020), Automated trash collector design, 8^th Engineering International Conference (EIC), Semarang Indonesia. https://doi.org/10.1088/1742-6596/1444/1/012040
J. Pratama, D.F. Fitriyana, Rusiyanto, J.P. Siregar, W. Caesarendra, (2020), A low cost validation method of finite element analysis on a thin walled vertical pressure vessels, 8^th Engineering International Conference (EIC), Semarang Indonesia. https://doi.org/10.1088/1742-6596/1444/1/012042
A. Sutrisno, D. Handayani, W. Caesarendra, I. Gunawan, R. Indan, (2019), A framework of designing reliable disaster response operation using axiomatic design, Recent Progress on: Mechanical, Infrastructure and Industrial Engineering: International Symposium on Advances in Mechanical Engineering (ISAME): Quality in Research (QiR), 22-24 July, Padang, Indonesia. https://doi.org/10.1063/5.0000913
A. Sutrisno, D. Handayani, W. Caesarendra, I. Gunawan, M. Meri, W. Purba, (2019), An application of anticipatory FMEA for preventing failures in humanitarian response operation, 5th International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering (ICIMECE), 17-18 September 2019, Surakarta, Indonesia. https://doi.org/10.1063/5.0000612
A. Sutrisno, D. Handayani, W. Caesarendra, I. Gunawan, (2019), Categorization of reliability performance indicators of humanitarian response supply chain, 3rd International Conference on Engineering Technology for Sustainable Development (ICET4SD), 23-24 October, Yogyakarta, Indonesia. https://doi.org/10.1088/1757-899X/722/1/012007
R.A. Virrey, W. Caesarendra, M.I. Bin Pg Hj Petra, E. Abas, A. Husaini, C. De Silva Liyanage, (2019), Milestone of pain intensity evaluation from facial action units, International Conference on Electrical Engineering and Computer Science (ICECOS), 2-3 October, Batam, Indonesia. https://doi.org/10.1109/ICECOS47637.2019.8984464
W. Caesarendra, T. Wijaya, B.K. Pappachan, T. Tjahjowidodo, (2019), Adaptation to industry 4.0 using machine learning and cloud computing to improve the conventional method of deburring in aerospace manufacturing industry, International Conference on Information and Communication Technology and Systems (ICTS), 18-19 July, Surabaya, Indonesia. https://doi.org/10.1109/ICTS.2019.8850990
T. Warsokusumo, T. Prahasto, W. Caesarendra, A. Widodo, (2018), Optimization of power plant operation parameters for efficiency improvement through data-driven relevance vector machine regression algorithm, International Conference on Applied Engineering (ICAE), 3-4 October, Batam, Indonesia. https://doi.org/10.1109/INCAE.2018.8579156
M. Ariyanto, R. Ismail, W. Caesarendra, G.D. Wijaya, A. Suriyanto, (2018), Development of myoelectric prosthetic hand based on Arduino IDE and visual C# for trans-radial amputee in Indonesia, International Conference on Applied Engineering (ICAE), 3-4 October, Batam, Indonesia. https://doi.org/10.1109/INCAE.2018.8579393
M.R. Maulani, R.M. Awangga, D.A. Wijayanti, W. Caesarendra, S.F. Pane, (2018), An analysis of customer agrotourism resort behavior based on RFM and mean shift clustering, International Conference on Applied Engineering (ICAE), 3-4 October, Batam, Indonesia. https://doi.org/10.1109/INCAE.2018.8579386
T. Wijaya, W. Caesarendra, B.K. Pappachan, T. Tjahjowidodo, (2017), Robot control and decision making through real-time sensors monitoring and analysis for industry 4.0 implementation on aerospace component manufacturing, IEEE Pacific Rim Conference on Communications, Computers and Signal Processing, 21-23 August, Victoria, B.C., Canada. https://doi.org/10.1109/PACRIM.2017.8121928
W. Caesarendra, T. Tjahjowidodo, D. Sutopo, (2017), EMG based classification of hand gestures using PCA and ANFIS, International Conference on Robotics, Biomimetics, and Intelligent Computational Systems (ROBIONETICS), 23-25 August, Bali, Indonesia. https://doi.org/10.1109/ROBIONETICS.2017.8203430
M. Ariyanto, J.D. Setiawan, M.F. Rahmana, G.A. Widhiatmoko, W. Caesarendra, T. Tjahjowidodo, (2017), Development of a low cost underwater manipulator robot integrated with simmechanics 3D animation, International Conference on Robotics, Biomimetics, and Intelligent Computational Systems (ROBIONETICS), 23-25 August, Bali, Indonesia. https://doi.org/10.1109/ROBIONETICS.2017.8203429
W. Caesarendra, R. Ismail, D. Kurniawan, G. Karwiky, C. Ahmad, (2016), Sudden cardiac death predictor based on spatial QRS-T angle feature and support vector machine, IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4-8 December, Kuala Lumpur, Malaysia. https://doi.org/10.1109/IECBES.2016.7843440
M. Ariyanto, R. Ismail, A. Nurmiranto, W. Caesarendra, Paryanto, J. Franke, (2016), Development of a low cost anthropomorphic robotic hand driven by modified glove sensor and integrated with 3D animation, IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4-8 December, Kuala Lumpur, Malaysia. https://doi.org/10.1109/IECBES.2016.7843470
R. Ismail, M. Ariyanto, W. Caesarendra, I. Haryanto, H.K. Dewoto, Paryanto, (2016), Speech control of robotic hand augmented with 3D animation using neural network, IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), 4-8 December, Kuala Lumpur, Malaysia. https://doi.org/10.1109/IECBES.2016.7843469
F.T. Putri, M. Ariyanto, I. Haryanto, M. Arozi, W. Caesarendra, M.R.I. Hanan, (2016), Development of unmanned aerial vehicle (UAV) ornithopter with wireless radio control, 3rd International Conference on Information Technology, Computer, and Electrical Engineering (ICITACEE), 19-20 October, Semarang, Indonesia. https://doi.org/10.1109/ICITACEE.2016.7892415
M. Arozi, F.T. Putri, M. Ariyanto, W. Caesarendra, A. Widyotriatmo, Munadi, J.D. Setiawan, (2016), Electromyography (EMG) signal recognition using combined discrete wavelet transform based on artificial neural network (ANN), 2nd International Conference of Industrial, Mechanical, Electrical, and Chemical Engineering (ICIMECE), 6-7 October, Yogyakarta, Indonesia. https://doi.org/10.1109/ICIMECE.2016.7910421
W. Caesarendra, A. Widyotriatmo, S.U. Lekson, K.A. Mustaqim, (2016), A pattern classification method of hand EMG signals based on principal component analysis and artificial neural network, International Conference on Instrumentation, Control and Automation (ICA), 29-31 August, Bandung, Indonesia. https://doi.org/10.1109/ICA.2016.7811469
R. Ismail, M. Ariyanto, W. Caesarendra, A. Nurmiranto, (2016), Development of robotic hand integrated with SimMechanics 3D animation, International Seminar on Intelligent Technology and Its Applications (ISITIA), 28-30 July, Lombok, Indonesia. https://doi.org/10.1109/ISITIA.2016.7828733
W. Caesarendra, F.T. Putri, M. Ariyanto, J.D. Setiawan, (2015), Pattern recognition methods for multi stage classification of Parkinson’s disease utilizing voice features, IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), 7-11 July, Busan, South Korea. https://doi.org/10.1109/AIM.2015.7222636
M. Ariyanto, W. Caesarendra, K.A. Mustaqim, M. Irfan, J.A. Pakpahan, J.D. Setiawan, (2015), Finger movement pattern recognition method using artificial neural network based on electromyography (EMG) sensor, 2015 International Conference on Automation, Cognitive Science, Optics, Micro Electro-Mechanical System, and Information Technology (ICACOMIT), 29-30 October, Bandung, Indonesia. https://doi.org/10.1109/ICACOMIT.2015.7440146
W. Caesarendra, M. Ariyanto, S.U. Lexon, E.D. Pasmanasari, C.R. Chang, J.D. Setiawan, (2015), EEG based pattern recognition method for classification of different mental tasking: Preliminary study for stroke survivors in Indonesia, International Conference on Automation, Cognitive Science, Optics, Micro Electro-Mechanical System, and Information Technology (ICACOMIT), 29-30 October, Bandung, Indonesia. https://doi.org/10.1109/ICACOMIT.2015.7440193
W. Caesarendra, M. Ariyanto, J.D. Setiawan, M. Arozi, C.R. Chang, (2014), A pattern recognition method for stage classification of Parkinson’s disease utilizing voice feature, IEEE Conference on Biomedical Engineering and Science (IECBES), 8-10 December, Kuala Lumpur, Malaysia. https://doi.org/10.1109/IECBES.2014.7047636
W. Caesarendra, B. Kosasih, A.K. Tieu, C.A.S. Moodie, (2013), An application of nonlinear feature extraction – A case study for low speed slewing bearing condition monitoring and prognosis, IEEE/ASME International Intelligent Mechatronics (AIM), 9-12 July, Wollongong, Australia. https://doi.org/10.1109/AIM.2013.6584344
W. Caesarendra, P.B. Kosasih, A.K. Tieu, C.A.S. Moodie, (2013), Condition monitoring of low speed slewing bearing based on largest Lyapunov exponent algorithm and circular-domain feature extractions, 26th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM), 11-13 June, Helsinki, Finland. https://hdl.handle.net/10779/uow.27697596.v1
W.C. Caesarendra, B. Kosasih, B.K. Choi, K. Tieu, C.A.S. Moodie, (2012), Condition monitoring of naturally damaged slewing bearing based on EMD and EEMD methods, 7th World Congress on Engineering Asset Management (WCEAM), 8-9 October, Daejon, Korea. https://doi.org/10.1007/978-3-319-06966-1_12
W. Caesarendra, M. Ariyanto, D.B. Suyanto, (2011), Attitude and altitude control design of quadrotor unmanned aerial vehicle in hover flight condition, International Conference on Informatics for Development (ICID), 26 November, Yogyakarta, Indonesia. https://shorturl.at/yIWzV
W. Caesarendra, A. Widodo, P.H. Thom, B.S. Yang, (2010), Machine degradation prognostic based on RVM and ARMA/GARCH model for bearing fault simulated data, IEEE – Prognostics and System Health Management (PHM) Conference, 12-14 January, Macao, P.R. China. https://doi.org/10.1109/PHM.2010.5414586
S.W. Yang, A. Widodo, W. Caesarendra, J.S. Oh, M.C. Shim, S.J. Kim, B.S. Yang, W.H. Lee, (2009), Support vector machine and discrete wavelet transform method for strip rupture detection based on transient current signal, 4th World Congress on Engineering Asset Management (WCEAM), 28-30 September, Athens, Greece. https://doi.org/10.1007/978-0-85729-320-6_78

Keynote speaker

Keynote speaker in the 1st International Conference on Science and Technology (ICoScienTech), Semarang, Indonesia, 5 February 2025
Keynote speaker in the 6th International Conference Informatics, Multimedia, Cyber, and Information System (ICIMCIS), Jakarta, Indonesia, 20-21 November 2024.
Keynote speaker in the 8th Forum in Research, Science, and Technology (FIRST), Palembang, Indonesia, 21-22 October 2024.
Keynote speaker in the 2nd International Conference on Electronics, Biomedical Engineering, and Health Informatics (ICEBEHI), Surabaya, Indonesia, 3-4 November 2021.
Keynote speaker in the 6th International Workshop on Big Data and Information Security (IWBIS), Jakarta, Indonesia, 23-26 October 2021.
Keynote speaker in the 3rd International Conference on Contemporary Advances in Mechanical Engineering (ICCAME), Mohali Punjab, India, 27-28 August 2021.
Keynote speaker in the 2nd International Conference on Information System, Computer Science and Engineering (ICONISCSE), Palembang, Indonesia, 4-5 March 2021.
Keynote speaker in the 2nd International Conference on Informatics, Multimedia, Cyber and Information System (ICIMCIS), Jakarta, Indonesia, 19-20 November 2020.
Keynote speaker in the 1st The International Conference on Industrial Automation, Smart Grid and Its Application (ICIASGA), 2020, Madiun, Indonesia, 4-5 November 2020.
Keynote speaker in the 3rd IEEE International Conference on Electrical Engineering, Electronics and Computer Science (ICECOS 2019), Batam, Indonesia, 2-4 October 2019.
Keynote speaker in the 8th Engineering International Conference (EIC 2019), Semarang, Indonesia, 16-17 October 2019.
Keynote speaker in the International Conference on Applied Engineering (ICAE 2018), Batam, Indonesia, 3-4 October 2018.
Keynote speaker in the International Conference on Mechanical, Electronics, Computer and Industrial Technology (MECnIT 2017), Medan, Indonesia, 6-8 December 2017

Invited speaker

Invited speaker in the Frontier in Sustainable Agromaritime and Environmental Development Conference (FiSAED), Bogor, Indonesia, 19-20 December 2024.
Invited speaker in the 2nd International Conference on Nanomaterials and Advanced Composites (NAC 2019), Taipei, Taiwan, 9-11 August 2019.

Patents

Rilo Berdin Taqriban, Wahyu Caesarendra, Adi Suriyanto, Lisa Nurhasanah, Tri Ratna Dharma Putra, 2021, Defender Full Mask dengan Powered Air Purifying Respirator (DFM PAPR), 2021/SID/00331 (Filled). https://pdki-indonesia.dgip.go.id/search
Rifky Ismail, Adi Suriyanto, Wahyu Caesarendra, Prima Adhi Yudhistira, Mochammad Ariyanto, Yogi Reza Ramadhan, 2019, Prostetik Tangan Bionik Bawah Siku, 2019/S/00658 (Published). https://pdki-indonesia.dgip.go.id/search
Wahyu Caesarendra, Farika Tono Putri, Mochammad Ar iyanto, Joga Dharma Setiawan, Rifky Ismail, Elta Diah Pasmanasari, 2017, Metode Pendeteksian Penyakit Parkinson Dengan Menggunakan Pengenalan Pola Sinyal Suara dan Sinyal Electromyography (EMG), 2017/S/00089 (Published). https://pdki-indonesia.dgip.go.id/search

Research opportunities

Smart and intelligent manufacturing approach with embedded artificial intelligence method.
Machine vision application based deep learning algorithm for metal surface quality monitoring and defect detection.
Virtual monitoring system of a Universal Robot (UR3) using the platform of Gazebo and Robot Operating System (ROS).
Development of vibration condition monitoring and prognostic method for rotating machinery.
Welding post-process detection based on machine vision method.

Research grants

Development of bioinspired digital technologies, Universiti Brunei Darussalam, as a team member, B$ 268,000, 2023.
Comparative analyses of throttling sublimation and quenching evaporation-convection based mechanisms of cryogenic cooling with varying lengths of injection in machining of titanium and inconel alloys, Universiti Brunei Darussalam, as a team member, B$ 50,000, 2023.
Development of building models with vertical greenery systems for the thermal comfort and energy efficient buildings, Universiti Brunei Darussalam, as a co-investigator, B$ 70,000, 2023.
Development vertical greenery systems for thermal comfort and energy efficient buildings, Universiti Brunei Darussalam, as a co-investigator, B$ 24,380, 2023.
The synthesis of nanoscale hydroxyapatite from natural clamshell using optimized sonochemical method for biomedical and bone tissue regeneration application, Universiti Brunei Darussalam, as a co-investigator, B$ 37,710, 2022.
An embedded system using convolutional neural network model for online and real-time ECG signal classification and prediction, Universiti Brunei Darussalam, as a Principle investigator, B$ 14,450, 2022.
Study on the dynamic characteristics of Brunei’s bridges for the purpose of health condition monitoring and future maintenance, Universiti Brunei Darussalam, as a Principle investigator, B$ 15,550, 2022.
An imaging processing method and deep learning for automatic Cobb angle measurement in adolescent idiopathic scoliosis, Arbeitsgemeinschaft für Osteosynthesefragen (AO) Spine, as a co-investigator, CHF 5000, 2021.
Real-time surface quality monitoring for adaptive manufacturing process parameters with embedded deep learning method, Universiti Brunei Darussalam, as a Principle investigator, B$ 47,000, 2021.
Development of prosthetic hand-based EMG sensor for below elbow amputee in Indonesia, Diponegoro University, as a Principle investigator, IDR 200,000,000, 2018.
Development of low-cost hand exoskeleton for stroke patient, Diponegoro University, as a Principle investigator, IDR 50,000,000, 2017.

Consultancy project

An imaging processing method and deep learning for automatic Cobb angle measurement in adolescent idiopathic scoliosis, Feb 27, 2021 to Aug 26, 2021, [Client: Pantai Jerudong Specialist Center, Brunei].
EMG-based classification of hand gesture using PCA and SVM, 2021, [Client: Politeknik Negeri Batam, Indonesia].

HDR supervision

2 PhD (Completed) 4 PhD (Ongoing)
4 MPhil (Completed) 4 MPhil (Ongoing),
9 UG (Completed)

Professional activities

Editorial Board for Journal of Electronics, Electromedical Engineering and Medical Informatics. (2022 – present)
Editorial Board in Shock and Vibration Journal. (2019 – present)
Editorial Board in Jurnal Teknologi dan Sistem Komputer. (2019 – present)
Guest Editor in Symmetry Journal. SI: Symmetry in Mechanical Engineering III. (2021 – 2022)
Guest Editor in Sensors Journal. SI: Artificial Intelligence for Fault Diagnosis and Prognostics. (2020 – 2021)
Guest Editor in Micromachines Journal. SI: The Future of Microsystem for Smart Cities. (2020 – 2021)
Guest Editor in Symmetry Journal. SI: Symmetry in Mechanical Engineering II. (2019 – 2020)
Guest Editor in Shock and Vibration Journal. SI: Fault Diagnosis and Prognosis of Critical Components. (2015)
Reviewer for journals/conferences: Artificial Intelligence in Medicine (Elsevier); Automation in Construction (Elsevier); Measurements (Elsevier); Mechanical Systems and Signal Processing (Elsevier)
Simulation Modelling Practice and Theory (Elsevier); IEEE Access (IEEE); Electronics (MDPI); Machines (MDPI); Applied Sciences (MDPI); Sensors (MDPI); Energies (MDPI); Applied System Innovation (MDPI); Technologies (MDPI)

Professional associations

The Institute of Electrical and Electronics Engineers (IEEE)
Indonesian Engineers Association (Persatuan Insinyur Indonesia)

Nurul Amira

PhD, MSc, BEng (Hons)
Program Coordinator, Mechatronic Engineering
Lecturer, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 451
Tel: +60 85 630100 Ext:2434
Email: nurul.amira@curtin.edu.my

Research profiles

Google Scholar: https://scholar.google.com/citations?user=83ymIt8AAAAJ&hl=en&oi=ao
SCOPUS: https://www.scopus.com/authid/detail.uri?authorId=57214994411
ORCID: https://orcid.org/0000-0002-8965-6297

Awards

Post-Doctoral Fellowship, Universiti Malaysia Perlis (UniMAP), Malaysia
Best Paper Award, The 13th MUCET Conference on Engineering and Technology
Best PhD Thesis Award, Universiti Malaysia Perlis (UniMAP)
Excellent Masters Award, Universiti Teknologi MARA (UiTM Shah Alam)

Academic history

PhD in Mechatronic Engineering, Universiti Malaysia Perlis, Malaysia (2023)
MSc in Telecommunication and Information Engineering, Universiti Teknologi MARA (UiTM Shah Alam), Malaysia (2016)
BEng (Hons) Electronics (Instrumentation), Universiti Teknologi MARA (UiTM Shah Alam), Malaysia (2013)

Subject taught

Mechatronics Design Project
Microcontroller Project
Electrical Systems
Linear System and Control

Research interests

Electromagnetic theory, wireless communication
Radio communication networks and systems
Robotics and automation
Smart sensor
Sensor networks
Internet of Things (IoT)
Image processing (Tomography)

Selected publications

a. Journal publications

Mohd Ramli, N. A., Rahiman, M. H. F., Kamarudin, L. M., Mohamed, L., Zakaria, A., Ahmad, A., & Rahim, R. A. (2021). A New Method of Rice Moisture Content Determination Using Voxel Weighting-Based from Radio Tomographic Images. Sensors, Vol. 21, Issue. 11, IF: 3.9 [Q1]
Mohd Ramli, N. A., Rahiman, M. H. F., Kamarudin, L. M., Mohamed, L., Zakaria, A., & Abdullah, M. S. M. (2020). A Design and Development of a Wireless Sensor Network for Potential Monitoring and Localization. Journal of Electrical Engineering & Technology, Vol. 15, Issue. 6, IF: 1.9 [Q2]
Mohd Ramli, N. A., Rahiman, M. H. F., Kamarudin, L. M., Mohamed, L., Zakaria, A., Ahmad, A., Abdullah, M. S. M., & Rahim, R. A. (2025). Non-destructive Method for Moisture Content Sensing Inside a Rice Storage. International Journal of Integrated Engineering, Vol. 17, Issue. 2 IF: 0.6 [Q3]
Mohd Ramli, N. A., Rahiman, M. H. F., Kamarudin, L. M., Mohamed, L., Zakaria, A., Ahmad, A., Abdullah, M. S. M., & Rahim, R. A. (2024). Measurement of Rice Moisture Content Based-on Quantitative Analysis from Radio Tomography Images. Jurnal Teknologi, Vol. 86, Issue. 3, IF: 0.7 [Q3]
Wahab, A. A., Rosli, U. A., Harun, N. S., Mohd Ramli, N. A., Ramli, M. F., Lam, H. Y., & Rahiman, M. H. F. (2023). An Investigation of Microwave Tomography Technique to Image Brain Tumour Through Cross-Section Imaging with Different Number of Electrode. International Journal of Integrated Engineering, Vol. 15, Issue. 3, IF: 0.6 [Q3]
Abdullah, M. S. M., Rahiman, M. H. F., Khalid, N. S., Nasir, A. S. A., Mohd Ramli, N. A. (2024). Radio Tomography Imaging Using Adjacent Criterion Method to Determine the Localization Error. ECTI Transactions on Electrical Engineering, Electronics, and Communications, Vol. 22, Issue. 2, Scopus Indexed
Mohd Ramli, N. A., Rahiman, Law, H. Y. H., (2024). Design and Development of Green Trash Compactor for Recyclable Waste Management. Journal of Engineering Research and Education, Vol. 16, Issue 2024, MyCite Indexed
Mohd Ramli, N. A., Rahiman, M. H. F., Kamarudin, L. M., Mohamed, L., & Zakaria, A. (2021). A Potential Study on Radio Tomography to Localize the Moisture Distribution in Rice Silo. Journal of Tomography System & Sensors Application, Vol. 4, Issue. 1
Abdullah, M. S. M., Kurd, A. A. M., Rahiman, M. H. F., Mohd Ramli, N. A. (2025). Lighting System Based on the Human Presence for Daily Applications. Journal of Science and Technology, Vol. 30, Issue. 2.
Wahab, A. A., Rosli, U. A., Mohd Ramli, N. A., Rahiman, M. H. F., & Ramli, M. F. (2021). An Investigation of Microwave Tomography Technique to Detect Brain Tumour Through Cross-Section Imaging at Frequency 0.5 GHz to 1.5 GHz. Journal of Advanced Industrial Technology and Application, Vol. 2, Issue. 1

b. Conference proceedings

Rahiman M. H. F., Nayan, N. M., Zakaria, A., Kamarudin, L. M., Mohd Ramli, N. A., (2025). Design of a 2.4 GHz RF Sensor for Assessing Moisture Content in Dry Powders. IEEE Proceeding, pg.: 262-267 Scopus Indexed
Mohd Ramli, N. A., Rahiman, M. H. F., & Krishnan, K. K., (2023). Classification-based Method for Wall Crack Detection. Journal of Physics: Conference Series, Vol. 2641, Issue 1, Scopus Indexed
Mohd Ramli, N. A., Rahiman, M. H. F., Kamarudin, L. M., Mohamed, L., & Zakaria, A., (2019). A Review on Frequency Selection in Grain Moisture Content Detection. IOP Conference Series: Materials Science and Engineering, Vol. 705, Issue 1, Scopus Indexed

Research grants

18 Feb – 31 Dec 2025: Co-researcher, Curtin Malaysia Teaching Innovation Project (CMTIP) Scheme 2025, Interactive Guided Learning with Generative AI for Engineering Mechanics Student
01 July 2023 – 30 June 2024: Post-Doctoral Researcher, University Malaysia Perlis (UniMAP) Post Doctorate Grant Scheme, Imaging of Grain Moisture Profiles in Agricultural Silos Based-on Neural Network Scheme via Radio Frequency Tomography Assisted
Jan 2019 – December 2021: Graduate Research Assistant, Trans Disciplinary Research Grant Scheme (TRGS), A Localization of Moisture Distribution in Agricultural Silos via Sensor Networks and Artificial Intelligence Assisted (36 months)

Professional activities

Internship Supervisor, Omar Abdul Aziz Bin Razimi, Universiti Teknologi Brunei, 01 May – 31 July 2025
Safety and Health Committee, Faculty of Science and Engineering (FOES), Curtin University Malaysia
Book / Journal / Conference Reviewer
- Journal of Advanced Mechanical and Mechatronic Systems
- 9th International Conference on Man-machine Systems (ICoMMS 2025)
- Book: Bridging Ideas to Impact: A Journey Through Discovery and Innovation – Series 5, UTHM
Co-Chair Secretariate Committee, 17th International Conference on Materials Processing and Characterization (ICMPC 2025)
Post-graduate Examiner, (MPhil) Amanda Anne Mu Fuimay, Thermal and Acoustic Properties of Water Hyacinth-Palm Oil Fuel Ash Reinforced Polymer Composite for Structural Application, Curtin University Malaysia.
Club Advisor, Curtin Robotics Club, Curtin University Malaysia
Technical Committee
- International Conference on Sports, Sciences and Management, Universiti Malaysia Perlis (2025)
- International Workshop on Computed Tomography & Imaging Technology, Malaysian Society of Computed Tomography & Imaging Technology (2021)
STEM Activities
- STEM Trailblazers 2025, organized by MEITD Sarawak & Curtin University Malaysia, 18 – 19 July 2025
- STEM Educational Program, organized by Curtin University Malaysia & SMK Julau 2, 04 July 2025
- Mechatronics Engineering Workshop, organized by International Student Recruitment, Curtin University Malaysia, 16 May 2025
- STEM Educational Program, organized by Curtin University Malaysia & SMKA Miri, 06 – 07 Jan 2025
- TECHDESIGN: 2D and 3D Engineering Drawing Challenge, Curtin IMechE Club, 05 Oct 2024

Professional associations

Malaysia Board of Technologist, Graduate Technologist
Board of Engineers Malaysia, Graduate Engineer

Mouaz Al-Kouzbary

PhD, MEng. Sc., BSc
Lecturer, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 329
Tel: +60 85 630100 Ext:2455
Email: mouaz.k@curtin.edu.my

Research profiles

Scopus Profile: https://www.scopus.com/authid/detail.uri?authorId=57202956887
Google Scholar: https://scholar.google.com/citations?hl=en&user=8Lc3UKUAAAAJ
Web of Science ResearcherID: https://www.webofscience.com/wos/author/record/K-7347-2017?msg_guid=cBh8p5jMRwiVD09J5k4N4AIocu0
ORCID: https://orcid.org/0000-0001-9678-875X
ResearchGate: https://www.researchgate.net/profile/Mouaz-Kouzbary

Background

Dr. Mouaz Al Kouzbary is a dedicated academic and researcher in Mechanical and Mechatronics Engineering. As a Lecturer at Curtin University, he brings extensive experience from his doctoral studies and previous roles at Universiti Malaya and BioApps Sdn. Bhd. His research sits at the intersection of biomechanics, robotics, and prosthetics, where he develops cutting-edge solutions to advance assistive technologies. Dr. Al Kouzbary has a robust publication record as first author in top-tier journals, contributing significant work on chaotic time-series analysis of human gait, optimization of robotic knee prostheses, and universal control systems for powered ankle-foot devices. His technical proficiency includes embedded systems, additive manufacturing, and advanced programming, which he applies to drive innovation in intelligent robotic systems.

Academic history

Doctoral Degree in Mechanical Engineering, Universiti Malaya, 2025
Master Degree in Engineering (Mechanical), Universiti Malaya, 2019
Bachelor Degree in Mechatronics Engineering, University of Aleppo, 2015

Research interests

Robotic Prostheses
Advanced Control System
AI-based Control, Gait Analysis
IMU-based gait measurement and analysis

Selected publications

a. Journal publications

Al-Hashimi, Z., Khamis, T., Al Kouzbary, M. et al. A decade of machine learning in lithium-ion battery state estimation: a systematic review. Ionics (2025)
Al Kouzbary, Mouaz, Hamza Al Kouzbary, Jingjing Liu, Hanie Nadia Shasmin, Nooranida Arifin, and Noor Azuan Abu Osman. 2024. “Analysis of Human Ambulation as a Chaotic Time-Series: With Nonlinear Dynamics Tools.” Computer Methods in Biomechanics and Biomedical Engineering
Taha Khamis, Abd Alghani Khamis, Mouaz Al Kouzbary, Hamza Al Kouzbary, Hamam Mokayed, Nasrul Anuar AbdRazak, Noor Azuan Abu Osman, Automated transtibial prosthesis alignment: A systematic review, Artificial Intelligence in Medicine, Volume 156,2024
Liu J, Liu J, Cheah PY, Al Kouzbary M, Al Kouzbary H, Yao SX, et al. (2024) Design and preliminary verification of a novel powered ankle–foot prosthesis: From the perspective of lower-limb biomechanics compared with ESAR foot. PLoS ONE
Tham, L.K., Al Kouzbary, M., Al Kouzbary, H. et al. Estimation of body segmental orientation for prosthetic gait using a nonlinear autoregressive neural network with exogenous inputs. Phys Eng Sci Med 46, 1723–1739 (2023)
Hartani Mohamed Amine, Al Kouzbary Mouaz, Hamouda Messaoud, Abdelkhalek Othmane, Mekhilef Saad,Contribution to strengthening Bus voltage stability and power exchange balance of a decentralized DC-multi-microgrids: Performance assessment of classical, optimal, and nonlinear controllers for hybridized energy storage systems control,Sustainable Cities and Society, Volume 96, 2023
Liu, Jingjing, Muhammad Awais Naeem, Mouaz Al Kouzbary, Hamza Al Kouzbary, Hanie Nadia Shasmin, Nooranida Arifin, Nasrul Anuar Abd Razak, and Noor Azuan Abu Osman. 2023. “Effect of Infill Parameters on the Compressive Strength of 3D-Printed Nylon-Based Material” Polymers
Al Kouzbary, Mouaz, Hamza Al Kouzbary, Jingjing Liu, Taha Khamis, Zaina Al-Hashimi, Hanie Nadia Shasmin, Nooranida Arifin, and Noor Azuan Abu Osman. 2022. “Robotic Knee Prosthesis with Cycloidal Gear and Four-Bar Mechanism Optimized Using Particle Swarm Algorithm” Actuators
Liu, J., Abu Osman, N., Al Kouzbary, M. et al. Stiffness estimation of planar spiral spring based on Gaussian process regression. Sci Rep 12, 11217 (2022)
Hartani Mohamed Amine, Al Kouzbary Mouaz, Hamouda messaoud, Abdelkhalek Othmane, Mekhilef Saad, The impacts of control systems on hybrid energy storage systems in remote DC-Microgrid system: A comparative study between PI and super twisting sliding mode controllers, Journal of Energy Storage, Volume 47, 2022
Liu, J., Osman, N.A.A., Kouzbary, M.A. et al. Optimization and Comparison of Typical Elastic Actuators in Powered Ankle-foot Prosthesis. Int. J. Control Autom. Syst. 20, 232–242 (2022)
H. A. Kouzbary, M. A. Kouzbary, L. K. Tham, J. Liu, H. N. Shasmin and N. A. Abu Osman, “Generating an Adaptive and Robust Walking Pattern for a Prosthetic Ankle–Foot by Utilizing a Nonlinear Autoregressive Network With Exogenous Inputs,” in IEEE Transactions on Neural Networks and Learning Systems, vol. 33, no. 11, pp. 6297-6305, Nov. 2022
L. K. Tham, N. A. A. Osman, M. A. Kouzbary and K. Aminian, “Biomechanical Ambulatory Assessment of 3D Knee Angle Using Novel Inertial Sensor-Based Technique,” in IEEE Access, vol. 9, pp. 36559-36570, 2021
Liu, J., Abu Osman, N. A., Al Kouzbary, M., Al Kouzbary, H., Abd Razak, N. A., Shasmin, H. N., and Arifin, N. (January 28, 2021). “Classification and Comparison of Mechanical Design of Powered Ankle–Foot Prostheses for Transtibial Amputees Developed in the 21st Century: A Systematic Review.” ASME. J. Med. Devices. March 2021
Al Kouzbary, M., Abu Osman, N.A., Al Kouzbary, H. et al. Towards Universal Control System for Powered Ankle–Foot Prosthesis: A Simulation Study. Int. J. Fuzzy Syst. 22, 1299–1313 (2020)
Al Kouzbary M, Abu Osman NA, Abdul Wahab AK. Sensorless control system for assistive robotic ankle-foot. International Journal of Advanced Robotic Systems. 2018
A Joukhadar, I Hasan, A Alsabbagh and M Alkouzbary, “Integral Lqr-Based 6dof Autonomous Quadrocopter Balancing System Control” International Journal of Advanced Research in Artificial Intelligence (IJARAI), 4(5), 2015

b. Conferences

Towards Automated Classification for Scoliosis Brace: Data Preprocessing for AI Classifier, Biomed 2024/APOSM 2024.
Robotic ankle-foot prosthesis: how to deal with uncertainty, The 11th Asia-Pacific Conference on Biomechanics 2021.
A Combinational Approach to Generate Nonlinear foot Trajectories for Robotic Prosthesis with Elementary Clinical Results, BioMed2021.

Min Khant

PhD, BEng (Hons)
Teaching Fellow, Mechanical & Mechatronic Engineering Department

Location: Skylark 3, Room 447
Tel: +60 85 630100 Ext:2505
Email: minkhant@curtin.edu.my

Research profiles

Scopus: https://www.scopus.com/authid/detail.uri?authorId=58046071500
Google Scholar: https://scholar.google.com/citations?user=P3Hh1goAAAAJ&hl=en
Web of Science: https://www.webofscience.com/wos/author/record/HIA-0725-2022
ORCID: https://orcid.org/0000-0002-5793-0204

Background

Dr Min Khant is a Teaching Fellow in the Department of Mechanical and Mechatronics Engineering at Curtin University Malaysia. His work focuses on the intersection of artificial intelligence and biomechanics, with expertise in developing machine learning models to estimate muscle activity and analyze human motion using wearable sensor data. He aims to bridge AI and biological systems to create practical, human-centered solutions, while contributing to interdisciplinary research, education, and industry.

Awards

Monash University School of Engineering Publication Awards, 2025

Academic history

Doctoral of Philosophy (Engineering) (Specialisation: Artificial Intelligence), Monash University, Malaysia, 2025
Bachelor of Mechatronics Engineering (Hons), Monash University, Malaysia, 2019

Professional history

Teaching fellow, Curtin University Malaysia, 2025 to present
Teaching assistant, Monash University, Malaysia, 2024 to 2025
Programming helpdesk assistant, Monash University, Malaysia, 2024
Software developer, Tu Min Thin, 2019 to 2021

Research interests

Machine learning / AI in biomechanics
Wearable sensors in biomechanics
Digital health
Robotic prostheses

Selected publications

a. Journal publications

Khant, Min, Darwin Gouwanda, Alpha A. Gopalai, and Chee Choong Foong. “Integrating deep learning in stride-to-stride muscle activity estimation of young and old adults with wearable inertial measurement units.” Scientific Reports 15, no. 1 (2025): 24783.
Khant, Min, Darwin Gouwanda, Alpha A. Gopalai, King Hann Lim, and Chee Choong Foong. “Estimation of lower extremity muscle activity in gait using the wearable inertial measurement units and neural network.” Sensors 23, no. 1 (2023): 556.
Perera, Chamalka Kenneth, Zakia Hussain, Min Khant, Alpha Agape Gopalai, Darwin Gouwanda, and Siti Anom Ahmad. “A motion capture dataset on human sitting to walking transitions.” Scientific Data 11, no. 1 (2024): 878.

b. Conferences publications

Khant, Min, Daniel Ts Lee, Darwin Gouwanda, Alpha A. Gopalai, King Hann Lim, and Chee Choong Foong. “A Neural Network Approach to Estimate Lower Extremity Muscle Activity during Walking.” In 2022 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), pp. 106-111. IEEE, 2022.
Khant, Min, Darwin Gouwanda, Alpha A. Gopalai, King Hann Lim, and Chee Choong Foong. “A combination of feature extraction and feedforward neural network to estimate muscle activity in human gait.” In TENCON 2023-2023 IEEE Region 10 Conference (TENCON), pp. 975-980. IEEE, 2023.

Research projects

Local LLM Chatbot, 2025
Godot RPG Game, 2025

Professional activities

IECBES 2024 Organizing Committee, 2024
IECBES 2022 Organizing Committee, 2022
Head Of Intelligent System Shell Eco-Marathon Competition, 2018

Professional associations

Graduate Engineer with Board of Engineers Malaysia (BEM)